ISPH method for MHD double-diffusive natural convection of a nanofluid within cavity containing open pipes

2019 ◽  
Vol 30 (7) ◽  
pp. 3607-3634 ◽  
Author(s):  
Zehba A.S. Raizah ◽  
Abdelraheem M. Aly

Purpose This paper aims to adopt incompressible smoothed particle hydrodynamics (ISPH) method for studying magnetohydrodynamic (MHD) double-diffusive natural convection from an inner open pipe in a cavity filled with a nanofluid. Design/methodology/approach The Lagrangian description of the governing equations was solved using the current ISPH method. The effects of two pipe shapes as a straight pipe and V-pipe, length of the pipe LPipe (0.2-0.8), length of V-pipe LV (0.04-0.32), Hartmann parameter Ha (40-120), solid volume fraction ϕ (0-0.1) and Lewis number Le (1-50) on the heat and mass transfer of nanofluid have been investigated. Findings The results demonstrate that the average Nusselt and Sherwood numbers are increased by increment on the straight-pipe length, V-pipe length, Hartmann parameter, solid volume fraction and Lewis number. In addition, the variation on the open pipe shapes gives a suitable choice for enhancement heat and mass transfer inside the cavity. The control parameters of the open pipes can enhance the heat and mass transfer inside a cavity. In addition, the variation on the open pipe shapes gives a suitable choice for enhancement heat and mass transfer inside the cavity. Originality/value ISPH method is developed to study the MHD double-diffusive natural convection from the novel shapes of the inner heated open pipes inside a cavity including straight-pipe and V-pipe shapes.

Author(s):  
Alireza Rahimi ◽  
Aravindhan Surendar ◽  
Aygul Z. Ibatova ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah

Purpose This paper aims to investigate the three-dimensional natural convection and entropy generation in the rectangular cuboid cavities included by chamfered triangular partition made by polypropylene. Design/methodology/approach The enclosure is filled by multi-walled carbon nanotubes (MWCNTs)-H2O nanofluid and air as two immiscible fluids. The finite volume approach is used for computation. The fluid flow and heat transfer are considered with combination of local entropy generation due to fluid friction and heat transfer. Moreover, a numerical method is developed based on three-dimensional solution of Navier–Stokes equations. Findings Effects of side ratio of triangular partitions (SR = 0.5, 1 and 2), Rayleigh number (103 < Ra < 105) and solid volume fraction (f = 0.002, 0.004 and 0.01 Vol.%) of nanofluid are investigated on both natural convection characteristic and volumetric entropy generation. The results show that the partitions can be a suitable method to control fluid flow and energy consumption, and three-dimensional solutions renders more accurate results. Originality/value The originality of this work is to study the three-dimensional natural convection and entropy generation of a stratified system.


2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Soraya Torkaman ◽  
Ghasem Barid Loghmani ◽  
Mohammad Heydari ◽  
Abdul-Majid Wazwaz

Purpose The purpose of this paper is to investigate a three-dimensional boundary layer flow with considering heat and mass transfer on a nonlinearly stretching sheet by using a novel operational-matrix-based method. Design/methodology/approach The partial differential equations that governing the problem are converted into the system of nonlinear ordinary differential equations (ODEs) with considering suitable similarity transformations. A direct numerical method based on the operational matrices of integration and product for the linear barycentric rational basic functions is used to solve the nonlinear system of ODEs. Findings Graphical and tabular results are provided to illustrate the effect of various parameters involved in the problem on the velocity profiles, temperature distribution, nanoparticle volume fraction, Nusselt and Sherwood number and skin friction coefficient. Comparison between the obtained results, numerical results based on the Maple's dsolve (type = numeric) command and previous existing results affirms the efficiency and accuracy of the proposed method. Originality/value The motivation of the present study is to provide an effective computational method based on the operational matrices of the barycentric cardinal functions for solving the problem of three-dimensional nanofluid flow with heat and mass transfer. The convergence analysis of the presented scheme is discussed. The benefit of the proposed method (PM) is that, without using any collocation points, the governing equations are converted to the system of algebraic equations.


2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Patakota Sudarsana Reddy ◽  
Paluru Sreedevi ◽  
Kavaturi Venkata Suryanarayana Rao

Purpose The purpose of this paper is to know the influence of heat generation/absorption and slip effects on heat and mass transfer flow of carbon nanotubes – water-based nanofluid over a rotating disk. Two types of carbon nanotubes, single and multi-walled, are considered in this analysis. Design/methodology/approach The non-dimensional system of governing equations is constructed using compatible transformations. These equations together with boundary conditions are solved numerically by using the most prominent Finite element method. The influence of various pertinent parameters such as magnetic parameter (0.4 – 1.0), nanoparticle volume fraction parameter (0.1 – 0.6), porosity parameter (0.3 – 0.6), radiation parameter (0.1 – 0.4), Prandtl number (2.2 – 11.2), space-dependent (−3.0 – 3.0), temperature-dependent (−3.0 – 1.5), velocity slip parameter (0.1 – 1.0), thermal slip parameter (0.1 – 0.4) and chemical reaction parameter (0.3 – 0.6) on nanofluids velocity, temperature and concentration distributions, as well as rates of velocity, temperature and concentration is calculated and the results are plotted through graphs and tables. Also, a comparative analysis is carried out to verify the validation of the present numerical code and found good agreement. Findings The results indicate that the temperature of the fluid elevates with rising values of nanoparticle volume fraction parameter. Furthermore, the rates of heat transfer rise from 4.8% to 14.6% when carbon nanotubes of 0.05 volume fraction are suspended into the base fluid. Originality/value The work carried out in this analysis is original and no part is copied from other sources.


2016 ◽  
Vol 26 (5) ◽  
pp. 1346-1364 ◽  
Author(s):  
Chahinez Ghernoug ◽  
Mahfoud Djezzar ◽  
Hassane Naji ◽  
Abdelkarim Bouras

Purpose – The purpose of this paper is to numerically study the double-diffusive natural convection within an eccentric horizontal cylindrical annulus filled with a Newtonian fluid. The annulus walls are maintained at uniform temperatures and concentrations so as to induce aiding thermal and mass buoyancy forces within the fluid. For that, this simulation span a moderate range of thermal Rayleigh number (100RaT100,000), Lewis (0.1Le10), buoyancy ratio (0N5) and Prandtl number (Pr=0.71) to examine their effects on flow motion and heat and mass transfers. Design/methodology/approach – A finite volume method in conjunction with the successive under-relaxation algorithm has been developed to solve the bipolar equations. These are written in dimensionless form in terms of vorticity, stream function, temperature and concentration. Beforehand, the implemented computer code has been validated through already published findings in the literature. The isotherms, streamlines and iso-concentrations are exhibited for various values of Rayleigh and Lewis numbers, and buoyancy ratio. In addition, heat and mass transfer rates in the annulus are translated in terms of Nusslet and Sherwood numbers along the enclosure’s sides. Findings – It is observed that, for the range of parameters considered here, the results show that the average Sherwood number increases with, while the average Nusselt number slightly dips as the Lewis number increases. It is also found that, under the convective mode, the local Nusselt number (or Sherwood) increases with the buoyancy ratio. Likewise, according to Lewis number’s value, the flow pattern is either symmetric and stable or asymmetric and random. Besides that, the heat transfer is transiting from a conductive mode to a convective mode with increasing the thermal Rayleigh number, and the flow structure and the rates of heat and mass transfer are significantly influenced by this parameter. Research limitations/implications – The range of the Rayleigh number considered here covers only the laminar case, with some constant parameters, namely the Prandtl number (Pr = 0.71), and the tilt angle (α=90°). The analysis here is only valid for steady, two-dimensional, laminar and aiding flow within an eccentric horizontal cylindrical annulus. This motivates further investigations involving other relevant parameters as N (opposite flows), Ra, Pr, Le, the eccentricity, the tilt angle, etc. Practical implications – An original framework for handling the double-diffusive natural convection within annuli is available, based on the bipolar equations. In addition, the achievement of this work could help researchers design thermal systems supported by annulus passages. Applications of the results can be of value in various arrangements such as storage of liquefied gases, electronic cable cooling systems, nuclear reactors, underground disposal of nuclear wastes, manifolds of solar energy collectors, etc. Originality/value – Given the geometry concerned, the bipolar coordinates have been used to set the inner and outer walls boundary conditions properly without interpolation. In addition, since studies on double-diffusive natural convection in annuli are lacking, the obtained results may be of interest to handle other configurations (e.g., elliptical-shaped speakers) with other boundary conditions.


2019 ◽  
Vol 30 (5) ◽  
pp. 2625-2637 ◽  
Author(s):  
Hanieh Nazarafkan ◽  
Babak Mehmandoust ◽  
Davood Toghraie ◽  
Arash Karimipour

Purpose This study aims to apply the lattice Boltzmann method to investigate the natural convection flows utilizing nanofluids in a semicircular cavity. The fluid in the cavity is a water-based nanofluid containing Al2O3 or Cu nanoparticles. Design/methodology/approach The study has been carried out for the Rayleigh numbers from 104 to 106 and the solid volume fraction from 0 to 0.05. The effective thermal conductivity and viscosity of nanofluid are calculated by the models of Chon and Brinkman, respectively. The effects of solid volume fraction on hydrodynamic and thermal characteristics are investigated and discussed. The averaged and local Nusselt numbers, streamlines, temperature contours for different values of solid volume fraction and Rayleigh number are illustrated. Findings The results indicate that more solid volume fraction corresponds to more averaged Nusselt number for both types of nanofluids. It is also found that the effects of solid volume fraction of Cu are stronger than those of Al2O3. Originality/value Numerical study of natural convection of nanofluid in a semi-circular cavity with lattice Boltzmann method in the presence of water-based nanofluid containing Al2O3 or Cu nanoparticles.


2015 ◽  
Vol 137 (8) ◽  
Author(s):  
Waqar A. Khan ◽  
Richard Culham ◽  
A. Aziz

A model based on the works of Buongiorno, which includes the effects of Brownian motion and thermophoresis, is used to develop the governing equations for convection in nanofluids. The analysis includes examples with water and ethylene glycol as the base fluids and nanoparticles of Cu and Al2O3. An assumption of zero nanoparticle flux is used at the surface of the plate to make the model more physically realistic. The model accounts for the effects of both Brownian motion and thermophoresis in the mass boundary condition. Using suitable transformations, the governing partial differential equations are converted into ordinary differential equations which are solved numerically. The dimensionless velocity, temperature, and concentration gradients are used in the second law analysis to determine heat and mass transfer rates. It is shown that the dimensionless entropy generation rate strongly depends upon the solid volume fraction of the nanoparticles, local Reynolds number, and group parameters.


Sign in / Sign up

Export Citation Format

Share Document