A high efficiency passive power factor corrector for single-phase bridge diode rectifiers

Author(s):  
R. Carbone ◽  
A. Scappatura
2012 ◽  
Vol 433-440 ◽  
pp. 5549-5555
Author(s):  
Yun Tao Yue ◽  
Yan Lin

A novel scheme of low power communication power supply with high power factor and soft-switching is presented, a power factor corrector and dc/dc converter of passive lossless soft-switching is based on a ML4803 IC control. DC/DC converter introduces a novel two-transistor forward soft-switching technique, which realizes zero-voltage turn-on and turn-off, with no additional switches. a communication power supply module is developed in this paper. It has the characteristics of rapid dynamic response, high power factor, high efficiency and small bulk ect.


2013 ◽  
Vol 3 (1) ◽  
pp. 5-11 ◽  
Author(s):  
Yuriy Denisov ◽  
Serhii Stepenko

Abstract The problems, devoted to power quality and particularly power factor correction, are of great importance nowadays. The key requirements, which should be satisfied according to the energy efficiency paradigm, are not limited only by high quality of the output voltage (low total harmonic distortion), but also assume minimal power losses (high efficiency) in the power factor corrector (PFC). It could be satisfied by the use of quasi-resonant pulse converter (QRPC) due to its high efficiency at high switching frequency instead of the classical pulse-width modulated (PWM) boost converter. A dynamic model of QRPC with zero current switching (ZCS) is proposed. This model takes into account the main features of QRPC-ZCS as a link of a PFC closed-loop system (discreteness, sharp changes of parameters over switching period, input voltage impact on the gain). The synthesized model is also valid for conventional parallel pulse converter over an active interval of commutation. The regulator for current loop of PFC was synthesized based on digital filter using proposed model by the criterion of fast acting.


Author(s):  
Tomas A. Gonzalez ◽  
Daniel O. Mercuri ◽  
Hernan E. Tacca ◽  
Maximo E. Pupareli

Modern dc power supplies provide power factor correction but the classical two-stage approach, using hard-switched preregulators, has detrimental effects on efficiency and reliability, particularly for high power applications. With some circuit modifications and the addition of a few magnetic components, diodes and capacitors, we have turned a classical boost power factor corrector into a high efficiency soft-switched version. The proposed converter turns on its single switch with zero current and turns it off with zero voltage. In this paper we explain the proposed changes, we study the waveforms and equations and we verify them with an experimental prototype. We also show how the converter can be used for modular single- and three-phase high power applications.<br /><br />


Sign in / Sign up

Export Citation Format

Share Document