Visual Servo Feedback Control of a Novel Large Working Range Micro Manipulation System for Microassembly

2014 ◽  
Vol 23 (1) ◽  
pp. 181-190 ◽  
Author(s):  
Shunli Xiao ◽  
Yangmin Li
2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Huangsheng Xie ◽  
Guodong Li ◽  
Yuexin Wang ◽  
Zhihe Fu ◽  
Fengyu Zhou

This paper focuses on the problem of visual servo grasping of household objects for nonholonomic mobile manipulator. Firstly, a new kind of artificial object mark based on QR (Quick Response) Code is designed, which can be affixed to the surface of household objects. Secondly, after summarizing the vision-based autonomous mobile manipulation system as a generalized manipulator, the generalized manipulator’s kinematic model is established, the analytical inverse kinematic solutions of the generalized manipulator are acquired, and a novel active vision based camera calibration method is proposed to determine the hand-eye relationship. Finally, a visual servo switching control law is designed to control the service robot to finish object grasping operation. Experimental results show that QR Code-based artificial object mark can overcome the difficulties brought by household objects’ variety and operation complexity, and the proposed visual servo scheme makes it possible for service robot to grasp and deliver objects efficiently.


Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 267
Author(s):  
Timotei Lala ◽  
Darius-Pavel Chirla ◽  
Mircea-Bogdan Radac

This paper focuses on validating a model-free Value Iteration Reinforcement Learning (MFVI-RL) control solution on a visual servo tracking system in a comprehensive manner starting from theoretical convergence analysis to detailed hardware and software implementation. Learning is based on a virtual state representation reconstructed from input-output (I/O) system samples under nonlinear observability and unknown dynamics assumptions, while the goal is to ensure linear output reference model (ORM) tracking. Secondary, a competitive model-free Virtual State-Feedback Reference Tuning (VSFRT) is learned from the same I/O data using the same virtual state representation, demonstrating the framework’s learning capability. A model-based two degrees-of-freedom (2DOF) output feedback controller serving as a comparisons baseline is designed and tuned using an identified system model. With similar complexity and linear controller structure, MFVI-RL is shown to be superior, confirming that the model-based design issue of poor identified system model and control performance degradation can be solved in a direct data-driven style. Apart from establishing a formal connection between output feedback control, state feedback control and also between classical control and artificial intelligence methods, the results also point out several practical trade-offs, such as I/O data exploration quality and control performance leverage with data volume, control goal and controller complexity.


Author(s):  
Ghananeel Rotithor ◽  
Ashwin P. Dani

Abstract Combining perception feedback control with learning-based open-loop motion generation for the robot’s end-effector control is an attractive solution for many robotic manufacturing tasks. For instance, while performing a peg-in-the-hole or an insertion task when the hole or the recipient part is not visible in the eye-in-the-hand camera, an open-loop learning-based motion primitive method can be used to generate end-effector path. Once the recipient part is in the field of view (FOV), visual servo control can be used to control the motion of the robot. Inspired by such applications, this paper presents a control scheme that switches between Dynamic Movement Primitives (DMPs) and Image-based Visual Servo (IBVS) control combining end-effector control with perception-based feedback control. A simulation result is performed that switches the controller between DMP and IBVS to verify the performance of the proposed control methodology.


2013 ◽  
Vol 37 (3) ◽  
pp. 571-580
Author(s):  
Chen Hung I ◽  
Shih Ming Chang

In this paper, the pneumatic driven manipulation system is driven by the pneumatic cylinders. The proposed system is built by the designed pneumatic force control system and the microscope, which are integrated with the control interface. Visual C++ code from MFC is used to finish the control interface. A self tuning fuzzy controller with a dead zone compensator is designed to improve the force precision of the proposed system. From experimental results, the force error can be controlled within ±1 mN and the position error can be stayed within ±1 pixel using the visual servo.


Sensors ◽  
2016 ◽  
Vol 16 (9) ◽  
pp. 1479 ◽  
Author(s):  
Zhan Yang ◽  
Yaqiong Wang ◽  
Bin Yang ◽  
Guanghui Li ◽  
Tao Chen ◽  
...  

2013 ◽  
Vol 01 (01) ◽  
pp. 143-162 ◽  
Author(s):  
Haoxiang Lang ◽  
Muhammad Tahir Khan ◽  
Kok-Kiong Tan ◽  
Clarence W. de Silva

A new trend in mobile robotics is to integrate visual information in feedback control for facilitating autonomous grasping and manipulation. The result is a visual servo system, which is quite beneficial in autonomous mobile manipulation. In view of mobility, it has wider application than the traditional visual servoing in manipulators with fixed base. In this paper, the state of art of vision-guided robotic applications is presented along with the associated hardware. Next, two classical approaches of visual servoing: image-based visual servoing (IBVS) and position-based visual servoing (PBVS) are reviewed; and their advantages and drawbacks in applying to a mobile manipulation system are discussed. A general concept of modeling a visual servo system is demonstrated. Some challenges in developing visual servo systems are discussed. Finally, a practical application of mobile manipulation system which is developed for applications of search and rescue and homecare robotics is introduced.


Sign in / Sign up

Export Citation Format

Share Document