Power Quality Control of Small Hydro-PV Array and Battery Storage Based Microgrid for Rural Areas

Author(s):  
Shailendra Kumar ◽  
Bhim Singh ◽  
Ujjwal Kalla ◽  
Sanjeev Singh ◽  
Arvind Mittal
2013 ◽  
Vol 694-697 ◽  
pp. 838-841 ◽  
Author(s):  
Li Xia Lv ◽  
Yue Xia Jin

In order to solve the problems which are caused by wind power and solar power on-grid, such as power quality, stability, reliability and so on, this paper proposes wind and solar micro-grid including energy storage system(ESS). The micro-grid uses two buses: AC bus and DC bus. Micro-source current is connected to the grid with the same inverter, which can reduce the micro-grid control difficulties. The energy storage system connected to the grid through the inverter could directly absorb energy from the grid. The DC side of the energy storage system using bidirectional DC / DC converter, which can keep the DC side of the battery storage stable.


2020 ◽  
Vol 10 (6) ◽  
pp. 2161
Author(s):  
Mathhar Bdour ◽  
Zakariya Dalala ◽  
Mohammad Al-Addous ◽  
Atef Kharabsheh ◽  
Hadi Khzouz

Brackish water desalination is widely used to supply fresh water; reverse osmosis (RO) desalination units are considered as the most widespread technology used for this purpose due to the advantage of low power consumption. On the other hand, renewable energy resource integration into the power systems is an important trend, which serves energy supply especially in rural areas and non-stable power supply places. RO units powered from Photovoltaic (PV) systems are considered one of the reliable solutions in places where both water and energy demands are issues to be improved. In this research, the idea of storing energy in water salinity is introduced and discussed to reduce conventional battery storage banks. This concept depends on changing the pressure of the RO unit based on solar profiles to get high distilled water at high solar radiation times (high pressure applied) and low distilled water at low radiation times (low pressure values). Then, the produced water is mixed to get an acceptable salinity in the produced water. This research was applied on a small-scale RO testing unit with a pressure that changed from 40 to 60 bar, and, as a result, the water conductivity changed from 1.7 to 1.1 mS/cm. This was the base line to investigate the possibility of curtailing the battery storage system of the selected plant. Following the variable pressure scenarios, energy storage capacity was reduced by a factor of 20%.


Sign in / Sign up

Export Citation Format

Share Document