Catadioptric panoramic vision system has been widely used in many fields, and also plays a very important role in environment perception of unmanned platform especially. However, the resolution of system is not very high, usually less than 5 million pixels at present. Even if the resolution is high, but the unwrapping and rectification of panoramic video is carried out off-line. Further, the system is also applied in stationary state or low stationary moving. This paper proposes an unwrapping and rectification method based on high-resolution catadioptric panoramic vision system used during non-stationary moving. It can segment dynamic circular mark region accurately and get the coordinates of center of circular image real-timely, shorten the time of image processing, meanwhile the coordinates of center and radius of the circular mark region would be obtained, so the image distortion caused by inaccurate center coordinates can be reduced. During image rectification, after achieving radial distortions parameters (K1, K2, K3), decentering distortions parameters (P1, P2), and the correction factor that has no physical meanings, we can used those for fitting the rectification polynomial, so the panoramic video can be rectified without distortion.
Camera and auxiliary sensor calibration for a multispectral panoramic vision system with a distributed aperture
