New efficient hardware design methodology for modified non-restoring square root algorithm

Author(s):  
Atul Rahman ◽  
Abdullah-Al-Kafi
2019 ◽  
Vol 47 (3) ◽  
pp. 292-310 ◽  
Author(s):  
Gerald Oeser

Purpose The square root law (SRL) is a popular model for assessing inventory levels when changing the number of warehouses. Previous empirical research, however, has shown that mostly its underlying assumptions do not hold in practice. This sparks the question how inaccurate the SRL’s results are. The paper aims to discuss this issue. Design/methodology/approach In 26 company cases of reducing the number of warehouses, the estimation error of the SRL is analysed irrespective of its underlying assumptions. Findings The analysis reveals an average estimation error for total inventory of 27.85 per cent (median=27.84 per cent), but a high variability across the cases. The SRL seems to mostly overestimate inventory savings from centralisation and inventory increases from decentralisation. Managers should only use the SRL if inventory depends on the number of warehouses in their situation, i.e. if they use the economic order or production quantity policy and safety factor approach. Suggestions for coping with the SRL’s estimation error are given. Research limitations/implications This paper is based on the 26 cases that could be found in a thorough literature review in the ten most widely spoken languages and that contained or allowed to deduce the necessary information. In order to enable wider generalisations, this sample could be extended. Originality/value Most past research has been more theoretical in nature. This research is the first to investigate the SRL’s estimation error using a variety of company cases and how to cope with this error.


2018 ◽  
Vol 158 ◽  
pp. 123-133 ◽  
Author(s):  
Amit Acharyya ◽  
Pranit N Jadhav ◽  
Valentina Bono ◽  
Koushik Maharatna ◽  
Ganesh R. Naik

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2180
Author(s):  
Nan-Sheng Huang ◽  
Yi-Chung Chen ◽  
Jørgen Christian Larsen ◽  
Poramate Manoonpong

The prediction of a high-level cognitive function based on a proactive brain–machine interface (BMI) control edge device is an emerging technology for improving the quality of life for disabled people. However, maintaining the stability of multiunit neural recordings is made difficult by the nonstationary nature of neurons and can affect the overall performance of proactive BMI control. Thus, it requires regular recalibration to retrain a neural network decoder for proactive control. However, retraining may lead to changes in the network parameters, such as the network topology. In terms of the hardware implementation of the neural decoder for real-time and low-power processing, it takes time to modify or redesign the hardware accelerator. Consequently, handling the engineering change of the low-power hardware design requires substantial human resources and time. To address this design challenge, this work proposes AHEAD: an automatic holistic energy-aware design methodology for multilayer perceptron (MLP) neural network hardware generation in proactive BMI edge devices. By taking a holistic analysis of the proactive BMI design flow, the approach makes judicious use of the intelligent bit-width identification (BWID) and configurable hardware generation, which autonomously integrate to generate the low-power hardware decoder. The proposed AHEAD methodology begins with the trained MLP parameters and golden datasets and produces an efficient hardware design in terms of performance, power, and area (PPA) with the least loss of accuracy. The results show that the proposed methodology is up to a 4X faster in performance, 3X lower in terms of power consumption, and achieves a 5X reduction in area resources, with exact accuracy, compared to floating-point and half-floating-point design on a field-programmable gate array (FPGA), which makes it a promising design methodology for proactive BMI edge devices.


2018 ◽  
Vol 7 (3.4) ◽  
pp. 122 ◽  
Author(s):  
Adam Faroqi ◽  
Adi Fitriadi ◽  
Neni Utami Adiningsih ◽  
Muhammad Ali Ramdhani

The purpose of this research is to design an automatic door control system using media consist of Arduino Uno, SMS Gateway, ultrasonic sensor, relay, accu (batterai), buzzer, and adapter. The design methodology did with several stages: software design, hardware design, system implementation, and system testing. The design results show the system works well for opening and locking doors via SMS Gateway, as well as alerting via SMS when the door opened forcibly.  


Sign in / Sign up

Export Citation Format

Share Document