Dynamic Equivalent Circuit Design in Three-level High Voltage Inverters Based On Functional Model of IGCT

2007 ◽  
Author(s):  
Hua Bai ◽  
Zhengming Zhao
Keyword(s):  
Equivalent Circuit ◽  
Circuit Design ◽  
High Voltage ◽  
Functional Model ◽  
Dynamic Equivalent

scholarly journals Modeling Stray Capacitances of High-Voltage Capacitive Dividers for Conventional Measurement Setups

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1262
Author(s):  
Alessandro Mingotti ◽  
Federica Costa ◽  
Lorenzo Peretto ◽  
Roberto Tinarelli ◽  
Paolo Mazza
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Equivalent Circuit ◽  
High Voltage ◽  
Equivalent Model ◽  
Simulation Environment ◽  
Element Analysis ◽  
Ratio Error ◽  
Complicated Geometries

Stray capacitances (SCs) are a serious issue in high-voltage (HV) applications. Their presence can alter the circuit or the operation of a device, resulting in wrong or even disastrous consequences. To this purpose, in this work, we describe the modeling of SCs in HV capacitive dividers. Such modeling does not rely on finite element analysis or complicated geometries; instead, it starts from an equivalent circuit of a conventional measurement setup described by the standard IEC 61869-11. Once the equivalent model including the SCs is found, closed expressions of the SCs are derived starting from the ratio error definition. Afterwards, they are validated in a simulation environment by implementing various circuit configurations. The results demonstrate the expressions applicability and effectiveness; hence, thanks to their simplicity, they can be implemented by system operators, researchers, and manufacturers avoiding the use of complicated methods and technologies.

Device and Circuit Design for Improving the Freewheeling Characteristics of High Voltage Monolithic IC

2020 ◽  
pp. 1-1
Author(s):  
Jing Zhu ◽  
Siyuan Yu ◽  
Guichuang Zhu ◽  
Weifeng Sun ◽  
Yunqi Wang ◽  
...  
Keyword(s):  
Circuit Design ◽  
High Voltage

Augmented Short-Circuit Test for the Measurement of Transformer Equivalent-Circuit Parameters with Large Series Branch Impedances

2010 ◽  
Vol 47 (1) ◽  
pp. 86-93
Author(s):  
Saurabh Kumar Mukerji ◽  
Moleykutty George
Keyword(s):  
Equivalent Circuit ◽  
High Voltage ◽  
Single Phase ◽  
Short Circuit ◽  
Large Series ◽  
Test Results ◽  
Voltage Supply ◽  
Short Circuit Test ◽  
Equivalent Circuit Parameters

An augmented short-circuit test is described for the determination of equivalent-circuit parameters of single-phase transformers with large series-branch impedances. This test may be conducted at rated currents with the transformer connected to a reduced voltage supply. Thus harmonics in current and voltage waves are negligible. This test is therefore free from harmonics-associated errors. Based on test results, phasor equations are found which give formulae for the equivalent-circuit parameters with series-branch impedance split into low- and high-voltage components.

Sign in / Sign up

Export Citation Format

Share Document