Planning of reliability life tests within the accuracy, time and cost triangle

Author(s):  
Martin Dazer ◽  
Matthias Stohrer ◽  
Stefan Kemmler ◽  
Bernd Bertsche
Keyword(s):  
Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2163
Author(s):  
Tarek Berghout ◽  
Mohamed Benbouzid ◽  
Leïla-Hayet Mouss

Since bearing deterioration patterns are difficult to collect from real, long lifetime scenarios, data-driven research has been directed towards recovering them by imposing accelerated life tests. Consequently, insufficiently recovered features due to rapid damage propagation seem more likely to lead to poorly generalized learning machines. Knowledge-driven learning comes as a solution by providing prior assumptions from transfer learning. Likewise, the absence of true labels was able to create inconsistency related problems between samples, and teacher-given label behaviors led to more ill-posed predictors. Therefore, in an attempt to overcome the incomplete, unlabeled data drawbacks, a new autoencoder has been designed as an additional source that could correlate inputs and labels by exploiting label information in a completely unsupervised learning scheme. Additionally, its stacked denoising version seems to more robustly be able to recover them for new unseen data. Due to the non-stationary and sequentially driven nature of samples, recovered representations have been fed into a transfer learning, convolutional, long–short-term memory neural network for further meaningful learning representations. The assessment procedures were benchmarked against recent methods under different training datasets. The obtained results led to more efficiency confirming the strength of the new learning path.


2021 ◽  
Vol 11 (7) ◽  
pp. 3272
Author(s):  
Sara Stelitano ◽  
Alberto Rullo ◽  
Luigi Piredda ◽  
Elisabetta Mecozzi ◽  
Luigi Di Vito ◽  
...  

The target for European decarburization encourages the use of renewable energy sources and H2 is considered the link in the global energy system transformation. So, research studies are numerous, but only few facilities can test materials and components for H2 storage. This work offers a brief review of H2 storage methods and presents the preliminary results obtained in a new facility. Slow strain rate and fatigue life tests were performed in H2 at 80 MPa on specimens and a tank of AISI 4145, respectively. Besides, the storage capacity at 30 MPa of a solid-state system, they were evaluated on kg scale by adsorption test. The results have shown the H2 influence on mechanical properties of the steel. The adsorption test showed a gain of 26% at 12 MPa in H2 storage with respect to the empty condition. All samples have been characterized by complementary techniques in order to connect the H2 effect with material properties.


Antioxidants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 287
Author(s):  
Donny W. H. Merkx ◽  
Andries Swager ◽  
Ewoud J. J. van Velzen ◽  
John P. M. van Duynhoven ◽  
Marie Hennebelle

Food emulsions with high amounts of unsaturated fats, such as mayonnaise, are prone to lipid oxidation. In the food industry, typically accelerated shelf life tests are applied to assess the oxidative stability of different formulations. Here, the appearance of aldehydes at the so-called onset time, typically weeks, is considered a measure for oxidative stability of food emulsions, such as mayonnaise. To enable earlier assessment of compromised shelf-life, a predictive model for volatile off-flavor generation is developed. The model is based on the formation kinetics of hydroperoxides, which are early oxidation products and precursors of volatile aldehydes, responsible for off-flavor. Under accelerated shelf-life conditions (50 °C), hydroperoxide (LOOH) concentration over time shows a sigmoidal curvature followed by an acceleration phase that occurs at a LOOH-concentration between 38–50 mmol/kg, here interpreted as a critical LOOH concentration (CCLOOH). We hypothesize that the time at which CCLOOH was reached is related to the onset of aldehyde generation and that the characterization of the LOOH-generation curvature could be based on reaction kinetics in the first days. These hypotheses are tested using semi-empirical models to describe the autocatalytic character of hydroperoxide formation in combination with the CCLOOH. The Foubert function is selected as best describing the LOOH-curvature and is hence used to accurately predict onset of aldehyde generation, in most cases within several days of shelf-life. Furthermore, we find that the defining parameters of this model could be used to recognize antioxidant mechanisms at play.


Sign in / Sign up

Export Citation Format

Share Document