Smart home system solution with the goal of minimizing water consumption

Author(s):  
Anja Veselinovic ◽  
Srdan Popic ◽  
Zeljko Lukac
2015 ◽  
Vol 738-739 ◽  
pp. 74-78
Author(s):  
Peng Ju Zhang ◽  
Gai Zhi Guo ◽  
Zong Zuo Yu

This paper presents an Embedded Smart Home system solution using wireless sensor network (WSN). The Smart Home system can be sectioned into four parts: wireless sensor network, embedded smart control centre, Server and Client. The major technical of the wireless sensor network is ZigBee. The wireless sensor network includes coordinator node and Sensor node. It is developed based on the Z-Stack protocol stack and the wireless chip CC2530. It is mainly responsible for collecting the environmental parameter of the house and controlling the electrical equipment in the house. It can also support the RFID access control and camera monitor. The control centre communicates with the wireless sensor network by the serial port. It communicates with Server by the TCP socket and transmits data to each client, or communicates with the client by using the wireless communication module directly. Partial hardware electric diagram and software flowchart were provided. Field using indicates that this system is economical and flexible.


2015 ◽  
Vol 738-739 ◽  
pp. 247-250
Author(s):  
Peng Ju Zhang ◽  
Gai Zhi Guo ◽  
Zong Zuo Yu

This paper presents an Embedded Smart Home system solution using the Internet of things. The Smart Home system can be sectioned into four parts: wireless sensor network, embedded smart gateway, Server and Client. The major technical of the wireless sensor network is ZigBee. The wireless sensor network is developed based on the Z-Stack protocol stack and the wireless chip CC2530. Its main work is to sensor the environmental parameter of the house and the automation control of the electrical equipment in the house. It can also support the RFID access control and camera monitor. ARM microprocessor is the core of the Embedded Smart Home control system. It adopts the embedded Linux technology, the development platform is Qt. The gateway communicates with the wireless sensor network by the serial port. It communicates with Server by the TCP socket and transmits to each client, or communicates with the client by using the wireless communication module directly. It also provides the user interface for sensor data check and real time control equipment. The server plays a role of bridge. It is mainly responsible for the communication and big data processing between the client and the control center. Partial hardware electric diagram and software flowchart were provided. Field using indicates that this system is economical and flexible.


2020 ◽  
Vol 0 (6) ◽  
pp. 13-19
Author(s):  
Guzel Gumerova ◽  
Georgiy Gulyuk ◽  
Dmitry Kucher ◽  
Anatoly Shuravilin ◽  
Elena Piven

Data of long-term researches (2015–2018) in southern forest-steppe zone of the Republic of Bashkortostan, is justified theoretically and experimentally the mode of irrigation of potatoes on leached chernozems of unsatisfactory, satisfactory and good ameliorative condition of irrigated lands. For the growing periods of potatoes with different heat and moisture supply, the number of watering, the timing of their implementation, irrigation and irrigation norms are established. On lands with unsatisfactory meliorative state the number of irrigation depending on weather conditions of potato vegetation period varied from 0 to 3 (1.5 on average) with average irrigation norm – 990 m3/ha. With satisfactory meliorative state of lands the number of irrigation on average increased from 0 to 4 (2.3 on average) with irrigation norm – 1305 m3/ha. On lands with good meliorative state the number of irrigation was the highest – from 1 to 5 (3 on average) with average irrigation irrigation norm is 1653 m3/ha. It was noted that in the dry periods of potato vegetation the greatest number of watering was carried out (3–5 watering), and in the wet periods (2017) watering was not carried out except for the area with a good reclamation state, where only one irrigation was carried out by the norm of 550 m3/ha. Water consumption of potato was studied in dynamics as a whole during the growing season and the months of the growing season depending on weather conditions of vegetation period and land reclamation condition of irrigated lands, as well as in the control (without irrigation). The lowest total water consumption was in the area without irrigation and averaged 226.8 mm. In irrigated areas, its values increased to 319-353.4 mm. The average daily water consumption varied from 2.12 to 3.3 mm. The highest rates of potato water consumption were observed in June and July, and the lowest – in May and August. In the total water consumption of potatoes on the site without irrigation, the largest share was occupied by atmospheric precipitation and in addition to them the arrival of moisture from the soil. Irrigation water was used in irrigated areas along with precipitation, the share of which was 30.2–46.1 %.


Author(s):  
J.N. Abedalrahman ◽  
R.J. Mansor ◽  
D.R. Abass

A field experiment was carried out in the field of the College of Agriculture / University of Wasit, located on longitude  45o   50o   33.5o   East and latitude 32o 29o 49.8o North, in Spring season of the agricultural season 2019, in order to estimate the water consumption of potato crop using SWRT technology and under the drip irrigation system. The experiment was designed according to Randomized Complete Block Design (RCBD) with three replications and four treatments that include of the SWRT treatment (the use of plastic films under the plant root area in an engineering style), and the treatment of vegetal fertilizer (using Petmos), organic fertilizer (sheep manure), and the control treatment . Potato tubers (Solanum tuberosum L.)  var. Burin was planted for spring season on 10/2/2019 at the soil depth of 5-10 cm. The highest reference water consumption for the potato crop during the season was calculated by Najeeb Kharufa, which was 663.03 mm. The highest actual water consumption for the potato crop during the season for the control treatment was 410.1 mm. The results showed increase in the values of the crop coefficient (Kc) in the stages of tubers formation and tubers filling stage as compared to the vegetative and ripening stages, ranged from 1.37-1.92 for the two stages of tubers formation and tubers filling. The SWRT treatment gave the highest water use efficiency during the season, was 3.46 kg m-3 .


2020 ◽  
Vol 3 (1) ◽  
pp. 346-353
Author(s):  
Naim Suleyman Tinğ ◽  
Huseyin Ozel ◽  
Lokman Celik ◽  
Enes Ganidagli ◽  
Hilal Akkamis

In this paper, the design and application of smart wheelchair and charging station for disabled citizen is realized. The first stage of the paper is to make the wheelchair used by our disabled citizens able to access smart home technology via the vehicle via touch screen. The ability of citizens with disabilities to call with direct access via touch screen is also in the wheelchair designed. Thanks to the touch screen placed on the vehicle, disabled citizens are provided with the control of smart automation to control many objects such as curtains and doors in the home. In the second part of the paper, a solar powered charging station is designed and installed in order to charge battery powered wheelchairs. In the charging station made a special card reader system and has the charger to charge the card with disabilities to actively and means are provided.


2018 ◽  
Vol 2018 ◽  
pp. 67-67
Author(s):  
Marco Hubert ◽  
◽  
Markus Blut ◽  
Christian Brock ◽  
Ruby Wenjiao Zhang

Sign in / Sign up

Export Citation Format

Share Document