A novel approach to micro-sample X-ray powder diffraction using nylon loops

2003 ◽  
Vol 36 (6) ◽  
pp. 1480-1481 ◽  
Author(s):  
Nattamai S. P. Bhuvanesh ◽  
Joseph H. Reibenspies
Keyword(s):  
Single Crystal ◽  
Diffraction Pattern ◽  
Powder Diffraction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Area Detector ◽  
Novel Approach ◽  
Novel Method

A novel method for sample mounting to obtain powder diffraction from very small amounts of samples (ranging from micrograms down to a few nanograms), by using a combination of multiwire area detector, three-circle diffractometer, monochromatic CuKα radiation and 10 µm nylon loops, has been developed. This method exploits customary single-crystal approaches to collect the powder diffraction pattern, which overcomes many of the limitations of conventional powder X-ray diffraction.

Electron Microscopy of Shock Loaded Polycrystalline Beryllium

1974 ◽  
Vol 32 ◽  
pp. 506-507 ◽  
Author(s):  
J. M. Galbraith ◽  
L. E. Murr ◽  
A. L. Stevens
Keyword(s):  
Electron Microscopy ◽  
Wave Propagation ◽  
Structural Change ◽  
Single Crystal ◽  
Diffraction Pattern ◽  
Shock Loading ◽  
Slip Systems ◽  
Compression Tests ◽  
X Ray Diffraction ◽  
X Ray

Uniaxial compression tests and hydrostatic tests at pressures up to 27 kbars have been performed to determine operating slip systems in single crystal and polycrystal1ine beryllium. A recent study has been made of wave propagation in single crystal beryllium by shock loading to selectively activate various slip systems, and this has been followed by a study of wave propagation and spallation in textured, polycrystal1ine beryllium. An alteration in the X-ray diffraction pattern has been noted after shock loading, but this alteration has not yet been correlated with any structural change occurring during shock loading of polycrystal1ine beryllium.This study is being conducted in an effort to characterize the effects of shock loading on textured, polycrystal1ine beryllium. Samples were fabricated from a billet of Kawecki-Berylco hot pressed HP-10 beryllium.

scholarly journals Magnetically Oriented Powder Crystal to Indexing and Structure Determination

2014 ◽  
Vol 70 (a1) ◽  
pp. C1560-C1560
Author(s):  
Fumiko Kimura ◽  
Wataru Oshima ◽  
Hiroko Matsumoto ◽  
Hidehiro Uekusa ◽  
Kazuaki Aburaya ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
Crystal Lattice ◽  
Powder Diffraction ◽  
Diffraction Method ◽  
Lattice Parameters ◽  
X Ray Diffraction ◽  
X Ray ◽  
Crystal Lattice Parameters

In pharmaceutical sciences, the crystal structure is of primary importance because it influences drug efficacy. Due to difficulties of growing a large single crystal suitable for the single crystal X-ray diffraction analysis, powder diffraction method is widely used. In powder method, two-dimensional diffraction information is projected onto one dimension, which impairs the accuracy of the resulting crystal structure. To overcome this problem, we recently proposed a novel method of fabricating a magnetically oriented microcrystal array (MOMA), a composite in which microcrystals are aligned three-dimensionally in a polymer matrix. The X-ray diffraction of the MOMA is equivalent to that of the corresponding large single crystal, enabling the determination of the crystal lattice parameters and crystal structure of the embedded microcrytals.[1-3] Because we make use of the diamagnetic anisotropy of crystal, those crystals that exhibit small magnetic anisotropy do not take sufficient three-dimensional alignment. However, even for these crystals that only align uniaxially, the determination of the crystal lattice parameters can be easily made compared with the determination by powder diffraction pattern. Once these parameters are determined, crystal structure can be determined by X-ray powder diffraction method. In this paper, we demonstrate possibility of the MOMA method to assist the structure analysis through X-ray powder and single crystal diffraction methods. We applied the MOMA method to various microcrystalline powders including L-alanine, 1,3,5-triphenyl benzene, and cellobiose. The obtained MOMAs exhibited well-resolved diffraction spots, and we succeeded in determination of the crystal lattice parameters and crystal structure analysis.

Structure Refinements of the Layered Intergrowth Phases SbIIISbV x A 1−x TiO6 (x≃0, A = Ta, Nb) Using Synchrotron X-ray Powder Diffraction Data

1997 ◽  
Vol 53 (6) ◽  
pp. 861-869 ◽  
Author(s):  
C. D. Ling ◽  
J. G. Thompson ◽  
S. Schmid ◽  
D. J. Cookson ◽  
R. L. Withers
Keyword(s):  
Single Crystal ◽  
Powder Diffraction ◽  
Diffraction Data ◽  
Homologous Series ◽  
Rietveld Method ◽  
Powder Diffraction Data ◽  
X Ray Diffraction ◽  
Synchrotron Source ◽  
X Ray ◽  
The Family

The structures of the layered intergrowth phases SbIIISb^{\rm V}_xAl-xTiO6 (x \simeq 0, A = Ta, Nb) have been refined by the Rietveld method, using X-ray diffraction data obtained using a synchrotron source. The starting models for these structures were derived from those of Sb^{\rm III}_3Sb^{\rm V}_xA 3−xTiO14 (x = 1.26, A = Ta and x = 0.89, A = Nb), previously solved by single-crystal X-ray diffraction. There were no significant differences between the derived models and the final structures, validating the approach used to obtain the models and confirming that the n = 1 and n = 3 members of the family, Sb^{\rm III}_nSb^{\rm V}_xA n−xTiO4n+2 are part of a structurally homologous series.

Powder X-ray diffraction data for Ba4ZnTi11O27 and Ba2ZnTi5O13

1994 ◽  
Vol 9 (1) ◽  
pp. 56-62 ◽  
Author(s):  
C. G. Lindsay ◽  
C. J. Rawn ◽  
R. S. Roth
Keyword(s):  
Single Crystal ◽  
Single Crystals ◽  
Powder Diffraction ◽  
Diffraction Data ◽  
Lattice Parameters ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Dimensions ◽  
Powder Samples ◽  
Unit Cell Dimensions

Single crystals and powder samples of Ba4ZnTi11O27 and Ba2ZnTi5O13 have been synthesized and studied using single-crystal X-ray precession photographs and X-ray powder diffraction. Unit cell dimensions were calculated from a least-squares refinement with a final maximum Δ2θ of 0.05°. Both phases were found to have monoclinic cells, space group C2/m. The refined lattice parameters for the Ba4ZnTi11O27 compound are a= 19.8687(8) Å, b=11.4674(5) Å, c=9.9184(4) Å, β= 109.223(4)°, and Z=4. The refined lattice parameters for the Ba2ZnTi5O13 compound are a= 15.2822(7) Å, b=3.8977(1) Å, c=9.1398(3) Å, β=98.769(4)°, and Z=2.

On racemic and L-malates: a comparison of their crystal structures

2004 ◽  
Vol 219 (2) ◽  
Author(s):  
Michel Fleck ◽  
Ekkehart Tillmanns ◽  
Ladislav Bohatý ◽  
Peter Held
Keyword(s):  
Single Crystal ◽  
Crystal Structures ◽  
Powder Diffraction ◽  
Diffraction Data ◽  
Monoclinic Space Group ◽  
Powder Diffraction Data ◽  
X Ray Diffraction ◽  
Powder Diffraction File ◽  
Space Group ◽  
X Ray

AbstractThe crystal structures of eight different L-malates have been determined and refined from single-crystal X-ray diffraction data. The compounds are the monoclinic (space groupIn addition, for all the compounds, powder diffraction data were collected, analysed and submitted to the powder diffraction file (PDF).

Crystal chemistry of the compound Sr2Bi2CuO6

1990 ◽  
Vol 5 (1) ◽  
pp. 46-52 ◽  
Author(s):  
R. S. Roth ◽  
C. J. Rawn ◽  
L. A. Bendersky
Keyword(s):  
Electron Diffraction ◽  
Single Crystal ◽  
Diffraction Pattern ◽  
Crystal Chemistry ◽  
Superconducting Phase ◽  
X Ray Diffraction ◽  
Monoclinic Symmetry ◽  
X Ray ◽  
Symmetry Space ◽  
Symmetry Space Group

The compound Sr2Bi2CuO6 should nominally be the phase with n = 1 of the high Tc superconducting series Sr2Bi2CanO4+2n. However, the superconducting phase with n = 1 (with no CaO) occurs only with a gross deficiency in SrO content. Instead, at the composition Sr2Bi2CuO6, a different phase is formed with an x-ray diffraction pattern considerably different from that expected for the n −1 member of the series. This phase has been found, by a combination of electron diffraction and single crystal and powder x-ray diffraction, to have a commensurate lattice with monoclinic symmetry, space group C2/m or Cm, a = 24.473 (2), b = 5.4223 (5), c = 21.959 (2)A, and β = 105.40 (1)°. The actual composition of this phase may be deficient in CuO by as much as 1.0 mole %.

Powder X-Ray Data for Synthetic Anhydrous Sodium Zirconium Silicates

1987 ◽  
Vol 2 (3) ◽  
pp. 176-179 ◽  
Author(s):  
G. Wilson ◽  
F. P. Glasser
Keyword(s):  
Solid State ◽  
Diffraction Pattern ◽  
Powder Diffraction ◽  
Solid State Reaction ◽  
The Other ◽  
X Ray Diffraction ◽  
Powder Diffraction File ◽  
X Ray ◽  
Sodium Zirconium ◽  
Diffraction Patterns

AbstractA systematic survey of phase formation in the Na2O-ZrO2-SiO2 system has revealed inconsistencies in the number and identity of ternary phases, and of their X-ray powder data. The phases Na2ZrSiO5, Na4Zr2Si3O12, Na2ZrSi2O7 and Na2ZrSi4O11 were prepared by solid-state reaction and their experimental X-ray diffraction patterns measured. Calculated X-ray diffraction patterns were generated by computer, using published crystallographic data, and critically compared with the experimentally observed values. The unit-cell constants were redefined to a greater accuracy than the presently accepted values published in the Powder Diffraction File. Only Na4Zr2Si3O12 produced an X-ray diffraction pattern which agreed with that previously published; those from the other phases were significantly different in both the intensities and positions of the reflections. Data for synthetic Na2ZrSi4O11 identical to the mineral vlasovite are reported.

scholarly journals X-Ray Diffraction from Magnetically Oriented Microcrystal Suspension

2014 ◽  
Vol 70 (a1) ◽  
pp. C1136-C1136
Author(s):  
Kazuaki Aburaya ◽  
Chiaki Tsuboi ◽  
Fumiko Kimura ◽  
Kenji Matsumoto ◽  
Masataka Maeyama ◽  
...  
Keyword(s):  
Single Crystal ◽  
Magnetic Circuit ◽  
X Ray Diffraction ◽  
Glass Capillary ◽  
Uv Curable ◽  
X Ray ◽  
Novel Method ◽  
Diffraction Patterns ◽  
Magnetic Field Generator

A three dimensionally magnetically oriented microcrystal array (3D-MOMA) is attractive to determination of a crystal structure as well as a molecular structure because it does not require a single crystal with sufficient size and quality for diffraction studies. We have developed a novel method to fabricate 3D-MOMA and determined several crystal structures using the 3D-MOMAs[1],[2]. However, the structure determination through MOMA requires a solidification treatment with UV curable monomer prior to X-ray diffraction experiment. We have developed a new X-ray diffractometer equipped with a magnetic field generator, which makes it possible to collect diffraction data without the solidification treatment. In this poster, we describe X-ray diffraction analyses of a magnetically oriented microcrystal suspension (MOMS) of L-alanine without the solidification treatment. A suspension of L-alanine microcrystals was poured in a glass capillary and rotated at a constant speed in a magnetic circuit attached in the X-ray diffractometer. Then, diffraction images were collected every 60 seconds. In the initial phase, the diffraction pattern showed a broad shape similar to that from a powder sample. As time goes on, diffraction patterns have gradually changed to single-crystal like patterns. After 2 hours, the shape of diffraction spots became as sharp as that of a single crystal. This observation shows that the microcrystals are oriented in the same direction. Owing to the improvement of the magnetic circuit and X-ray diffractometer, the quality of the diffraction has been greatly improved compared to that reported previously[3]. Further details of the analyses will be shown in the poster.

Sign in / Sign up

Export Citation Format

Share Document