Study of Y-cut LiNbO3 (010) crystal under oscillated vibration at high temperature for energy harvesting in hostile environment

Author(s):  
E.D. Le Boulbar ◽  
C.R. Bowen
2009 ◽  
Vol 48 (9) ◽  
pp. 091406 ◽  
Author(s):  
Vishwas Bedekar ◽  
Josiah Oliver ◽  
Shujun Zhang ◽  
Shashank Priya

Solar Energy ◽  
2021 ◽  
Vol 230 ◽  
pp. 1165-1174
Author(s):  
Yu Qiu ◽  
Pengfei Zhang ◽  
Qing Li ◽  
Yuanting Zhang ◽  
Weihong Li

2015 ◽  
Vol 2015 (HiTEN) ◽  
pp. 000261-000265
Author(s):  
S T Riches ◽  
K Doyle ◽  
N Tebbit ◽  
Y Jia ◽  
A Seshia

Distributed electronics for improving the accuracy of sensing in harsh high temperature environments, such as aero-engine and down-well is a growing field, where reduced power input requirements in cabling and batteries is viewed a key enabler for accelerating the adoption of high temperature electronics. Although batteries are available that can operate up to 200°C, they offer limited life at high temperatures and are bulky, increasing the costs of deployment and maintenance. Cabling also adds weight and takes up space in limited access applications. Energy harvesting in-situ offers the opportunity to make a step change in the design of high temperature electronics modules and in expanding their possible range of applications; for example, in sensor systems for combustor and turbine monitoring in aero-engines. This paper covers an assessment of MEMS vibration energy harvesting technology for high temperature sensing applications. MEMS devices based on the principle of parametric resonance, using AlN on Silicon have been designed and fabricated, along with sourcing of high temperature components for rectification, impedance matching and energy storage. The MEMS devices have been packaged into ceramic chip carriers and measured for energy output from a random vibration profile representative of an aerospace application. The measured output from the MEMS vibration energy harvester is capable of providing sufficient power to be of interest for autonomous sensing applications. This paper reports on the performance of the MEMS vibration energy harvesting devices and their associated circuitry at room temperature and at temperatures of up to 150°C. The challenges remaining to develop robust energy harvesting devices that could be applied in aero-engine, down-well and other high temperature applications are described. This work has been carried out under the Innovate UK supported project HI-VIBE, in a collaboration between GE Aviation Systems – Newmarket and the University of Cambridge.


2007 ◽  
Vol 1044 ◽  
Author(s):  
Otto J. Gregory ◽  
Ximing Chen ◽  
Gustave C. Fralick ◽  
John Wrbanek

AbstractThermoelectric devices based on “n-type” oxide semiconductors and metal/oxide nanocomposites are being considered for high temperature thermocouples, heat flux sensors and energy harvesting devices. In terms of energy harvesting, preliminary 2D thermoelectric calculations indicated that enough electrical energy can be generated from the large thermal gradients that exist within a gas turbine engine to power active wireless devices. Several promising bi-ceramic junctions based on this concept were investigated in terms of their high temperature thermoelectric properties. The most promising bi-ceramic junction was based on indium tin oxide (ITO) and a NiCrCoAlY/alumina nanocomposite. The thermoelectric responses of these individual elements were evaluated relative to a platinum reference electrode. A maximum emf of 77 mV was achieved for a NiCrCoAlY/alumina nanocomposite/platinum thermocouple for an imposed temperature gradient of 1111 °C. The thermoelectric power for this couple was 78 μV/°C. When this NiCrCoAlY/alumina nanocomposite was combined with ITO to form a bi-ceramic junction, thermoelectric powers on the order of 700 μV/°C were obtained. A maximum electromotive force of 291mV was achieved for a hot junction temperature of 1100 °C. The thermoelectric response after repeated thermal cycling to 1200 °C was both repeatable and reproducible. The ITO was prepared in varying nitrogen, oxygen and argon partial pressures, which was used to control the charge carrier concentration, stability and thermoelectric response of the bi-ceramic junctions. The thermoelectric response decreased with increasing nitrogen partial pressure and increased with oxygen partial pressure in the plasma with the argon partial pressure constant. The relationship between the sputtering parameters and thermoelectric properties was investigated and the application of these bi-ceramic junctions as thermocouples and energy harvesting devices is discussed.


1980 ◽  
Author(s):  
Byron B. Brenden ◽  
John S. Hartman ◽  
Frederich R. Reich

2019 ◽  
Vol 137 (23) ◽  
pp. 48790 ◽  
Author(s):  
Clara Lagomarsini ◽  
Claire Jean‐Mistral ◽  
Achraf Kachroudi ◽  
Stéphane Monfray ◽  
Alain Sylvestre

2017 ◽  
Vol 46 (4) ◽  
pp. 2419-2431 ◽  
Author(s):  
Ashwin Rao ◽  
Gregg Bosak ◽  
Binay Joshi ◽  
Jennifer Keane ◽  
Luke Nally ◽  
...  

1989 ◽  
Vol 208 ◽  
pp. 25-43 ◽  
Author(s):  
Ronald Smith

Measurements of the rapidly changing gaseous composition in engines at low speed can be made via narrow tubes which convey the gases to monitoring equipment in a less hostile environment. This paper quantifies the extent to which the tube smooths out any changes in concentration. Exact (and approximate) formulae are derived for the temporal variance as weighted double (and single) integrals of the steady flow properties along the tube. Such is the non-uniformity that typically the region near the engine contributes 100 times as much to the spreading as does the region near the monitoring equipment. The advantages of keeping the sampling tubes short and heated are made explicit.


Sign in / Sign up

Export Citation Format

Share Document