Computer-aided Design of Receiver Front-end at X band with High Gain, Low Noise Figure and High Dynamic Range

Author(s):  
Mousumi Sarkar ◽  
Sukhendu Bhanja ◽  
Sujit Das ◽  
Arijit Majumder ◽  
Arun Kumar ◽  
...  
Geophysics ◽  
1961 ◽  
Vol 26 (6) ◽  
pp. 820-824 ◽  
Author(s):  
R. E. Warrick ◽  
D. B. Hoover ◽  
W. H. Jackson ◽  
L. C. Pakiser ◽  
J. C. Roller

A new seismic‐refraction system built for the U. S. Geological Survey for crustal studies has been tested in the laboratory and shown to meet strict performance specifications for broad frequency response, low noise, high gain, and high dynamic range. The inherent advantages of magnetic recording, with selective filtering on playback, were demonstrated in field tests by the recovery of weak events that otherwise would be obscured by high seismic noise.


Electronics ◽  
2021 ◽  
Vol 10 (18) ◽  
pp. 2275
Author(s):  
Adriana Lipovac ◽  
Vlatko Lipovac ◽  
Mirza Hamza ◽  
Vedran Batoš

Optical time-domain reflectometer (OTDR) is used to characterize fiber optic links by identifying and localizing various refractive and reflective events such as breaks, splices, and connectors, and measuring insertion/return loss and fiber length. Essentially, OTDR inserts a pulsed signal into the fiber, from which a small portion that is commonly referred to as Rayleigh backscatter, is continuously reflected back with appropriate delays of the reflections expressed as the power loss versus distance, by conveniently scaling the time axis. Specifically, for long-distance events visibility and measurement accuracy, the crucial OTDR attribute is dynamic range, which determines how far downstream the fiber can the strongest transmitted optical pulse reach. As many older-generation but still operable OTDR units have insufficient dynamic range to test the far-end of longer fibers, we propose a simple and cost-effective solution to reactivate such an OTDR by inserting a low-noise high-gain optical preamplifier in front of it to lower the noise figure and thereby the noise floor. Accordingly, we developed an appropriate dynamic range and distance span extension model which provided the exemplar prediction values of 30 dB and 75 km, respectively, for the fiber under test at 1550 nm. These values were found to closely match the dynamic range and distance span extensions obtained for the same values of the relevant parameters of interest by the preliminary practical OTDR measurements conducted with the front-end EDFA optical amplifier, relative to the measurements with the OTDR alone. This preliminary verifies that the proposed concept enables a significantly longer distance span than the OTDR alone. We believe that the preliminary results reported here could serve as a hint and a framework for a more comprehensive test strategy in terms of both test diversification and repeating rate, which can be implemented in a network operator environment or professional lab.


1970 ◽  
Vol 6 (7) ◽  
pp. 202
Author(s):  
J.R. Collard ◽  
A.R. Gobat

Sign in / Sign up

Export Citation Format

Share Document