TPTPC and BHC integrated grid connected energy storage system for power loss reduction

Circuit World ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Suresh Krishnan ◽  
Pothuraju Pandi ◽  
Subbarao Mopidevi
Keyword(s):  
Energy Storage ◽  
Power Loss ◽  
Single Stage ◽  
Storage Device ◽  
Content Type ◽  
Positive Group ◽  
Stage Conversion ◽  
Three Phase ◽  
Wide Range ◽  
Power Loss Reduction

Purpose This paper aims to propose a bidirectional hidden converter (BHC)-based three-phase DC–AC conversion for energy storage application. BHC is the new concept to vary an energy storage device voltage into wide range. Hidden converter power loss and power rating are reduced by using zero-sequence injection-based carrier-based pulse-width modulation (CBPWM) strategy. Design/methodology/approach By using this control strategy, a BHC processes only little amount of power during double-stage conversion, mostly during direct or single-stage conversion of the three-phase three-port converter (TPTPC) only processing the maximum power. Findings TPTPC consists of two sets of positive group switches for inversion process, one set of switches is regular inverter switches called vertical positive group switches, and the second set is anti-series switches, which are horizontally connected for direct or single-stage conversion. Originality/value Characteristics, principles and implementations of proposed DC–AC 3Ø conversion system and its PWM strategy are analyzed. Through experimental outputs, the effectiveness and viability of the proposed solutions are validated.

Effective design and development of hybrid ABC-CSO-based capacitor placement with load forecasting based on artificial neural network

2019 ◽  
Vol 39 (5) ◽  
pp. 917-930 ◽  
Author(s):  
Sarika Sharma ◽  
Smarajit Ghosh
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Radial Distribution ◽  
Power Loss ◽  
Distribution Network ◽  
Load Forecasting ◽  
Distribution Networks ◽  
Content Type ◽  
Power Loss Reduction ◽  
Artificial Neural

Purpose This paper aims to develop a capacitor position in radial distribution networks with a specific end goal to enhance the voltage profile, diminish the genuine power misfortune and accomplish temperate sparing. The issue of the capacitor situation in electric appropriation systems incorporates augmenting vitality and peak power loss by technique for capacitor establishments. Design/methodology/approach This paper proposes a novel strategy using rough thinking to pick reasonable applicant hubs in a dissemination structure for capacitor situation. Voltages and power loss reduction indices of distribution networks hubs are shown by fuzzy enrollment capacities. Findings A fuzzy expert system containing a course of action of heuristic rules is then used to ascertain the capacitor position appropriateness of each hub in the circulation structure. The sizing of capacitor is solved by using hybrid artificial bee colony–cuckoo search optimization. Practical implications Finally, a short-term load forecasting based on artificial neural network is evaluated for predicting the size of the capacitor for future loads. The proposed capacitor allocation is implemented on 69-node radial distribution network as well as 34-node radial distribution network and the results are evaluated. Originality/value Simulation results show that the proposed method has reduced the overall losses of the system compared with existing approaches.

A new three-phase multilevel DC-link inverter topology with reduced switch count for photovoltaic applications

Circuit World ◽  
2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Anbarasan P. ◽  
Krishnakumar V. ◽  
Ramkumar S. ◽  
Venkatesan S.
Keyword(s):  
Power Loss ◽  
Output Voltage ◽  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Photovoltaic Cell ◽  
Content Type ◽  
Energy Applications ◽  
Three Phase ◽  
Photovoltaic Applications ◽  
Inverter Topology

Purpose This paper aims to propose a new MLI topology with reduced number of switches for photovoltaic applications. Multilevel inverters (MLIs) have been found to be prospective for renewable energy applications like photovoltaic cell, as they produce output voltage from numerous separate DC sources or capacitor banks with reduced total harmonic distortion (THD) because of a staircase like waveform. However, they endure from serious setbacks including larger number of capacitors, isolated DC sources, associated gate drivers and increased control difficulty for higher number of voltage levels. Design/methodology/approach This paper proposes a new three-phase multilevel DC-link inverter topology overpowering the previously mentioned problems. The proposed topology is designed for five and seven levels in Matlab/Simulink with gating pulse using multicarrier pulse width modulation. The hardware results are shown for a five-level MLI to witness the viability of the proposed MLI for medium voltage applications. Findings The comparison of the proposed topology with other conventional and other topologies in terms of switch count, DC sources and power loss has been made in this paper. The reduction of switches in proposed topology results in reduced power loss. The simulation and hardware show that the output voltage yields a very close sinusoidal voltage and lesser THD. Originality/value The proposed topology can be extended for any level of output voltage which is helpful for sustainable source application.

scholarly journals Direct X-Ray Imaging as a Tool for Understanding Multiphysics Phenomena in Energy Storage

2016 ◽  
Vol 13 (3) ◽  
Author(s):  
George J. Nelson ◽  
Zachary K. van Zandt ◽  
Piyush D. Jibhakate
Keyword(s):  
Energy Storage ◽  
Lithium Ion ◽  
Ex Situ ◽  
Storage Device ◽  
Li Ion Batteries ◽  
X Ray ◽  
X Ray Imaging ◽  
Wide Range ◽  
Li Ion ◽  
Insight Into

The lithium-ion battery (LIB) has emerged as a key energy storage device for a wide range of applications, from consumer electronics to transportation. While LIBs have made key advancements in these areas, limitations remain for Li-ion batteries with respect to affordability, performance, and reliability. These challenges have encouraged the exploration for more advanced materials and novel chemistries to mitigate these limitations. The continued development of Li-ion and other advanced batteries is an inherently multiscale problem that couples electrochemistry, transport phenomena, mechanics, microstructural morphology, and device architecture. Observing the internal structure of batteries, both ex situ and during operation, provides a critical capability for further advancement of energy storage technology. X-ray imaging has been implemented to provide further insight into the mechanisms governing Li-ion batteries through several 2D and 3D techniques. Ex situ imaging has yielded microstructural data from both anode and cathode materials, providing insight into mesoscale structure and composition. Furthermore, since X-ray imaging is a nondestructive process studies have been conducted in situ and in operando to observe the mechanisms of operation as they occur. Data obtained with these methods has also been integrated into multiphysics models to predict and analyze electrode behavior. The following paper provides a brief review of X-ray imaging work related to Li-ion batteries and the opportunities these methods provide for the direct observation and analysis of the multiphysics behavior of battery materials.

Integrated DC-AC and AC-DC converter using H-converter for wide range voltage applications

Circuit World ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Saravanan R. ◽  
Vijayshankar S. ◽  
Sathyaseelan Sathyaseelan ◽  
Suresh K.
Keyword(s):  
Pulse Width ◽  
Power Loss ◽  
Pulse Width Modulation ◽  
Modulation Scheme ◽  
Power Losses ◽  
Content Type ◽  
One Stage ◽  
Energy Storage Application ◽  
Wide Range ◽  
Zero Sequence

Purpose This paper aims to propose Hidden Converter (H-Converter) combined with dual port 3Ø inverter for energy storage application to produce wide range of voltage. Some of the application required wide range of voltages, but problem from E-chopper is either boost or buck mode of operations, both modes are not possible. To overcome this drawback, H-Converter is combined with dual port 3Ø inverter controlled by carrier-based pulse width modulation (CB-PWM) technique is added with zero sequence injection. Design/methodology/approach Hidden converter is a bidirectional DC-DC chopper used to convert fixed DC to variable DC and vice versa in both buck and boost modes of operations. Dual port inverter is combined with hidden DC-DC converter can produce wide range of voltages. Findings The bidirectional DC-AC converter requires less power for processing and consumes less power losses by using modest carrier built- pulse width modulation scheme through proposed zero structure addition. Originality/value By using this proposed strategy H-Converter can produce wide range of voltage in both the sides and mostly power is processed in the 3Ø inverter with a one stage conversion with less power loss. As a result, with one stage power conversion has more efficiency because of less power loss. This proposed converter has designed by analysis, and the real time result is tested in an experiment.

Towards a transformer transient model as a lumped-distributed parameter system

2017 ◽  
Vol 36 (3) ◽  
pp. 741-750 ◽  
Author(s):  
Sergey E. Zirka ◽  
Yuriy I. Moroz ◽  
Ebrahim Rahimpour
Keyword(s):  
Power Transformer ◽  
Low Frequency ◽  
Fortran Program ◽  
Transient Model ◽  
Content Type ◽  
Voltage Range ◽  
Three Phase ◽  
Wide Range ◽  
Loss Prediction ◽  
Zero Sequence

Purpose The purpose of this study is to develop a topological model of a three-phase, three-limb transformer for low-frequency transients. The processes in the core limbs and yokes are reproduced individually by means of a dynamic hysteresis model (DHM). A method of accounting for the transformer tank with vertical magnetic shunts at the tank walls is proposed and tested on a 120 MVA power transformer. Design/methodology/approach The model proposed has been implemented independently in a dedicated Fortran program and in the graphical pre-processor ATPDraw to the ATP version of the electromagnetic transient program. Findings It was found that the loss prediction in a wide range of terminal voltages can only be achieved using a DHM with variable excess field component. The zero sequence properties of the transformer can be accurately reproduced by a duality-derived model with Cauer circuits representing tank wall sections (belts). Research limitations/implications In its present form, the model proposed is suitable for low-frequency studies. Its usage in the case when transformer capacitances are involved should be studied additionally. Practical/implications The presented model can be used either as an independent tool or serve as a reference for subsequent simplifications. Social/implications The model proposed is aimed at meeting the needs of electrical engineering and ecology-minded customers. Originality/value Till date, there were no experimental data on zero-sequence behavior of three-phase, three-limb transformer with vertical magnetic shunts, so no verified transient model existed. The model proposed is probably the first that matched this behavior and reproduced measured no-load losses for a wide voltage range.

New advanced concept of the flying capacitor asymmetric multilevel voltage source inverter

2018 ◽  
Vol 37 (3) ◽  
pp. 1166-1188
Author(s):  
Henda Jabberi ◽  
Faouzi Ben Ammar
Keyword(s):  
Energy Storage ◽  
Output Voltage ◽  
Voltage Source ◽  
Power Devices ◽  
Capacitive Energy Storage ◽  
Content Type ◽  
Three Phase ◽  
Capacitor Voltage ◽  
Asymmetrical Design ◽  
Harmonic Distortions

Purpose To improve the voltage quality in AC adjustable high-power-speed-drive applications, the purpose of the paper is to provide a large number of output levels without increasing the number of commutation cells in the three-phase, n-cells flying capacitor voltage source asymmetric Multilevel Inverter (MI). The concept is based on the selection of different ratios between the breakdown voltages of two successive power devices. The new mathematical model is developed under various ratios, allows a thorough investigation of the harmonic distortions, flying capacitor energy storage, flying capacitor voltage balancing controllability and blocking voltage insulated gate bipolar transistor (IGBT) capability. Design/methodology/approach The asymmetrical design provides a large number of output levels without increasing the number of commutation cells. The important new analytical expression of capacitors voltage distribution is derived and extended to any ratio between the switch breakdown voltages of two successive power devices. Findings The detailed simulation study of the proposed concept has been carried out using MATLAB/Simulink. The power switches control of the three-phase three-cell MI is assured by new phase-shifted-multi-carrier pulse width modulation. The space vector representation is used to show the regular and irregular step output voltage in the complex plan (α,β). Originality/value In the paper, the n cells flying capacitor inverter, which typically operates in the (n + 1) levels mode, was extended to (n + 2), (n + 3) … until 2n levels with regular or irregular step output voltage. Consequently, the claimed advantages of the asymmetric MI are to improve power quality by reducing harmonic distortions and to reduce the requirement on capacitive energy storage in the circuit.

Sign in / Sign up

Export Citation Format

Share Document