An adaptive sliding mode-like P-type iterative learning control for robot manipulators

Author(s):  
Yi Long ◽  
Zhijiang Du ◽  
Weidong Wang
2021 ◽  
Author(s):  
Xinxin Zhang ◽  
Huafeng Ding ◽  
Min Li ◽  
Andrés Kecskeméthy

Abstract In this paper, an iterative learning control (ILC) method based on sliding mode technique is proposed for hybrid force/position control of robot manipulators. Different from traditional ILC, the main purpose of the proposed ILC is to learn the dynamic parameters rather than the control signals. The sliding mode technique is applied to enhance the robustness of the proposed ILC method against external disturbances and noise. The switching gain of the sliding mode term is time-varying and learned by ILC such that the chattering is suppressed effectively compared to traditional sliding mode control (SMC). Simulation studies are performed on a two degrees of freedom planar parallel manipulator. Simulation results demonstrate that the proposed method can achieve higher force/position tracking performance than the traditional SMC and ILC.


2019 ◽  
Vol 52 (15) ◽  
pp. 358-363
Author(s):  
Yu-Hsiu Lee ◽  
Sheng-Chieh Hsu ◽  
Yan-Yi Du ◽  
Jwu-Sheng Hu ◽  
Tsu-Chin Tsao

Algorithms ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 152
Author(s):  
Dongqi Ma ◽  
Hui Lin

To suppress the speed ripple of a permanent magnet synchronous motor in a seeker servo system, we propose an accelerated iterative learning control with an adjustable learning interval. First, according to the error of current iterative learning for the system, we determine the next iterative learning interval and conduct real-time correction on the learning gain. For the learning interval, as the number of iterations increases, the actual interval that needs correction constantly shortens, accelerating the convergence speed. Second, we analyze the specific structure of the controller while applying reasonable assumptions pertaining to its condition. Using the λ-norm, we analyze and apply our mathematical knowledge to obtain a strict mathematical proof on the P-type iterative learning control and obtain the condition of convergence for the controller. Finally, we apply the proposed method for periodic ripple inhibition of the torque rotation speed of the permanent magnet synchronous motor and establish the system model; we use the periodic load torque to simulate the ripple torque of the synchronous motor. The simulation and experimental results indicate the effectiveness of the method.


Author(s):  
J. H. Wu ◽  
H Ding

This paper studies the repetitive motion control of a high-acceleration and high-precision platform driven by linear motors. The control scheme comprises an anticipatory iterative learning control (A-ILC) component and a cascaded control structure including an inner-loop velocity PI controller and an outer-loop position P controller. During the motion process, the cascaded controller remains invariant while the A-ILC adjusts the reference command cycle by cycle to achieve better performance. Experiments are carried out to validate the proposed control structure. The results confirm that the proposed control scheme can improve the system performance significantly in both low-speed trajectory tracking motions and fast point-to-point motion. In the experiments, P-type and D-type ILCs are also utilized to adjust the reference command. Compared with the A type, P-type ILC leads to larger tracking error bounds and D-type ILC lacks a fast convergence rate for low-speed motions, while for fast point-to-point motion these two types of ILC are unable to work well.


Sign in / Sign up

Export Citation Format

Share Document