The rise and decline of TQM in the NHS

2014 ◽  
Vol 26 (5) ◽  
pp. 499-509 ◽  
Author(s):  
Uche Nwabueze

Purpose – The purpose of this paper is to delineate the factors responsible for the decline of total quality management (TQM) in the National Health Service (NHS). It is suggested that if these factors were initially identified and eliminated prior to implementation, the decline of TQM as a strategy for improving the provision and delivery of quality patient care could have been prevented. Design/methodology/approach – The case study approach was chosen because it is the preferred method when “how” or “what” questions are being posed. It is applicable as is evident in this paper where the researcher has little control over events and when the focus is on a contemporary phenomenon within some real-life context. The case study enables the researcher to give an accurate rendition of actual events; it contributes uniquely to the knowledge of individual, organisational, social, and political phenomena. The semi-structured face-to-face interview constituted the main data collection technique of the research. Interviews were held with 23 quality management managers in the British NHS. The central focus of the interview was on “what” factors contributed to the rapid decline of TQM in the NHS. The respondents were chosen because they were directly involved with the implementation of TQM. They were in the vintage position to offer a full insight into the TQM initiative. The analysis of the case is based on Yin's analytic technique of explanation building. Findings – The decline of TQM in the NHS could have been prevented if top executives in hospitals had adopted the sequential steps to quality improvement: In the authors opinion, to land a man on the moon needed a belief in the possibility and breakthrough in the attitudes that viewed space travel as pure science fiction as opposed to a practical reality, and so it should have been with TQM in the NHS. However, the attitude of many NHS managers was that TQM was all right for “other institutions” because “they need it” whereas in the NHS, “we don’t”. This negative attitude should have been overcome if TQM was to be accepted as a corporate, all encompassing philosophy. Research limitations/implications – The limitation of the research may be the sample size of the respondents, which was limited to 23 quality managers that had hands-on experience and the leadership role to lead and implement TQM in the NHS. Future research may consider a broader sample size. It may also be considered for new research to use surveys to identify a broader set of reasons why TQM declined in the NHS. Practical implications – This paper is the first constructive insight to determine reasons for the decline of TQM in the NHS from the individuals who had the sole responsibility for implementation. Any other, group would have amounted to hearsay. Therefore, to constructively delineate the reasons for failure, it was pertinent to learn from the quality managers directly and to ensure that the reasons was representative of their experiences with TQM. The practical implication is to prepare future managers about how to avoid failure. Originality/value – The paper clearly suggests the systematic process required for effective implementation of TQM in a healthcare setting by identifying factors that must be avoided to ensure the successful and sustainable implementation of TQM.

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fabiane Florencio de Souza ◽  
Alana Corsi ◽  
Regina Negri Pagani ◽  
Giles Balbinotti ◽  
João Luiz Kovaleski

PurposeThe purpose of this article is to explore the new concept of TQM 4.0 as a way of adapting quality management (QM) in Industry 4.0 (I4.0), guiding industries to this new phase, which has generated adaptations in numerous areas, one of which is QM and human resources.Design/methodology/approachA systematic review of the literature was carried out. Methodi Ordinatio was applied to build the portfolio of articles with scientific relevance, which is the source of data collections and content analysis. To help out in the analysis, NVivo 12 and VOSviewer software programs were used.FindingsThe results demonstrate that when adapting the QM to the technologies of I4.0, the result is an ecosystem that supports the integration between technology, quality and people in the industrial scenario.Research limitations/implicationsThis article presents a systematic review of the literature, but without delving into specific issues such as the different industrial sectors and the culture of countries in which industries may be inserted, for example, which characterizes a limitation of this research.Practical implicationsThis study provides an ecosystem model that can guide future research, regarding the concept of TQM 4.0, in addition to pointing out some ways of combining technologies, quality and people in the industrial context.Originality/valueThis is one of the first articles to employ a systematic review of the literature using Methodi Ordinatio to build a bibliographic panorama on the intertwining of the themes total QM (TQM) and I4.0, focusing on the emerging concept of TQM 4.0.


Author(s):  
Shweta Bajaj ◽  
Ruchi Garg ◽  
Monika Sethi

Purpose Due to its impact on business performance total quality management (TQM) has gained a lot of importance by businessmen, managers, practitioners, and research scholars over the last 20 years. Therefore, the purpose of this paper is to critically assess the literature on TQM and find out the areas where future research is required. Design/methodology/approach To achieve this purpose the articles published in the last 20 years were studied in a systematic way and a snapshot of the same was prepared in the tabular format with points such as year and journal of publication, application and country, statistical method used, and findings of the study such as practices and impact of TQM. After identifying the practices and impact of TQM a quality tool “Pareto Analysis” was applied on them for development of the model. Findings The findings provide the practices of TQM and its impact on the performance of a business. The gaps from the literature have been identified and areas for future research have been suggested. On the basis of the findings a generalized framework of TQM has been suggested which can be applicable irrespective of the sector. Practical implications The research will help academicians and future researchers to have a clear understanding of TQM in different rosters. Originality/value Ample literature is available on TQM but in the best knowledge of authors no study has taken place to integrate the reviews and findings of 102 research papers of the last two decades.


2014 ◽  
Vol 31 (8) ◽  
pp. 906-920 ◽  
Author(s):  
Majed Alsmadi ◽  
Ahmad Almani ◽  
Zulfiqar Khan

Purpose – The purpose of this paper is to implement an integrated activity-based costing (ABC) and theory of constraints (TOC) approach to enhance decision making in a Lean company. Design/methodology/approach – Based on the literature, this paper proposes an integrated ABC and TOC approach and applies it to a Lean plastic manufacturing company to improve its product-mix decision. Findings – The results of the case study show that the current conventional product-mix decision used by the company and the proposed integrated approach can give significantly different results concerning the optimal product-mix and the associated bottlenecks. Moreover, the paper suggests that managers who implement Lean production without utilising a supportive management accounting system may experience disappointing financial results. Research limitations/implications – The validation of the suggested method is based on a single case study with an action research approach. For future research, the authors suggest the implementation of the approach in different industries. Practical implications – Overall, the integration of ABC and TOC provides managers with an accurate, timely and reliable tool that can help in making decisions about pricing, production line development, process improvements and product-mix. Originality/value – This paper contributes to Lean and management accounting literature by demonstrating the value of a method of integrating ABC and TOC. Also a case study is chosen for the empirical aspect of the study as there are no case studies available in the literature that illustrate a real life case of integrating ABC and TOC within Lean companies as an alternative to the current used cost accounting systems.


2019 ◽  
Vol 17 (5) ◽  
pp. 960-984 ◽  
Author(s):  
Yayha Al-Saeed ◽  
Erika Parn ◽  
David John Edwards ◽  
Stephen Scaysbrook

PurposeConstruction manufacturers predominantly rely upon antiquated manual design and production processes and procedures because they lack technical skills needed to automate working practices. This paper aims to automate manufacturing processes by optimising the utilisation of BIM digital objects (BDO) via the development of a conceptual model. Concomitant objectives seek to reduce design errors; eliminate unnecessary costs; automate the generation of quantity bills; and maximise productivity performance.Design/methodology/approachAn inductive approach was adopted through a post positivist epistemological lens set within the context of a case study of a small- and medium-sized enterprise. From an operational perspective, both qualitative and quantitative data were collected and analysed via a novel four-phase waterfall design, namely, literature diagnosis; recording contemporary practice; mapping manufacturing workflow and procedures; and evaluation and proof of concept development.FindingsThe work illustrates that BDO enhances manufacturing workflow, reduces product manufacturing lead time and augments quality assurance throughout the whole life cycle of a manufactured product. The conceptual model developed provides a pragmatic and comprehensive solution to automate construction manufacturing procedures and to improve the facilitation of information exchanged between all stakeholders involved.Originality/valueThis study presents the first comprehensive case study of BDO application within a manufacturing context. Future research is however, needed to test and validate the conceptual model presented in practice. In doing so, the model can be further refined using practitioner input and real-life manufacturing processes and procedures.


2017 ◽  
Vol 9 (1) ◽  
pp. 41-66 ◽  
Author(s):  
Evangelos Psomas ◽  
Fotis Vouzas ◽  
Nancy Bouranta ◽  
Mary Tasiou

Purpose The purpose of this study is to determine the main total quality management (TQM) factors adopted and the respective results achieved by local authorities – municipalities. Determining the degree to which TQM influences the respective results is also an aim of the present study. Design/methodology/approach A research study was designed to be carried out in Greek local authorities – municipalities, 125 of which were approached through interviews with chief executive officers (CEOs) based on a structured questionnaire. The TQM practices and results identified in the literature were used as measured variables of the questionnaire. Descriptive statistics and linear regression analyses were applied for the purpose of the study. Findings The TQM philosophy is not highly adopted by the Greek local authorities participating in the present study. Moreover, the Greek local authorities do not seem to derive significant TQM benefits. Finally, adopting TQM strongly and positively influences, first, operational and quality performance of the local authorities; second, citizen satisfaction and society results; and third, employee satisfaction. Research limitations/implications Subjective data were collected from the CEOs of a small sample of local authorities operating in a European Union country, under circumstances of financial crisis. Based on these limitations, future research studies are recommended. Practical implications Areas for improvement are identified for a local authority to develop a robust TQM model, approach business excellence and derive significant benefits. Originality/value This is the first research study in the field of TQM to be conducted at city-level administration in Greece.


2014 ◽  
Vol 4 (1) ◽  
pp. 1-10
Author(s):  
Fatima Mohsen Al Faqeeh ◽  
Syed Zamberi Ahmad

Subject Area Total quality management, logistic, entrepreneurship, management and small business management. Study level/applicability The case is relevant for undergraduates specializing in business. The case incorporates courses such as entrepreneurship and small business management. Case overview This case study outlines the factors behind the success of the Royal Transportation Management Systems Company. This company was established in 2007 and has become one of the most successful valet parking companies in Abu Dhabi. The case study will also highlight the company's core concept which is quality as baseline towards success of the business and how this has influenced the success of the company. Expected learning outcomes The case can be used to understand management concepts in entrepreneurship, small business management, and total quality management concepts in the provision of high-quality services, and help students to understand marketing strategies for developing a successful small business. Supplementary materials Teaching notes are available for educators only. Please contact your library to gain login details or email [email protected] to request teaching notes.


2017 ◽  
Vol 36 (3) ◽  
pp. 376-389 ◽  
Author(s):  
S.M. Riad Shams

Purpose Quality assurance is a key concern in higher education, which is more complex in offshore transnational education (TNE), compared to onshore provision of education service. However, higher education quality assurance is an established research domain; there is very limited work on the efficacy of industry-based total quality management (TQM) considerations to uphold quality in higher education, particularly in TNE. From this context, the purpose of this paper is to develop new insights in this under-researched area. Design/methodology/approach An inductive constructivist approach is followed to analyse extant scholarly views in relevant disciplinary areas to develop new insights, in relation to the significance of industry-based TQM in TNEs’ quality assurance. Findings Stakeholder orientation is recognised, as a significant consideration to uphold quality in TNE. Different stakeholders are identified, who would have substantial influence on TNEs’ TQM. How these stakeholders could influence the TQM process is clarified. Some empirical insights are also developed, in support of the arguments of the paper. Practical implications These insights will be useful for education administrators to better align their stakeholder relationships to underpin TQM. Academics will be able to use these insights as a basis for future research towards the significance of industry-based TQM in higher education. Originality/value Based on a stakeholder-focussed TNE TQM model, the findings represent an innovative strategic direction towards a better understanding of the significance of stakeholder relationships, pertaining to TQM in the contemporary higher education system.


2016 ◽  
Vol 45 (5) ◽  
pp. 1029-1046 ◽  
Author(s):  
Sim Siew-Chen ◽  
Gowrie Vinayan

Purpose – The purpose of this paper is to provide insights into the conduct of recruitment process outsourcing (RPO), based on a real-life case study of one company in Malaysia. The paper analyses the company’s process of recruitment outsourcing from beginning to end, in three sections: RPO decision, RPO implementation and RPO outcome. Design/methodology/approach – The case study was carried out through semi-structured interviews with relevant respondents, including the country HR manager, the HR staff and operation managers in the organisation, plus with the RPO provider. Findings – The key findings, from a theoretical and academic viewpoint, are that RPO decisions and implementation cannot be fully or properly explained by one theory, but are better explained by integrating transaction cost economics, the resource-based view and the Agency Theory. The study also highlights the importance of involving end users in the RPO process. Research limitations/implications – While this single case study gives a clear, in-depth insight into the issues in this particular instance, future research extending to a wider range of organisations would serve to expand the findings and provide more generalisable results. Practical implications – Practitioners and service providers should be able to draw valuable lessons from the experience of Tech-solution, particularly from the different perceptions and levels of satisfaction about the service provider’s performance between internal HR and the internal end users (operation managers). Originality/value – This paper provides a specific and detailed analysis of RPO implementation in practice. It also addresses the call for more RPO outsourcing-specific research in the extant literature.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Bita Yazdani

PurposeThe purpose of this study is to investigate the relationship between total quality management (TQM), employee outcomes and performance. Moreover, how environmental uncertainty (EU) influences the relationship between employee outcomes and performance is regarded in the context of automobile part manufacturing and suppliers of Iran. Four theories namely resource-based view theory, ability, motivation, opportunity framework, contingency theory and quality management theory have been adopted in this research.Design/methodology/approachA research project is conducted in 191 automobile part manufacturing and suppliers plants using the questionnaire method. Confirmatory factor analysis is applied to assess the reliability and validity of the measurement instrument. The correlations between latent constructs are examined through partial least squares method.FindingsThe results show positive relationship between TQM, employee outcome and performance. The EU also moderates the relationship between employee outcome and performance.Research limitations/implicationsIt is recommended that some contextual factors such as culture be noticed in future research studies. Data were collected from Iranian automobile part manufacturing and suppliers plants, which may limit the generalization of results to other organizations in other countries.Practical implicationsIn this paper, some beneficial insights are addressed to assist managers in recognizing the organizational problems, which weaken implementing TQM, employee outcomes and the effect of EU on organizations.Social implicationsBy improving the quality of management practices and employee outcomes, the society gains benefits such as customer satisfaction.Originality/valueThis study contributes to the TQM advance and human resource management literature and provides better foundations for employee outcomes improvement through TQM practices in the Middle East. By investigating the effect of EU, this study fills the current gap in this field.


2014 ◽  
Vol 4 (3) ◽  
pp. 1-13
Author(s):  
Hajar Saeed Hamad Alhubaishi ◽  
Syed Zamberi Ahmad

Subject area Business management, quality management, service quality and customer service in public sectors. Study level/applicability This case is most relevant to upper-level undergraduate business students taking quality management, strategy and service management courses. It is also relevant to practitioners working in similar positions. The case is based on primary and secondary data, and all materials mentioned were taken from real work environments. Case overview In contemporary competitive markets, all entities face a growing challenge to retain customers by satisfying them. In this case study of Ajman Free Zone Authority (AFZA), which is a public entity which was started in 1988 with the aim of boosting industrial development in Ajman, it is seen that the entity (AFZA) recognized a competitive advantage by improving service quality. However, AFZA focused on implementing various service quality improvement initiatives for not only customers, but also for other stakeholders as well (e.g. employees, strategic partners, suppliers and society). AFZA sought to understand stakeholders' needs, which led to service excellence. The purpose of this case is to highlight how AFZA differentiated itself by using initiatives that focused on disparate stakeholders to achieve customer satisfaction. The concepts of service quality (SERVQUAL), total quality management (TQM) and continuous improvement offer insights into how to improve organizational performance. It highlights how AFZA used Stakeholder Theory to identify and then collaborate with stakeholders to attain best service quality outcomes. The case study is developed using both secondary and primary sources. Expected learning outcomes After reading and analysing this case study, the student will be able to identify stakeholders in a service-based entity; apply Deming's Cycle or SERVQUAL to suggest improvement programmes; describe relationships among all stakeholders; and describe initiatives that contribute to service excellence. Supplementary materials Teaching Notes are available for educators only. Please contact your library to gain login details or email [email protected] to request teaching notes.


Sign in / Sign up

Export Citation Format

Share Document