Automatic and Simultaneous Floorplanning and Placement in Field-Programmable Gate Arrays With Dynamic Partial Reconfiguration Based on Genetic Algorithm

2020 ◽  
Vol 43 (4) ◽  
pp. 224-234
Author(s):  
Ali Sadeghi ◽  
Mina Zolfy Lighvan ◽  
Paolo Prinetto
Keyword(s):  
Genetic Algorithm ◽  
Field Programmable Gate Arrays ◽  
Partial Reconfiguration ◽  
Dynamic Partial Reconfiguration ◽  
Gate Arrays ◽  
Field Programmable ◽  
Programmable Gate Arrays

scholarly journals BPR-TCAM—Block and Partial Reconfiguration based TCAM on Xilinx FPGAs

Electronics ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 353 ◽  
Author(s):  
Anees Ullah ◽  
Ali Zahir ◽  
Noaman A. Khan ◽  
Waleed Ahmad ◽  
Alexis Ramos ◽  
...  
Keyword(s):  
Resource Utilization ◽  
High Speed ◽  
State Of The Art ◽  
Field Programmable Gate Arrays ◽  
Partial Reconfiguration ◽  
Gate Arrays ◽  
Content Addressable Memories ◽  
Field Programmable ◽  
Programmable Gate Arrays

Field Programmable Gate Arrays (FPGAs) based Ternary Content Addressable Memories (TCAMs) are widely used in high-speed networking applications.However, TCAMs are not present on state-of-the-art FPGAs and need to be emulated on SRAM-based memories (i.e., LUTRAMs and Block RAMs) which requires a large amount of FPGA resources. In this paper, we present an efficient methodology to implement FPGA-based TCAMs with significant resource savings compared to existing schemes. The proposed methodology exploits the fracturable nature of Look Up Tables (LUTs) and the built-in slice carry-chains for simultaneous mapping of two rules and its matching logic to a single FPGA slice. Multiple slices can be stacked together to build deeper and wider TCAMs in a modular way. The combination of all these techniques results in significant savings in resource utilization compared to existing approaches.

An Efficient Hardware/Software Communication Mechanism for Reconfigurable NoC

2010 ◽  
pp. 84-109
Author(s):  
Wei-Wen Lin ◽  
Jih-Sheng Shen ◽  
Pao-Ann Hsiung
Keyword(s):  
Shared Memory ◽  
Partial Reconfiguration ◽  
Single Chip ◽  
Dynamic Partial Reconfiguration ◽  
Gate Arrays ◽  
Single Output ◽  
Communication Architectures ◽  
Field Programmable ◽  
Programmable Gate Arrays ◽  
On Chip

With the progress of technology, more and more intellectual properties (IPs) can be integrated into one single chip. The performance bottleneck has shifted from the computation in individual IPs to the communication among IPs. A Network-on-Chip (NoC) was proposed to provide high scalability and parallel communication. An ASIC-implemented NoC lacks flexibility and has a high non-recurring engineering (NRE) cost. As an alternative, we can implement an NoC in a Field Programmable Gate Arrays (FPGA). In addition, FPGA devices can support dynamic partial reconfiguration such that the hardware circuits can be configured into an FPGA at run time when necessary, without interfering hardware circuits that are already running. Such an FPGA-based NoC, namely reconfigurable NoC (RNoC), is more flexible and the NRE cost of FPGA-based NoC is also much lower than that of an ASIC-based NoC. Because of dynamic partial reconfiguration, there are several issues in the RNoC design. We focus on how communication between hardware and software can be made efficient for RNoC. We implement three communication architectures for RNoC namely single output FIFO-based architecture, multiple output FIFO-based architecture, and shared memory-based architecture. The average communication memory overhead is less on the single output FIFO-based architecture and the shared memory-based architecture than on the multiple output FIFO-based architecture when the lifetime interval is smaller than 0.5. In the performance analysis, some real applications are applied. Real application examples show that performance of the multiple output FIFO-based architecture is more efficient by as much as 1.789 times than the performance of the single output FIFO-based architecture. The performance of the shared memory-based architecture is more efficient by as much as 1.748 times than the performance of the single output FIFO-based architecture.

scholarly journals FPGA-Based Controller for a Hybrid Grid-Connected PV/Wind/Battery Power System with AC Load

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2108
Author(s):  
Mohamed Yassine Allani ◽  
Jamel Riahi ◽  
Silvano Vergura ◽  
Abdelkader Mami
Keyword(s):  
Fuzzy Logic ◽  
Hybrid System ◽  
High Voltage ◽  
Field Programmable Gate Arrays ◽  
Energy System ◽  
Maximum Power ◽  
Hybrid Energy ◽  
Gate Arrays ◽  
Field Programmable ◽  
Programmable Gate Arrays

The development and optimization of a hybrid system composed of photovoltaic panels, wind turbines, converters, and batteries connected to the grid, is first presented. To generate the maximum power, two maximum power point tracker controllers based on fuzzy logic are required and a battery controller is used for the regulation of the DC voltage. When the power source varies, a high-voltage supply is incorporated (high gain DC-DC converter controlled by fuzzy logic) to boost the 24 V provided by the DC bus to the inverter voltage of about 400 V and to reduce energy losses to maximize the system performance. The inverter and the LCL filter allow for the integration of this hybrid system with AC loads and the grid. Moreover, a hardware solution for the field programmable gate arrays-based implementation of the controllers is proposed. The combination of these controllers was synthesized using the Integrated Synthesis Environment Design Suite software (Version: 14.7, City: Tunis, Country: Tunisia) and was successfully implemented on Field Programmable Gate Arrays Spartan 3E. The innovative design provides a suitable architecture based on power converters and control strategies that are dedicated to the proposed hybrid system to ensure system reliability. This implementation can provide a high level of flexibility that can facilitate the upgrade of a control system by simply updating or modifying the proposed algorithm running on the field programmable gate arrays board. The simulation results, using Matlab/Simulink (Version: 2016b, City: Tunis, Country: Tunisia, verify the efficiency of the proposed solution when the environmental conditions change. This study focused on the development and optimization of an electrical system control strategy to manage the produced energy and to coordinate the performance of the hybrid energy system. The paper proposes a combined photovoltaic and wind energy system, supported by a battery acting as an energy storage system. In addition, a bi-directional converter charges/discharges the battery, while a high-voltage gain converter connects them to the DC bus. The use of a battery is useful to compensate for the mismatch between the power demanded by the load and the power generated by the hybrid energy systems. The proposed field programmable gate arrays (FPGA)-based controllers ensure a fast time response by making control executable in real time.

Sign in / Sign up

Export Citation Format

Share Document