Improve Service Curve Using Non-overlapped Gate in Time Sensitive Network Switch

Author(s):  
Md Mehedi Hasan ◽  
He Feng ◽  
Shahrukh Khan ◽  
Md Ibrahim Ullah ◽  
Md. Tanvir Hasan ◽  
...  
Keyword(s):  
2022 ◽  
Vol 15 (1) ◽  
pp. 1-31
Author(s):  
Philippos Papaphilippou ◽  
Jiuxi Meng ◽  
Nadeen Gebara ◽  
Wayne Luk

We present Hipernetch, a novel FPGA-based design for performing high-bandwidth network switching. FPGAs have recently become more popular in data centers due to their promising capabilities for a wide range of applications. With the recent surge in transceiver bandwidth, they could further benefit the implementation and refinement of network switches used in data centers. Hipernetch replaces the crossbar with a “combined parallel round-robin arbiter”. Unlike a crossbar, the combined parallel round-robin arbiter is easy to pipeline, and does not require centralised iterative scheduling algorithms that try to fit too many steps in a single or a few FPGA cycles. The result is a network switch implementation on FPGAs operating at a high frequency and with a low port-to-port latency. Our proposed Hipernetch architecture additionally provides a competitive switching performance approaching output-queued crossbar switches. Our implemented Hipernetch designs exhibit a throughput that exceeds 100 Gbps per port for switches of up to 16 ports, reaching an aggregate throughput of around 1.7 Tbps.


2020 ◽  
Vol 38 ◽  
pp. 222-232
Author(s):  
Osamu Takaki ◽  
Ichiro Suzuta ◽  
Kota Torikai ◽  
Yuichiro Saito ◽  
Tsuyoshi Kato ◽  
...  

A "whitelist network switch (WLS)", which can monitor and filter packets based on a whitelist, is particularly effective for stronger information security in closed network environments, such as in factories. This paper focuses on the base network environment for a nurse call system within a large hospital. This network environment is of particular importance to security, and the types of network protocols used are limited. We note important points regarding the practical operation and effectiveness of WLS through two approaches: (i) test introduction into an existing, actual hospital network system; (ii) test introduction in an experimental nurse call system environment.


Water ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1624 ◽  
Author(s):  
Akbari ◽  
Haghighi ◽  
Aghayi ◽  
Javadian ◽  
Tajrishy ◽  
...  

Water management in arid basins often lacks sufficient hydro-climatological data because, e.g., rain gauges are typically absent at high elevations and inflow to ungauged areas around large closed lakes is difficult to estimate. We sought to improve precipitation and runoff estimation in an arid basin (Lake Urmia, Iran) using methods involving assimilation of satellite-based data. We estimated precipitation using interpolation of rain gauge data by kriging, downscaling the Tropical Rainfall Measuring Mission (TRMM), and cokriging interpolation of in-situ records with Remote Sensing (RS)-based data. Using RS-based data application in estimations gave more precise results, by compensating for lack of data at high elevations. Cokriging interpolation of rain gauges by TRMM and Digitized Elevation Model (DEM) gave 4–9 mm lower Root Mean Square Error (RMSE) in different years compared with kriging. Downscaling TRMM improved its accuracy by 14 mm. Using the most accurate precipitation result, we modeled annual direct runoff with Kennessey and Soil Conservation Service Curve Number (SCS-CN) models. These models use land use, permeability, and slope data. In runoff modeling, Kennessey gave higher accuracy. Calibrating Kennessey reduced the Normalized RMSE (NRMSE) from 1 in the standard model to 0.44. Direct runoff coefficient map by 1 km spatial resolution was generated by calibrated Kennessey. Validation by the closest gauges to the lake gave a NRMSE of 0.41 which approved the accuracy of modeling.


Sign in / Sign up

Export Citation Format

Share Document