Decay of Electrostatic Force of Dust Particles on Photovoltaic Modules

ABSTRACTIn rf silane plasmas, growing process and behavior of dust particles and presence of negative ions are studied by square-wave-amplitude-modulating an rf discharge voltage. By combining the rf modulation method with Mie scattering methods, particle behavior together with temporal evolutions of particle size and density is revealed. While the rf modulation is effective for the suppression of particle growth, small particles are found to exist still in the discharge space for a larger duty cycle. Further, particles seem to be suspended around an rf electrode by counter balance between an electrostatic force due to time-averaged sheath electric field and a force increasing with particle size. The development of particle growth also affects the rf discharge itself, resulting in inhomogeneity of film properties. Negative ion detection is carried out as a first step for studying whether they cause the particle formation. It is found that negative ions are formed in rf silane discharges even for a low concentration of 0.5%SiH4 and their formation is due to attachment to dissociated radicals rather than dissociative attachment of SiH4.

Download Full-text

Reduced output of photovoltaic modules due to different types of dust particles

Journal of Cleaner Production ◽

10.1016/j.jclepro.2020.124317 ◽

2021 ◽

Vol 280 ◽

pp. 124317

Author(s):

Zeki Ahmed Darwish ◽

Kamaruzzaman Sopian ◽

Ahmad Fudholi

Keyword(s):

Dust Particles ◽

Photovoltaic Modules ◽

Different Types

Download Full-text

Strong Attraction and Adhesion Forces of Dust Particles by System Voltages of Photovoltaic Modules

IEEE Journal of Photovoltaics ◽

10.1109/jphotov.2019.2907174 ◽

2019 ◽

Vol 9 (4) ◽

pp. 1121-1127 ◽

Cited By ~ 4

Author(s):

Chun-Sheng Jiang ◽

Helio R. Moutinho ◽

B. To ◽

Chuanxiao Xiao ◽

Craig Perkins ◽

...

Keyword(s):

Dust Particles ◽

Adhesion Forces ◽

Photovoltaic Modules ◽

Strong Attraction

Download Full-text

In Situ Observation of Growing Process of Particles in Silane Plasmas and Their Effects on Amorphous Silicon Deposition

MRS Proceedings ◽

10.1557/proc-236-301 ◽

1991 ◽

Vol 236 ◽

Cited By ~ 2

Author(s):

Masaharu Shiratani ◽

Yukio Watanabe

Keyword(s):

Particle Size ◽

Electrostatic Force ◽

Negative Ions ◽

Particle Growth ◽

Mie Scattering ◽

Negative Ion ◽

Dust Particles ◽

Modulation Method ◽

Rf Discharge ◽

In Situ Observation

AbstractIn rf silane plasmas, growing process and behavior of dust particles and presence of negative ions are studied by square-wave-amplitude-modulating an rf discharge voltage. By combining the rf modulation method with Mie scattering methods, particle behavior together with temporal evolutions of particle size and density is revealed. While the rf modulation is effective for the suppression of particle growth, small particles are found to exist still in the discharge space for a larger duty cycle. Further, particles seem to be suspended around an rf electrode by counter balance between an electrostatic force due to time-averaged sheath electric field and a force increasing with particle size. The development of particle growth also affects the rf discharge itself, resulting in inhomogeneity of film properties. Negative ion detection is carried out as a first step for studying whether they cause the particle formation. It is found that negative ions are formed in rf silane discharges even for a low concentration of 0.5%SiH4 and their formation is due to attachment to dissociated radicals rather than dissociative attachment of SiH4.

Download Full-text

Saturn's E, G and F rings: modulated by the plasma sheet

International Astronomical Union Colloquium ◽

10.1017/s0252921100101666 ◽

1984 ◽

Vol 75 ◽

pp. 597

Author(s):

E. Grün ◽

G.E. Morfill ◽

T.V. Johnson ◽

G.H. Schwehm

Keyword(s):

Solar Wind ◽

Direct Contact ◽

Transport Processes ◽

Time Variable ◽

Dust Particles ◽

Spatial Diffusion ◽

Drag Forces ◽

Orbit Perturbation ◽

Time Variations ◽

F Ring

ABSTRACTSaturn's broad E ring, the narrow G ring and the structured and apparently time variable F ring(s), contain many micron and sub-micron sized particles, which make up the “visible” component. These rings (or ring systems) are in direct contact with magnetospheric plasma. Fluctuations in the plasma density and/or mean energy, due to magnetospheric and solar wind processes, may induce stochastic charge variations on the dust particles, which in turn lead to an orbit perturbation and spatial diffusion. It is suggested that the extent of the E ring and the braided, kinky structure of certain portions of the F rings as well as possible time variations are a result of plasma induced electromagnetic perturbations and drag forces. The G ring, in this scenario, requires some form of shepherding and should be akin to the F ring in structure. Sputtering of micron-sized dust particles in the E ring by magnetospheric ions yields lifetimes of 102to 104years. This effect as well as the plasma induced transport processes require an active source for the E ring, probably Enceladus.

Download Full-text

Analytical Electron Microscopy Characterization of Electric Arc Furnace Dust

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100097326 ◽

1981 ◽

Vol 39 ◽

pp. 134-135

Author(s):

J. R. Porter ◽

J. I. Goldstein ◽

D. B. Williams

Keyword(s):

Electron Microscopy ◽

Analytical Electron Microscopy ◽

Electric Arc Furnace ◽

Electric Arc ◽

Dust Particles ◽

Particle Analysis ◽

Arc Furnace ◽

Analytical Electron ◽

Residual Elements ◽

Industry Practice

Alloy scrap metal is increasingly being used in electric arc furnace (EAF) steelmaking and the alloying elements are also found in the resulting dust. A comprehensive characterization program of EAF dust has been undertaken in collaboration with the steel industry and AISI. Samples have been collected from the furnaces of 28 steel companies representing the broad spectrum of industry practice. The program aims to develop an understanding of the mechanisms of formation so that procedures to recover residual elements or recycle the dust can be established. The multi-phase, multi-component dust particles are amenable to individual particle analysis using modern analytical electron microscopy (AEM) methods.Particles are ultrasonically dispersed and subsequently supported on carbon coated formvar films on berylium grids for microscopy. The specimens require careful treatment to prevent agglomeration during preparation which occurs as a result of the combined effects of the fine particle size and particle magnetism. A number of approaches to inhibit agglomeration are currently being evaluated including dispersal in easily sublimable organic solids and size fractioning by centrifugation.

Download Full-text

Improving soil remediation through characterization

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100138300 ◽

1995 ◽

Vol 53 ◽

pp. 386-387

Author(s):

E. C. Buck ◽

N. L. Dietz ◽

J. K. Bates

Keyword(s):

Dust Particles ◽

Radiochemical Analysis ◽

Solid Product ◽

Uranium Contamination ◽

Physical Separation ◽

X Ray ◽

Rocky Flats ◽

Remediation Strategies ◽

Bearing Materials ◽

X Ray Absorption

Operations at former weapons processing facilities in the U. S. have resulted in a large volume of radionuclidecontaminated soils and residues. In an effort to improve remediation strategies and meet environmental regulations, radionuclide-bearing particles in contaminant soils from Fernald in Ohio and the Rocky Flats Plant (RFP) in Colorado have been characterized by electron microscopy. The object of these studies was to determine the form of the contaminant radionuclide, so that it properties could be established [1]. Physical separation and radiochemical analysis determined that uranium contamination at Fernald was not present exclusively in any one size/density fraction [2]. The uranium-contamination resulted from aqueous and solid product spills, air-borne dust particles, and from the operation of an incinerator on site. At RFP the contamination was from the incineration of Pu-bearing materials. Further analysis by x-ray absorption spectroscopy indicated that the majority of the uranium was in the 6+ oxidation state [3].

Download Full-text