A real-time smart charging station for EVs designed for V2G scenario and its coordination with renewable energy sources

Author(s):  
Mukesh Singh ◽  
Praveen Kumar ◽  
Indrani Kar ◽  
Neeraj Kumar
Water ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1508 ◽  
Author(s):  
Rafael González Perea ◽  
Aida Mérida García ◽  
Irene Fernández García ◽  
Emilio Camacho Poyato ◽  
Pilar Montesinos ◽  
...  

Climate change, water scarcity and higher energy requirements and electric tariff compromises the continuity of the irrigated agriculture. Precision agriculture (PA) or renewable energy sources which are based on communication and information technologies and a large amount of data are key to ensuring this economic activity and guaranteeing food security at the global level. Several works which are based on the use of PA and renewable energy sources have been developed in order to optimize different variables of irrigated agriculture such as irrigation scheduling. However, the large amount of technologies and sensors that these models need to be implemented are still far from being easily accessible and usable by farmers. In this way, a middleware called Real time Smart Solar Irrigation Manager (RESSIM) has been developed in this work and implemented in MATLABTM with the aim to provide to farmers a user-friendly tool for the daily making decision process of irrigation scheduling using a smart photovoltaic irrigation management module. RESSIM middleware was successfully tested in a real field during a full irrigation season of olive trees using a real smart photovoltaic irrigation system.


Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4240 ◽  
Author(s):  
Khairy Sayed ◽  
Ahmed G. Abo-Khalil ◽  
Ali S. Alghamdi

This paper introduces an energy management and control method for DC microgrid supplying electric vehicles (EV) charging station. An Energy Management System (EMS) is developed to manage and control power flow from renewable energy sources to EVs through DC microgrid. An integrated approach for controlling DC microgrid based charging station powered by intermittent renewable energies. A wind turbine (WT) and solar photovoltaic (PV) arrays are integrated into the studied DC microgrid to replace energy from fossil fuel and decrease pollution from carbon emissions. Due to the intermittency of solar and wind generation, the output powers of PV and WT are not guaranteed. For this reason, the capacities of WT, solar PV panels, and the battery system are considered decision parameters to be optimized. The optimized design of the renewable energy system is done to ensure sufficient electricity supply to the EV charging station. Moreover, various renewable energy technologies for supplying EV charging stations to improve their performance are investigated. To evaluate the performance of the used control strategies, simulation is carried out in MATLAB/SIMULINK.


Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2193 ◽  
Author(s):  
Dominik Dominković ◽  
Greg Stark ◽  
Bri-Mathias Hodge ◽  
Allan Pedersen

Although it can be complex to integrate variable renewable energy sources such as wind power and photovoltaics into an energy system, the potential benefits are large, as it can help reduce fuel imports, balance the trade, and mitigate the negative impacts in terms of climate change. In order to try to integrate a very large share of variable renewable energy sources into the energy system, an integrated energy planning approach was used, including ice storage in the cooling sector, a smart charging option in the transport sector, and an excess capacity of reverse osmosis technology that was utilised in order to provide flexibility to the energy system. A unit commitment and economic dispatch tool (PLEXOS) was used, and the model was run with both 5 min and 1 h time resolutions. The case study was carried out for a typical Caribbean island nation, based on data derived from measured data from Aruba. The results showed that 78.1% of the final electricity demand in 2020 was met by variable renewable energy sources, having 1.0% of curtailed energy in the energy system. The total economic cost of the modelled energy system was similar to the current energy system, dominated by the fossil fuel imports. The results are relevant for many populated islands and island nations.


2018 ◽  
Vol 55 (2) ◽  
pp. 3-10
Author(s):  
A. Obushevs ◽  
A. Mutule

Abstract The paper focuses on the application of synchrophasor measurements that present unprecedented benefits compared to SCADA systems in order to facilitate the successful transformation of the Nordic-Baltic-and-European electric power system to operate with large amounts of renewable energy sources and improve situational awareness of the power system. The article describes new functionalities of visualisation tools to estimate a grid inertia level in real time with monitoring results between Nordic and Baltic power systems.


Sign in / Sign up

Export Citation Format

Share Document