Extended state observer based anti-disturbance tracking control for omnidirectional mobile robots subject to uncertainties and wheel skidding

Author(s):  
Changshun Wang ◽  
Dan Wang ◽  
Zhouhua Peng
2020 ◽  
Vol 17 (2) ◽  
pp. 172988142091177
Author(s):  
Jishu Guo ◽  
Junmei Guo ◽  
Zhongjun Xiao

In this article, a novel robust tracking control scheme based on linear extended state observer with estimation error compensation is proposed for the tracking control of the antagonistic variable stiffness actuator based on equivalent nonlinear torsion spring and the serial variable stiffness actuator based on lever mechanism. For the dynamic models of these two classes of variable stiffness actuators, considering the parametric uncertainties, the unknown friction torques acting on the driving units, the unknown external disturbances acting on the output links and the input saturation constraints, an integral chain pseudo-linear system with input saturation constraints and matched lumped disturbances is established by coordinate transformation. Subsequently, the matched lumped disturbances in the pseudo-linear system are extended to the new system states, and we obtain an extended integral chain pseudo-linear system. Then, we design the linear extended state observer to estimate the unknown states of the extended pseudo-linear system. Considering the input saturation constraints in the extended pseudo-linear system and the estimation errors of the linear extended state observer with fixed preset observation gains, the adaptive input saturation compensation laws and the novel estimation error compensators are designed. Finally, a robust tracking controller based on linear extended state observer, sliding mode control, adaptive input saturation compensation laws, and estimating error compensators is designed to achieve simultaneous position and stiffness tracking control of these two classes of variable stiffness actuators. Under the action of the designed controller, the semi-global uniformly ultimately bounded stability of the closed-loop system is proved by the stability analysis of the candidate Lyapunov function. The simulation results show the effectiveness, robustness, and adaptability of the designed controller in the tracking control of these two classes of variable stiffness actuators. Furthermore, the simulation comparisons show the effectiveness of the proposed estimation error compensation measures in reducing the tracking errors and improving the disturbance rejection performance of the controller.


Energies ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 3305 ◽  
Author(s):  
Gang Wang ◽  
Chenghui Zhou ◽  
Yu Yu ◽  
Xiaoping Liu

When the wheeled mobile robot (WMR) is required to perform specific tasks in complex environment, i.e., on the forestry, wet, icy ground or on the sharp corner, wheel skidding and slipping inevitably occur during trajectory tracking. To improve the trajectory tracking performance of WMR under unknown skidding and slipping condition, an adaptive sliding mode controller (ASMC) design approach based on the extended state observer (ESO) is presented. The skidding and slipping is regarded as external disturbance. In this paper, the ESO is introduced to estimate the lumped disturbance containing the unknown skidding and slipping, parameter variation, parameter uncertainties, etc. By designing a sliding surface based on the disturbance estimation, an adaptive sliding mode tracking control strategy is developed to attenuate the lumped disturbance. Simulation results show that higher precision tracking and better disturbance rejection of ESO-ASMC is realized for linear and circular trajectory than the ASMC scheme. Besides, experimental results indicate the ESO-ASMC scheme is feasible and effective. Therefore, ESO-ASMC scheme can enhance the energy efficiency for the differentially driven WMR under unknown skidding and slipping condition.


Sign in / Sign up

Export Citation Format

Share Document