Morphological characterization of ion-sputtered C–Ag, C/C–Ag and Ag/C films by GISAXS

1999 ◽  
Vol 32 (2) ◽  
pp. 226-233 ◽  
Author(s):  
D. Babonneau ◽  
A. Naudon ◽  
D. Thiaudière ◽  
S. Lequien

A carbon–silver thin film (33 at.% Ag and thickness of 2100 Å) has been synthesized by co-sputtering of a C–Ag target and characterized by grazing-incidence small-angle X-ray scattering (GISAXS), a technique that gives a considerably enhanced surface sensitivity. Experiments have been carried out at or near the critical angle of the layer. It is shown that, because C and Ag show no mutual solubility, a demixing occurs during the co-deposition process and silver clusters form within an amorphous carbon matrix. Using different incident angles of the X-ray beam, it is demonstrated that two populations of clusters are present in the layer: some large and nearly spherical on the surface, others smaller and elongated along the direction of the growth of the thin film in the bulk. In the case of a C/C–Ag bilayer, the surface diffusion is avoided just after the co-deposition process and it is shown that only the small and elongated clusters in the bulk are formed. In the case of a very thin Ag/C layer, there is only surface diffusion and it is shown that large silver islands are formed on the carbon surface. Such experiments demonstrate that the growth mechanism that takes place during the co-deposition process involves mainly a surface diffusion of silver and carbon atoms, as opposed to a volume diffusion.

Author(s):  
Jonathan Ogle ◽  
Daniel Powell ◽  
Eric Amerling ◽  
Detlef Matthias Smilgies ◽  
Luisa Whittaker-Brooks

<p>Thin film materials have become increasingly complex in morphological and structural design. When characterizing the structure of these films, a crucial field of study is the role that crystallite orientation plays in giving rise to unique electronic properties. It is therefore important to have a comparative tool for understanding differences in crystallite orientation within a thin film, and also the ability to compare the structural orientation between different thin films. Herein, we designed a new method dubbed the mosaicity factor (MF) to quantify crystallite orientation in thin films using grazing incidence wide-angle X-ray scattering (GIWAXS) patterns. This method for quantifying the orientation of thin films overcomes many limitations inherent in previous approaches such as noise sensitivity, the ability to compare orientation distributions along different axes, and the ability to quantify multiple crystallite orientations observed within the same Miller index. Following the presentation of MF, we proceed to discussing case studies to show the efficacy and range of application available for the use of MF. These studies show how using the MF approach yields quantitative orientation information for various materials assembled on a substrate.<b></b></p>


2019 ◽  
Vol 52 (2) ◽  
pp. 247-251
Author(s):  
Detlef-M. Smilgies

Recently, surface and thin-film studies using area detectors have become prevalent. An important class of such systems are lamellar thin films formed by small molecules, liquid crystals or semicrystalline polymers. Frequently, the lamellae align more or less parallel to the substrate. Such structures can be easily discerned by their characteristic X-ray scattering close to the incident plane. This paper describes how such patterns can be simulated, in order to extract morphological information about the thin film.


1995 ◽  
Vol 39 ◽  
pp. 659-664 ◽  
Author(s):  
Kenji Ishida ◽  
Akinori Kita ◽  
Kouichi Hayashi ◽  
Toshihisa Horiuchi ◽  
Shoichi Kal ◽  
...  

Thin film technology is rapidly evolving today, and the characterization of the thin film and its surface have become very important issue not only from scientific but also technological viewpoints. Although x-ray diffraction measurements have been used as suitable evaluation methods in crystallography studies, its application to the structural evaluation of the thin films, especially organic one having the low electron densities, is not easy due to the small amounts of scattering volume and the high obstructive scattering noise from the substrate. However, the x-ray diffraction measurements under grazing incidence will aid not only in overcoming the such problems but also in analyzing in-plane structure of the thin films. Therefore, so-called grazing incidence x-ray diffraction (GIXD) has been recognized as one of the most powerful tools for the surface and thin film studies.


2014 ◽  
Vol 83 (12) ◽  
Author(s):  
M A Shcherbina ◽  
S N Chvalun ◽  
Sergey Anatol'evich Ponomarenko ◽  
Mikhail Valentinovich Kovalchuk

Langmuir ◽  
2009 ◽  
Vol 25 (16) ◽  
pp. 9500-9509 ◽  
Author(s):  
Darren R. Dunphy ◽  
Todd M. Alam ◽  
Michael P. Tate ◽  
Hugh W. Hillhouse ◽  
Bernd Smarsly ◽  
...  

1994 ◽  
Vol 356 ◽  
Author(s):  
S. G. Malhotra ◽  
Z. U. Rek ◽  
L. J. Parfitt ◽  
S. M. Yalisove ◽  
J. C. Bilello

AbstractTraditionally, the magnitude of the stress in a thin film is obtained by measuring the curvature of the film-substrate couple; however, these techniques all measure the average stress throughout the film thickness. On a microscopic level, the details of the strain distribution as a function of depth through the thickness of the film can have important consequences in governing film quality and ultimate morphology. A new method for determining the magnitude of principal strains (strain eigenvalues) as a function of x-ray penetration depth using grazing incidence x-ray scattering for a polycrystalline thin film will be described. Results are reported for two Mo metallizations ˜ 500 Å and ˜1000 Å thick sputtered onto Si {100} substrates. The magnitude of the principal strains at several penetration depths was accomplished by an analysis of the diffraction peak shifts of at least six independent {hkl} scattering vectors from the Mo thin films. An out-of-plane strain gradient was identified in both Mo films and the strain eigenvalues were found to be anisotropic in nature. This new methodology should work with a variety of thin films and hence would provide quantitative insight into the evolution of thin film microstructure.


2014 ◽  
Vol 70 (a1) ◽  
pp. C1774-C1774
Author(s):  
Daniel Többens ◽  
Kai Neldner ◽  
Laura Valle-Rios ◽  
Susan Schorr

The compound semiconductor Cu2ZnSnS4 (CZTS) is a promising alternative for absorber layers in thin film solar cells, as it has a nearly ideal band gap of about 1.5 eV, a high absorption coefficient for visible light, and contains only earth abundant and non-toxic elements. Besides chemical composition and phase purity, the efficiency of CZTS thin film solar cells depends strongly on the concentration of Cu- and Zn-antisites and copper vacancies in the kesterite-type structure. However, Cu(I) and Zn(II) are isoelectric and thus cannot be distinguished by conventional X-ray diffraction. In prior work we determined Cu-Zn-distribution successfully from neutron scattering [1]. Here we present experiments utilizing anomalous X-ray diffraction on the K-edges of Cu and Zn. Anomalous scattering coefficients are heavily wavelength-dependent close to the absorption edges of the respective element. This is utilized for contrast enhancement. Usage of multiple wavelengths above, below and between the absorption edges of Cu and Zn ensures significant overdetermination, so that the Cu-, Zn-, and vacancy concentrations can be refined reliably for the independent crystallographic sites. Experiments were conducted at the diffraction end station of the KMC-2 beamline [2] at BESSY (Berlin, Germany). KMC-2 provides X-ray radiation with both very stable energies and intensities. The accessible energy range of 4 – 14 keV is ideally suited for the K-edges of Cu (8979 eV) and Zn (9659 eV). A 6-circle goniometer in psi-geometry allows both powder and grazing incidence diffraction, so that bulk samples and thin films can be measured. The instrument can be equipped with either a scintillation point detector (Cyberstar) or an area detector (Bruker Vantec), allowing to optimize resolution and intensity to the needs of the experiment.


Sign in / Sign up

Export Citation Format

Share Document