Fluid flow and heat transfer of a stratified system during natural convection – influence of chamfered corners

2019 ◽  
Vol 29 (2) ◽  
pp. 470-486 ◽  
Author(s):  
Alireza Rahimi ◽  
Aravindhan Surendar ◽  
Aygul Z. Ibatova ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Three Dimensional ◽  
Immiscible Fluids ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This paper aims to investigate the three-dimensional natural convection and entropy generation in the rectangular cuboid cavities included by chamfered triangular partition made by polypropylene. Design/methodology/approach The enclosure is filled by multi-walled carbon nanotubes (MWCNTs)-H2O nanofluid and air as two immiscible fluids. The finite volume approach is used for computation. The fluid flow and heat transfer are considered with combination of local entropy generation due to fluid friction and heat transfer. Moreover, a numerical method is developed based on three-dimensional solution of Navier–Stokes equations. Findings Effects of side ratio of triangular partitions (SR = 0.5, 1 and 2), Rayleigh number (103 < Ra < 105) and solid volume fraction (f = 0.002, 0.004 and 0.01 Vol.%) of nanofluid are investigated on both natural convection characteristic and volumetric entropy generation. The results show that the partitions can be a suitable method to control fluid flow and energy consumption, and three-dimensional solutions renders more accurate results. Originality/value The originality of this work is to study the three-dimensional natural convection and entropy generation of a stratified system.

Numerical investigation of conjugate heat transfer and entropy generation of MHD natural convection of nanofluid in an inclined enclosure

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Amin Kardgar
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Entropy Generation ◽  
Wall Thickness ◽  
Conjugate Heat Transfer ◽  
Volume Fraction ◽  
Content Type ◽  
Inclined Enclosure

Purpose The purpose of this paper is to investigate conjugate heat transfer of natural convection and entropy generation of nanofluid in the presence of external magnetic field via numerical approach in an inclined square cavity enclosure. Design/methodology/approach Control volume finite volume method with collocated arrangement of grids was used for discretization of continuity, momentum, solid and fluid energy equations. Rhie and Chow interpolation technique was applied to avoid checkerboard problem in pressure field and the well-established SIMPLE algorithm was followed to deal with the pressure and velocity coupling. The cavity is filled with water and nanoparticles of the aluminum oxide (Al2O3). This study has been conducted for the certain pertinent parameters of the volume fraction of nanoparticle (φ = 0–0.08), the angle of inclination (ϴ = 0°–330°), the Ra number (Ra = 103–108), the solid to fluid conductivity ratio (ksf = 1–400), the Ha number (Ha = 0–80) and the wall thickness ratio (δ/L = 0–0.3). Findings The results indicate that averaged Nu number increases by approximately 9% by increasing volume fraction from 0.0 to 0.08. Nu increases with an increasing inclination angle to 40° and decreases abruptly in 90° because of the formation of two weaker vorticity with opposite circulation pattern intensifying the density of isotherm curves in a vertical direction. Nu increases sharply with increasing Ra more than 105. Nu also augments almost 67% by increasing ksf = 1 to ksf = 50 and remains constant by increasing ksf more than 50. Nu number reduction is almost 72% with a variation of wall thickness ratio from d/L = 0 to 0.3. Entropy generation because of fluid flow, magnetic field and heat transfer reduces linearly almost 30%, 19% and 16% by increasing volume fraction, respectively. With increasing ksf, entropy generation because of fluid flow, magnetic field and heat transfer increases asymptotically, but Bejan number decreases. Originality/value A brief review of conducted research studies in nanofluid flow and heat transfer reveals that the effect of wall thermal inertia was not investigated in MHD natural convection of nanofluids in an inclined enclosure. The aim of the present study is to analyze conjugate heat transfer in an inclined cavity filled with water and Al2O3.

Lattice Boltzmann simulation of 3D natural convection in a cuboid filled with KKL-model predicted nanofluid using Dual-MRT model

2019 ◽  
Vol 29 (1) ◽  
pp. 365-387 ◽  
Author(s):  
Alireza Rahimi ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah ◽  
Mohammad Mehdi Rashidi ◽  
Abimanyu Purusothaman
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Lattice Boltzmann Method ◽  
Entropy Generation ◽  
Lattice Boltzmann ◽  
Three Dimensional ◽  
Local Heat Transfer ◽  
Content Type ◽  
Boltzmann Method

Purpose This study aims to investigate the three-dimensional natural convection and entropy generation in a cuboid enclosure filled with CuO-water nanofluid. Design/methodology/approach The lattice Boltzmann method is used to solve the problem numerically. Two different multiple relaxation time (MRT) models are used to solve the problem. The D3Q7–MRT model is used to solve the temperature field, and the D3Q19 is used to solve the fluid flow of natural convection within the enclosure. Findings The influences of different Rayleigh numbers (103 < Ra < 106) and solid volume fractions (0 < f < 0.04) on the fluid flow, heat transfer, total entropy generation, local heat transfer irreversibility and local fluid friction irreversibility are presented comprehensively. To predict thermo–physical properties, dynamic viscosity and thermal conductivity, of CuO–water nanofluid, the Koo–Kleinstreuer–Li (KKL) model is applied to consider the effect of Brownian motion on nanofluid properties. Originality/value The originality of this work is to analyze the three-dimensional natural convection and entropy generation using a new numerical approach of dual-MRT-based lattice Boltzmann method.

Hydrothermal investigation of a stratified system in enclosure with jagged surface for application in lead-acid batteries

2019 ◽  
Vol 15 (1) ◽  
pp. 283-303 ◽  
Author(s):  
Mahmoud Salari ◽  
Emad Hasani Malekshah ◽  
Mohammad Reza Sarlak ◽  
Masoud Hasani Malekshah ◽  
Mohammad Pilfoush
Keyword(s):  
Nusselt Number ◽  
Fluid Flow ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Content Type ◽  
Lead Acid Batteries ◽  
Lead Acid

Purpose The purpose of this paper is to investigate the three-dimensional natural convection and entropy generation in a cuboid enclosure filled with two immiscible fluids of nanofluid and air. Design/methodology/approach One surface of the enclosure is jagged and another one is smooth. The finite volume approach is applied for computation. There are two partially side heaters. Furthermore, the Navier–Stokes equations and entropy generation formulation are solved in the 3D form. Findings The effects of different governing parameters, such as the jagged surface (JR=0, 0.02, 0.04, 0.08, 0.12 and 0.16), Rayleigh number (103⩽Ra⩽106) and solid volume fraction of nanofluid (φ=1, 1.5, 2 vol%), on the fluid flow, temperature field, Nusselt number, volumetric entropy generation and Bejan number are presented, comprehensively. The results indicate that the average Nusselt number increases with the increase in the Rayleigh number and solid volume fraction of nanofluid. Moreover, the flow structure is significantly affected by the jagged surface. Originality/value The originality of this work is to analyze the natural-convection fluid flow and heat transfer under the influence of jagged surfaces of electrodes in high-current lead–acid batteries.

Lattice Boltzmann simulation of free convection in nanofluid filled cavity with partially active walls – entropy generation and heatline visualization

2018 ◽  
Vol 28 (10) ◽  
pp. 2254-2283 ◽  
Author(s):  
Alireza Rahimi ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah ◽  
Lioua Kolsi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Entropy Generation ◽  
Lattice Boltzmann ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Content Type ◽  
Lattice Boltzmann Simulation

Purpose This paper aims to perform the lattice Boltzmann simulation of natural convection heat transfer in cavities included with active hot and cold walls at the side walls and internal hot and cold obstacles. Design/methodology/approach The cavity is filled with double wall carbon nanotubes (DWCNTs)-water nanofluid. Different approaches such as local and total entropy generation, local and average Nusselt number and heatline visualization are used to analyze the natural convection heat transfer. The cavity is filled with DWCNTs-water nanofluid and the thermal conductivity and dynamic viscosity are measured experimentally at different solid volume fractions of 0.01 per cent, 0.02 per cent, 0.05 per cent, 0.1 per cent, 0.2 per cent and 0.5 per cent and at a temperature range of 300 to 340 (K). Findings Two sets of correlations for these parameters based on temperature and solid volume fraction are developed and used in the numerical simulations. The influences of different governing parameters such as Rayleigh number, solid volume fraction and different arrangements of active walls on the fluid flow, heat transfer and entropy generation are presented, comprehensively. It is found that the different arrangements of active walls have pronounced influence on the flow structure and heat transfer performance. Furthermore, the Nusselt number has direct relationship with Rayleigh number and solid volume fraction. On the other hand, the total entropy generation has direct and reverse relationship with Rayleigh number and solid volume fraction, respectively. Originality/value The originality of this work is to analyze the two-dimensional natural convection using lattice Boltzmann method and different approaches such as entropy generation and heatline visualization.

Study on fluid flow and heat transfer in fluid channel filled with KKL model-based nanofluid during natural convection using FVM

2019 ◽  
Vol 29 (8) ◽  
pp. 2622-2641
Author(s):  
Yongsheng Rao ◽  
Zehui Shao ◽  
Alireza Rahimi ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Entropy Generation ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Temperature Fields ◽  
Bejan Number ◽  
Content Type ◽  
Flow And Heat Transfer

PurposeA comprehensive study on the fluid flow and heat transfer in a nanofluid channel is carried out. The configuration of the channel is as like as quarter channel. The channel is filled with CuO–water nanofluid.Design/methodology/approachThe Koo–Kleinstreuer–Li model is used to estimate the dynamic viscosity and consider the Brownian motion. On the other hand, the influence of nanoparticles’ shapes on the heat transfer rate is considered in the simulations. The channel is included with the injection pipes which are modeled as active bodies with constant temperature in the 2D simulations.FindingsThe Rayleigh number, nanoparticle concentration and the thermal arrangements of internal pipes are the governing parameters. The hydrothermal aspects of natural convection are investigation using different approaches such as average Nusselt number, total entropy generation, Bejan number, streamlines, temperature fields, local heat transfer irreversibility, local fluid friction irreversibility and heatlines.Originality/valueThe originality of this work is investigation of fluid flow, heat transfer, entropy generation and heatline visualization within a nanofluid-filled channel using a finite volume method.

Thermophoresis and Brownian effects on natural convection of nanofluids in a square enclosure with two pairs of heat source/sink

2015 ◽  
Vol 25 (5) ◽  
pp. 1030-1046 ◽  
Author(s):  
Aminreza Noghrehabadi ◽  
Amin Samimi Behbahan ◽  
I. Pop
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Heat Source ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Numerical Results ◽  
Content Type ◽  
Source Sink

Purpose – The purpose of this paper is to study natural convection heat transfer and fluid flow in a square cavity filled with CuO-water nanofluid. Design/methodology/approach – The entire length of the bottom wall of the cavity is covered by two pairs of heat source-sink, whereas the other walls are insulated. The governing equations of fluid flow are discretized using a finite volume method with a collocated grid arrangement. The coupling between velocity and pressure is solved using the SIMPLEC and the Rhie and Chow interpolation is used to avoid the checker-board solutions for the pressure. Findings – The numerical results are reported for the effect of Rayleigh number, solid volume fraction and both presence and absence of thermophoresis and Brownian motion effects. The numerical results show an improvement in heat transfer rate for the whole range of Rayleigh numbers when Brownian and thermophoresis effects are considered. Furthermore, an increase in the Rayleigh number and nanoparticle volume fraction in both cases – when Brownian and thermophoresis effects are neglected or considered – has an excellent influence on heat transfer of nanofluids. Originality/value – The area of nanofluids is very original.

scholarly journals Numerical Simulation of the Natural Convection with Presence of the Nanofluids in Cubical Cavity

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Mohamed Sannad ◽  
Abourida Btissam ◽  
Belarche Lahoucine
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Numerical Study ◽  
Three Dimensional ◽  
Convection Heat Transfer ◽  
Flow And Heat Transfer ◽  
Heating Section ◽  
The Right

This article consists of a numerical study of natural convection heat transfer in three-dimensional cavity filled with nanofluids. This configuration is heated by a partition maintained at a hot constant and uniform temperature TH. The right and left vertical walls are kept at a cold temperature TC while the rest is adiabatic. The fluid flow and heat transfer in the cavity are studied for different sets of the governing parameters, namely, the nanofluid type, the Rayleigh number Ra = 103, 104, 105, and 106, and the volume fraction Ф varying between Ф = 0 and 0.1. The obtained results show a positive effect of the volume fraction and the Rayleigh number on the heat transfer improvement. The analysis of the results related to the heat transfer shows that the copper-based nanofluid guarantees the best thermal transfer. In addition, the increase of the heating section size and Ra leads to an increased amount of heat. Similarly, increasing the volume fraction improves the intensification of the flow and increases the heat exchange.

Heat transfer and entropy generation analysis of Cu-water nanofluid in a vertical channel

2018 ◽  
Vol 15 (5) ◽  
pp. 604-613
Author(s):  
Essma Belahmadi ◽  
Rachid Bessaih
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Mixed Convection ◽  
Friction Factor ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Vertical Channel ◽  
Simple Algorithm ◽  
Content Type

Purpose The purpose of this study is to analyze heat transfer and entropy generation of a Cu-water nanofluid in a vertical channel. The channel walls are maintained at a hot temperature Tw. An up flow penetrates the channel at a uniform velocity v0 and a cold temperature T0 (T0 < Tw). The effects of Reynolds number Re, Grashof number Gr and solid volume fraction ϕ on streamlines, isotherms, entropy generation, friction factor, local and mean Nusselt numbers are evaluated. Design/methodology/approach The Cu-water nanofluid is used in this study. The software Ansys-fluent 14.5, based on the finite-volume method and SIMPLE algorithm, is used to simulate the mixed convection problem with entropy generation in a vertical channel. Findings The results show that the increase of Reynolds and Grashof numbers and solid volume fraction improves heat transfer and reduces entropy generation. Correlations for the mean Nusselt number and friction factor in terms of Reynolds number and solid volume fraction are obtained. The present results are compared with those found in the literature, which reveal a very good agreement. Originality/value The originality of this work is to understand the heat transfer and entropy generation for mixed convection of a Cu-water nanofluid in a vertical channel.

Mixed convection boundary layer flow along vertical thin needles in nanofluids

2014 ◽  
Vol 24 (3) ◽  
pp. 579-594 ◽  
Author(s):  
Radu Trimbitas ◽  
Teodor Grosan ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Boundary Layer ◽  
Heat Transfer Characteristics ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Convection Boundary ◽  
Layer Flow

Purpose – The purpose of this paper is to theoretically study the problem of mixed convection boundary layer flow and heat transfer past a vertical needle with variable wall temperature using nanofluids. The similarity equations are solved numerically for copper nanoparticles in the based fluid of water to investigate the effect of the solid volume fraction parameter of the fluid and heat transfer characteristics. The skin friction coefficient, Nusselt number, and the velocity and temperature profiles and are graphically presented and discussed. Design/methodology/approach – The transformed system of ordinary differential equations was solved using the function bvp4c from Matlab. The relative tolerance was set to 1e-10. For the study of the stability the authors also used the bvp4c function in combination with chebfun package from Matlab. Findings – It is found that the solid volume fraction affects the fluid flow and heat transfer characteristics. The numerical results for a regular fluid and forced convection flow are compared with the corresponding results reported by Chen and Smith. The solutions exists up to a critical value of λ, beyond which the boundary layer separates from the surface and the solution based upon the boundary-layer approximations is not possible Originality/value – The paper describes how multiple (dual) solutions for the flow reversals are obtained. A stability analysis for this flow reversal has been also done showing that the lower solution branches are unstable, while the upper solution branches are stable.

Performance of combined spectral collocation method and artificial compressibility method for 3D incompressible fluid flow and heat transfer

2020 ◽  
Vol 30 (12) ◽  
pp. 5037-5062
Author(s):  
Jing-Kui Zhang ◽  
Miao Cui ◽  
Ben-Wen Li ◽  
Ya-Song Sun
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Incompressible Flow ◽  
Three Dimensional ◽  
Function Form ◽  
Combined Method ◽  
Time Step ◽  
Content Type ◽  
Artificial Compressibility ◽  
Flow And Heat Transfer

Purpose The purpose of this paper is to develop a combined method for three-dimensional incompressible flow and heat transfer by the spectral collocation method (SCM) and the artificial compressibility method (ACM), and further to study the performance of the combined method SCM-ACM for three-dimensional incompressible flow and heat transfer. Design/methodology/approach The partial differentials in space are discretized by the SCM with Chebyshev polynomial and Chebyshev–Gauss–Lobbatto collocation points. The unsteady artificial compressibility equations are solved to obtain the steady results by the ACM. Three-dimensional exact solutions with trigonometric function form and exponential function form are constructed to test the accuracy of the combined method. Findings The SCM-ACM is developed successfully for three-dimensional incompressible flow and heat transfer with high accuracy that the minimum value of variance can reach. The accuracy increases exponentially along with time marching steps. The accuracy is also improved exponentially with the increasing of nodes before stable accuracy is achieved, while it keeps stably with the increasing of the time step. The central processing unit time increases exponentially with the increasing of nodes and decreasing of the time step. Research limitations/implications It is difficult for the implementation of the implicit scheme by the developed SCM-ACM. The SCM-ACM can be used for solving unsteady impressible fluid flow and heat transfer. Practical implications The SCM-ACM is applied for two classic cases of lid-driven cavity flow and natural convection in cubic cavities. The present results show good agreement with the published results with much fewer nodes. Originality/value The combined method SCM-ACM is developed, firstly, for solving three-dimensional incompressible fluid flow and heat transfer by the SCM and ACM. The performance of SCM-ACM is investigated. This combined method provides a new choice for solving three-dimensional fluid flow and heat transfer with high accuracy.

Sign in / Sign up

Export Citation Format

Share Document