Reducing failure rate at high voltage (HV) testing of insulator using Six Sigma methodology

2018 ◽  
Vol 67 (5) ◽  
pp. 791-808 ◽  
Author(s):  
Darshak A. Desai ◽  
Aurangzeb Javed Ahmed Shaikh
Keyword(s):  
Failure Rate ◽  
High Voltage ◽  
Six Sigma ◽  
Manufacturing Industry ◽  
Small Scale ◽  
Case Study Methodology ◽  
Content Type ◽  
Sigma Level ◽  
Ceramic Manufacturing

PurposeThis paper, a case study, aims to illustrate the application of Six Sigma in a small-scale ceramic manufacturing industry. The purpose of this paper is to demonstrate the empirical application of DMAIC methodology to reduce failure rate at high voltage (HV) testing of one of the most critical products, insulator.Design/methodology/approachThe case study is based on primary data collected from a real-life situation prevailing in the industry. The case study methodology adopted here is at one small-scale unit wherein the authors have applied DMAIC methodology and observed and recorded the improvement results, especially, reduction in failure rate at HV testing of insulator and, thus, increase in Sigma level.FindingsThe results found after implementation of the solutions are very significant. The rejection percentage has been reduced from 0.5 to 0.1 percent and consequently the Sigma level has been improved from 4.4 to 5.0.Research limitations/implicationsThis success story can be a guiding roadmap for other such industries to successfully implement Six Sigma to improve quality, productivity and profitability.Practical implicationsThis case study will serve as one of the resource bases for the industries which have till not implemented Six Sigma and benefited from the same.Social implicationsImproved quality and productivity leads to better economy. This case will help industries to serve the society with better economy with improved quality and productivity.Originality/valueThough ceramic industries in India are having enormous potential for growth, majority of them, especially, small and medium industries are either not aware of or not implementing Six Sigma to reap its multidimensional benefits of improving quality, productivity and profitability. This study highlights the benefits reaped by small-scale ceramic manufacturing industry opening up the avenues for its application at other such organizations.

SMED for quick changeover in manufacturing industry – a case study

2018 ◽  
Vol 25 (7) ◽  
pp. 2065-2088 ◽  
Author(s):  
Jagdeep Singh ◽  
Harwinder Singh ◽  
Inderdeep Singh
Keyword(s):  
Manufacturing Industry ◽  
Setup Time ◽  
Industrial Engineering ◽  
Small Scale ◽  
Small Enterprises ◽  
Production Environment ◽  
Content Type ◽  
Northern India ◽  
Manufacturing Environments

Purpose The purpose of this paper is to uncover the significance of SMED in manufacturing environments. Design/methodology/approach The paper gives setup instructions and guidelines to prepare the standardized setup procedure without ignoring actual constraints in production environment. It uses a case study in a small-scale manufacturing unit of northern India to generate an integrated setup reduction approach, utilizing Single Minute Exchange of Die (SMED)-based industrial engineering tools to achieve faster setups. It describes the feasibility of quick changeovers in small enterprises based on an “SMED” approach. Finally, the paper carries out empirical analysis of the financial/non-financial benefits incurred from setup reductions. Findings Setup activities are a vital part of the production lead time of any product and so affect overall product cost. Industrial engineering techniques have been used to analyze the existing procedure of setups. A SMED approach can help eliminate unwanted activities, externalize the internal activities, if possible, and reduce them by simplification or standardization. Originality/value The paper demonstrates the practical application of SMED showing how it can bring real breakthroughs in reducing setup time in small-scale manufacturing.

Implementing a Lean Six Sigma standardized toolset in a manufacturing company: a case study

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nikolaos A. Panayiotou ◽  
Konstantinos E. Stergiou ◽  
Vassilis Chronopoulos
Keyword(s):  
Case Studies ◽  
Six Sigma ◽  
Success Factors ◽  
Manufacturing Sector ◽  
Lean Six Sigma ◽  
Small Scale ◽  
Manufacturing Companies ◽  
Content Type ◽  
Manufacturing Company

PurposeThe first purpose of this paper is the implementation of Lean Six Sigma (LSS) in a manufacturing company operating in South East Europe in order to understand the importance of critical success factors (CSFs) in LSS adoption and to find out the benefits that the company gained. The second purpose is to propose a standardized toolset based on DMAIC phases, for the application of LSS in small scale projects, in order to facilitate LSS adoption by more manufacturing companies.Design/methodology/approachThis case study is based on the interlacement of the Yin's method about case studies and the DMAIC method for the improved deployment of LSS.FindingsThe analysis of this case study shows that the company attained to benefit financially, operationally and organizationally from the implementation of LSS. The already existing mentality of CI inside the company helped the project procedure and the application of changes and improvements fulfilling LSS adoption CSFs.Practical implicationsThe paper constructs a toolset and studies the role of CSFs in order to achieve the desirable benefits in a manufacturing environment, constituting a guide for future LSS initiatives.Originality/valueAs stated by literature reviews, even though there are several papers concerning LSS implementation in the manufacturing sector, there is a need for more case studies papers, such as this one, in order to enrich the literature. In this paper, it is also the first time that a specific toolset for small scale projects is proposed based on to DMAIC which can be implemented in further LSS projects.

Application of Six Sigma to minimize the defects in glass manufacturing industry

2019 ◽  
Vol 16 (4) ◽  
pp. 594-624 ◽  
Author(s):  
Narottam Yadav ◽  
Kaliyan Mathiyazhagan ◽  
Krishna Kumar
Keyword(s):  
Six Sigma ◽  
Manufacturing Industry ◽  
Poor Performance ◽  
Service Industries ◽  
Practical Implementation ◽  
Content Type ◽  
Six Sigma Methodology ◽  
Tools And Techniques ◽  
And Control

PurposeThe purpose of this paper is to improve the yield of a particular model of a car windshield, as the organization faces losses due to poor performance and rejection.Design/methodology/approachThe Six Sigma DMAIC (define, measure, analyze, improve and control) methodology is used to reduce variation and defects in the process. It is a methodology based on data-driven and fact-based analysis to find out the root cause of the problem with the help of statistical analysis. A worst performing model is selected as a case study through the scoping tree. The preprocess, printing, bending and layup process defects are reduced by analyzing the potential causes and hypothesis testing.FindingsThis paper describes Six Sigma methodology in a glass manufacturing industry in India for automotive applications. The overall yield of a car windshield achieved 93.57 percent against the historical yield of 88.4 percent, resulting in saving 50 lacs per annum. Due to no rework or repairing in the glass, low first-time yield causes major losses. Process improvement through focused cross-functional team reduces variation in the process. Six Sigma improves profitability and reduces defects in the automotive glass manufacturing process.Research limitations/implicationsThis case study is applied in automotive glass manufacturing industries. For service and healthcare industries, a similar type of study can be performed. Further research on the common type of processor industry would be valuable.Practical implicationsThe case study can be used as a problem-solving methodology in manufacturing and service industries. The tools and techniques can be used in other manufacturing processes also. This paper is useful for industries, researchers and academics for understanding Six Sigma methodology and its practical implementation.Originality/valueThis case study is an attempt to solve automobile glass manufacturing problems through DMAIC approach. The paper is a real case study showing benefits of Six Sigma implementation in the manufacturing industry and saving an annual cost of 50 lacs due to rejections in the process.

Competitive advantage through Six Sigma in sand casting industry to improve overall first-pass yield: a case study of SSE

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mihir Solanki ◽  
Darshak Desai
Keyword(s):  
Six Sigma ◽  
Sand Casting ◽  
Small Scale ◽  
Productivity Improvement ◽  
Content Type ◽  
Foundry Industry ◽  
Road Map ◽  
First Pass ◽  
Six Sigma Methodology

Purpose The purpose of this paper is to illustrate how Six Sigma methodology has been applied in a small-scale foundry industry to improve the overall first-pass material yield and quality, with a view to the product and the process. Design/methodology/approach The researchers have reported this paper based on a case study carried out in industry using the Six Sigma Define, Measure, Analyze, Improve and Control (DMAIC) and its application in improving the manufacturing process of a foundry shop. Findings Identified root causes are validated and countermeasures are implemented for improvement. As a result of this case study, the overall first-pass yield of the sand casting process is improved to 78.88% from the previous yield of 67%. For product-specific case, yield is improved by 18% through the improved gating system design. Sigma level of the process is improved to 3.08 from baseline 2.21. Key lessons learned from this case study are mentioned in the current study. Research limitations/implications This case study provides a standard road map and motivates small-scale foundry industries to implement Six Sigma methodology for productivity improvement, especially in jobbing foundry. The presented paper is based on a single case study, and the results are limited to the company only. Also, one of the reasons for low process yield is slag creation, which is not covered here, as it is a concern of the material quality supplied by the vendor. However, the approach of this paper is generic for learning perspective. Practical implications This case study provides a standard road map and motivates small-scale foundry industries to implement Six Sigma methodology for productivity improvement, especially in jobbing foundry. Through the effective application of Six Sigma quality initiative, how a quantum jump in financial aspect could be gain, has been demonstrated. Originality/value This research study showcases step-by-step implementation of Six Sigma-DMAIC methodology at a small-scale foundry industry. This paper could serve as a unique roadmap for practitioners and academicians to improve the material productivity of the foundry industry both ways, product and process.

scholarly journals STUDY OF FEASIBILITY OF SIX SIGMA IMPLEMENTATION IN A MANUFACTURING INDUSTRY : A CASE STUDY

2014 ◽  
pp. 296-300
Author(s):  
MEHDIUZ ZAMAN ◽  
SUJIT KUMAR PATTANAYAK ◽  
ARUN CHANDRA PAUL
Keyword(s):  
Six Sigma ◽  
Capital Investment ◽  
Manufacturing Industry ◽  
Study Data ◽  
Quality Level ◽  
Control Approach ◽  
Sigma Level ◽  
Six Sigma Methodology ◽  
Welding Electrode

This paper discusses the implementation of Six-sigma methodology in reducing rejection in a welding electrode manufacturing industry. The Six-sigma DMAIC (define– measure – analyse –improve – control) approach has been used to achieve this result. This paper explains the step-by-step approach of Six-sigma implementation in this manufacturing process for improving quality level. This resulted in reduction of rejection, and thus, reduced the Defect Per Million Output (DPMO) from 28356.96 to 1666.67. This had resulted in increasing the sigma level from 3.41 to 4.43, without any huge capital investment. During this study, data were collected on all possible causes and was analysed and thereby conclusions were made. Implementation of Six-sigma methodology has resulted in large financial savings for the industry.

Six Sigma for improving cash flow deficit: a case study in the food can manufacturing industry

2020 ◽  
Vol 11 (6) ◽  
pp. 1119-1140 ◽  
Author(s):  
Maria-Victòria Sánchez-Rebull ◽  
Ramon Ferrer-Rullan ◽  
Ana-Beatriz Hernández-Lara ◽  
Angels Niñerola
Keyword(s):  
Cash Flow ◽  
Six Sigma ◽  
Bargaining Power ◽  
Qualitative Methodology ◽  
Manufacturing Industry ◽  
Case Study Research ◽  
Control Process ◽  
Content Type ◽  
Six Sigma Methodology

Purpose Cash flow deficit situations and working capital control are major challenges for many companies, especially those whose suppliers and clients have strong bargaining power. This study aims to describe the application of the Six Sigma methodology for solving these problems in a large German food can manufacturing company. Design/methodology/approach This paper follows the qualitative methodology of case study research. During different define, measure, analyse, improve and control process phases, the problem and critical aspects are identified to improve the quality of the payment process and improvements are suggested and implemented. Findings The results provide evidence of how Six Sigma can be useful in administrative–financial processes that are carried out within a company. This result is particularly interesting because it is about processes that have not applied Six Sigma methodology. For the company studied, this methodology has balanced its cash flow and this meant large amounts of savings, especially in bank interest to avoid having to ask for bank credits. Originality/value This case can be extrapolated to other companies, regardless of the company size, that present similar symptoms of cash deficit, especially if their bargaining power with suppliers and customers is low.

Application of Six Sigma methodology in a small-scale foundry industry

2014 ◽  
Vol 5 (2) ◽  
pp. 193-211 ◽  
Author(s):  
E.V. Gijo ◽  
Shreeranga Bhat ◽  
N.A. Jnanesh
Keyword(s):  
Six Sigma ◽  
Single Case ◽  
Leaf Spring ◽  
Small Scale ◽  
Content Type ◽  
Foundry Industry ◽  
Small Scale Industry ◽  
Six Sigma Methodology ◽  
Finance Department

Purpose – The purpose of this article is to illustrate how the Six Sigma methodology was applied to a small-scale foundry industry to reduce the rejections and rework in one of its processes. Design/methodology/approach – The research reported in this paper is based on a case study carried out in an industry using the Six Sigma Define-Measure-Analyze-Improve-Control (DMAIC) approach and its application in improving the leaf spring manufacturing process of a foundry shop. Findings – The root causes for the problem of rejection and rework were identified through data-based analysis at different stages in the project. The process parameters were optimized and measures for sustainability of the results were incorporated in the process. As a result of this study, the overall rejection was reduced from 48.33 to 0.79 per cent, which was a remarkable achievement for this small-scale industry. This was leading to improvement in on-time delivery to the customer. The finance department of the company estimated the annualized savings due to the reduction in rejection and was to the tune of USD8,000 per year. Research limitations/implications – The paper is based on a single case study executed in a company, and hence, there is limitation in generalizing the specific results from the study. However, the approach adopted and the learning from this study can be generalized. Originality/value – This article illustrates the step-by-step application of Six Sigma DMAIC methodology in a small-scale foundry industry to solve an age-old problem in the organization. Thus, this article will be helpful for those professionals who are interested in implementing Six Sigma to such industries.

Using Lean Six Sigma in small and medium-sized enterprises for low-cost/high-effect improvement initiatives: a case study

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nikolaos A. Panayiotou ◽  
Konstantinos E. Stergiou ◽  
Nikolaos Panagiotou
Keyword(s):  
Case Studies ◽  
Six Sigma ◽  
Success Factors ◽  
Low Cost ◽  
Lean Six Sigma ◽  
Small Scale ◽  
Content Type ◽  
High Effect ◽  
The Impact

PurposeThe purpose of this paper is the implementation of Lean Six Sigma (LSS) in a manufacturing small and medium-sized enterprise (SME) in Greece in order to understand the contribution of LSS in its process improvement and to identify the parameters playing a crucial role in LSS adoption by SMEs. The ability to achieve high-effect improvements without cost investment is also examined to cope with low investment margin that is a characteristic of SMEs.Design/methodology/approachThis case study is based on the combination of Define, Measure, Analyze, Improve and Control (DMAIC) phases with the Yin's method for case studies for a complete and efficient implementation and presentation of the project.FindingsThe analysis of this case study revealed that by accomplishing specific critical success factors for the fulfillment of the LSS project, the company attained important benefits by utilizing only the working hours of employees. It was also found that the improvements of LSS projects can be measured using other metrics which can indirectly be translated into monetary terms.Practical implicationsThe paper can be a useful guide of how SMEs can achieve high-impact improvements with low or no investment cost utilizing LSS initiatives in small-scale projects.Originality/valueAccording to the literature, there is a need for more case studies concerning LSS implementation in SMEs. Examples of how low-cost/high-effect improvement initiatives can be implemented have not been adequately presented before. The assessment of the impact of improvement initiatives with non-monetary measures is also innovative.

scholarly journals Roles, relationships and emotions: Student teachers’ understanding of feedback as interpersonal

2021 ◽  
pp. 003452372198937
Author(s):  
Caroline Elbra-Ramsay
Keyword(s):  
Teacher Education ◽  
Student Teachers ◽  
Small Scale ◽  
First Year ◽  
Case Study Methodology ◽  
Study Methodology ◽  
Undergraduate Programme ◽  
Phenomenological Case Study ◽  
International Teacher

This paper reports the findings of a small-scale study seeking to investigate how student teachers, within a three-year undergraduate programme, understand feedback. Feedback has been central to debates and discussion in the assessment literature in recent years. Hence, in this paper, feedback is positioned within the often-contradictory discourses of assessment, including perspectives on student and teacher feedback. The study focused on two first year undergraduate student teachers at a small university in England and considered the relationships between their understanding of feedback as a student, their understanding of feedback as an emerging teacher, and the key influences shaping these understandings. A phenomenological case study methodology was employed with interviews as the prime method of data collection. Themes emerged as part of an Nvivo analysis, including emotional responses, relationships and dialogue, all of which appear to have impacted on the students’ conceptual understanding of feedback as indelibly shaped by its interpersonal and affective, rather than purely cognitive or ideational, dimensions. The paper therefore seeks to contribute to the wider feedback discourse by offering an analysis of empirical data. Although situated within English teacher education, there are tentative conclusions that are applicable to international teacher education and as well as higher education more generally.

Sign in / Sign up

Export Citation Format

Share Document