Dynamic Pre-compensation of Memory Nonlinear Distortion for High-Speed Signal Generator Based on Volterra Inverse

Author(s):  
Jiang Jin ◽  
Juan Peng
Author(s):  
Zhang Yuan ◽  
Xu Xiao-Dong ◽  
Shi Xiao-Feng ◽  
Zhao Zheng-Ping ◽  
Li Heng

2014 ◽  
Vol 749 ◽  
pp. 331-366 ◽  
Author(s):  
W. J. Baars ◽  
C. E. Tinney ◽  
M. S. Wochner ◽  
M. F. Hamilton

AbstractA model is proposed for predicting the presence of cumulative nonlinear distortions in the acoustic waveforms produced by high-speed jet flows. The model relies on the conventional definition of the acoustic shock formation distance and employs an effective Gol’dberg number$\Lambda $for diverging acoustic waves. The latter properly accounts for spherical spreading, whereas the classical Gol’dberg number$\Gamma $is restricted to plane wave applications. Scaling laws are then derived to account for the effects imposed by jet exit conditions of practical interest and includes Mach number, temperature ratio, Strouhal number and an absolute observer distance relative to a broadband Gaussian source. Surveys of the acoustic pressure produced by a laboratory-scale, shock-free and unheated Mach 3 jet are used to support findings of the model. Acoustic waveforms are acquired on a two-dimensional grid extending out to 145 nozzle diameters from the jet exit plane. Various statistical metrics are employed to examine the degree of local and cumulative nonlinearity in the measured waveforms and their temporal derivatives. This includes a wave steepening factor (WSF), skewness, kurtosis and the normalized quadrature spectral density. The analysed data are shown to collapse reasonably well along rays emanating from the post-potential-core region of the jet. An application of the generalized Burgers equation is used to demonstrate the effect of cumulative nonlinear distortion on an arbitrary acoustic waveform produced by a high-convective-Mach-number supersonic jet. It is advocated that cumulative nonlinear distortion effects during far-field sound propagation are too subtle in this range-restricted environment and over the region covered, which may be true for other laboratory-scale jet noise facilities.


2009 ◽  
Vol 44 (10) ◽  
pp. 2722-2732 ◽  
Author(s):  
Antoine Frappe ◽  
Axel Flament ◽  
Bruno Stefanelli ◽  
Andreas Kaiser ◽  
Andreia Cathelin

2015 ◽  
Vol 734 ◽  
pp. 930-934
Author(s):  
Jian Ye Liu ◽  
Jiao Ni

For cable flashover failure, a signal generator design ideas of the NC DC high flash - DC medium voltage flash - low-voltage flash based on three pulse method, consists of three components: the DC source, medium-high pressure unit and low pressure unit. DC source adopts AC 220V power supply, after rectification, chopping booster output. The output of the DC source through an inverter and high-frequency boost get the high-voltage unit. Low unit through the high-speed switching devices and capacitor charging and discharging achieve nanosecond pulse generation. In this paper, the various aspects of the design of the system have made a detailed description and simulation research.


2013 ◽  
Vol 703 ◽  
pp. 278-281
Author(s):  
Yu Wen Zhai ◽  
Gang Liu ◽  
Xiao Yang

The PWM signal generator, in which the DC voltage, sine AC or arbitrary waveform signal can be the base wave to control the duty cycle, is designed in this paper. The high-speed comparator modulates the two signals, one is the base wave signal generated by MSP430F169 and the other one is the PWM modulated wave signal generated by the voltage controlled oscillator, and then generates the PWM signal. The frequency of the PWM signal can be regulated, the frequency and waveform of the base wave can be programmed and the three-phase SPWM signal can be generated. The PWM signal generator can be applied in the field of converting technology in power electronics and electrical automation.


Sign in / Sign up

Export Citation Format

Share Document