Direct observation of substitutional-atom trapping on a metal surface

A problem was presented to observe the packing densities of deposits of sub-micron corrosion product particles. The deposits were 5-100 mils thick and had formed on the inside surfaces of 3/8 inch diameter Zircaloy-2 heat exchanger tubes. The particles were iron oxides deposited from flowing water and consequently were only weakly bonded. Particular care was required during handling to preserve the original formations of the deposits. The specimen preparation method described below allowed direct observation of cross sections of the deposit layers by transmission electron microscopy.The specimens were short sections of the tubes (about 3 inches long) that were carefully cut from the systems. The insides of the tube sections were first coated with a thin layer of a fluid epoxy resin by dipping. This coating served to impregnate the deposit layer as well as to protect the layer if subsequent handling were required.

Download Full-text

Application of a Simple Cold Stub to the Direct Observation of Frozen Hydrated Sand

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100071508 ◽

1973 ◽

Vol 31 ◽

pp. 212-213

Author(s):

John M. Wehrung ◽

Richard J. Harniman

Keyword(s):

United States ◽

Surface Water ◽

Direct Observation ◽

Controlled Study ◽

Clay Particles ◽

Organic Debris ◽

Rock Formations ◽

Water Tables ◽

Permeable Rock ◽

Natural Means

Water tables in aquifer regions of the southwest United States are dropping off at a rate which is greater than can be replaced by natural means. It is estimated that by 1985 wells will run dry in this region unless adequate artificial recharging can be accomplished. Recharging with surface water is limited by the plugging of permeable rock formations underground by clay particles and organic debris.A controlled study was initiated in which sand grains were used as the rock formation and water with known clay concentrations as the recharge media. The plugging mechanism was investigated by direct observation in the SEM of frozen hydrated sand samples from selected depths.

Download Full-text

Direct Observation of the Diffusionless β → β + ω Transformation in Titanium Alloys

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100064669 ◽

1971 ◽

Vol 29 ◽

pp. 122-123

Author(s):

N. E. Paton ◽

D. de Fontaine ◽

J. C. Williams

Keyword(s):

Electron Microscope ◽

Titanium Alloys ◽

Direct Observation ◽

Dark Field ◽

X Ray Diffraction ◽

Resistivity Measurements ◽

Selected Area Electron Diffraction ◽

Ti Alloys ◽

Thin Foils ◽

Field Device

The electron microscope has been used to study the diffusionless β → β + ω transformation occurring in certain titanium alloys at low temperatures. Evidence for such a transformation was obtained by Cometto et al by means of x-ray diffraction and resistivity measurements on a Ti-Nb alloy. The present work shows that this type of transformation can occur in several Ti alloys of suitable composition, and some of the details of the transformation are elucidated by means of direct observation in the electron microscope.Thin foils were examined in a Philips EM-300 electron microscope equipped with a uniaxial tilt, liquid nitrogen cooled, cold stage and a high resolution dark field device. Selected area electron diffraction was used to identify the phases present and the ω-phase was imaged in dark field by using a (101)ω reflection. Alloys were water quenched from 950°C, thinned, and mounted between copper grids to minimize temperature gradients in the foil.

Download Full-text

A New 1000kv Electron Microscope

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100062415 ◽

1969 ◽

Vol 27 ◽

pp. 100-101

Author(s):

J.L. Williams ◽

K. Heathcote ◽

E.J. Greer

Keyword(s):

Electron Microscope ◽

Direct Observation ◽

High Voltage ◽

Three Dimensional ◽

Dimensional Structure ◽

Specimen Thickness ◽

Voltage Electron ◽

High Voltage Electron Microscope ◽

Dynamic Experiments ◽

Conventional Instrument

High Voltage Electron Microscope already offers exciting experimental possibilities to Biologists and Materials Scientists because the increased specimen thickness allows direct observation of three dimensional structure and dynamic experiments on effectively bulk specimens. This microscope is designed to give maximum accessibility and space in the specimen region for the special stages which are required. At the same time it provides an ease of operation similar to a conventional instrument.

Download Full-text

Electrochemical nucleation and growth of copper on iron and aluminum: A TEM study of industrial copper cementation

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100109410 ◽

1978 ◽

Vol 36 (1) ◽

pp. 454-455

Author(s):

L.E. Murr ◽

V. Annamalai

Keyword(s):

Metal Surface ◽

Copper Deposit ◽

Nucleation And Growth ◽

16Th Century ◽

Electrochemical Reactions ◽

Mine Shaft ◽

De Re ◽

Copper Precipitation ◽

Electrochemical Nucleation ◽

Interesting System

Georgius Agricola in 1556 in his classical book, “De Re Metallica”, mentioned a strange water drawn from a mine shaft near Schmölnitz in Hungary that eroded iron and turned it into copper. This precipitation (or cementation) of copper on iron was employed as a commercial technique for producing copper at the Rio Tinto Mines in Spain in the 16th Century, and it continues today to account for as much as 15 percent of the copper produced by several U.S. copper companies.In addition to the Cu/Fe system, many other similar heterogeneous, electrochemical reactions can occur where ions from solution are reduced to metal on a more electropositive metal surface. In the case of copper precipitation from solution, aluminum is also an interesting system because of economic, environmental (ecological) and energy considerations. In studies of copper cementation on aluminum as an alternative to the historical Cu/Fe system, it was noticed that the two systems (Cu/Fe and Cu/Al) were kinetically very different, and that this difference was due in large part to differences in the structure of the residual, cement-copper deposit.

Download Full-text