scholarly journals On the Theoretical Maximum Directivity of a Radiating Aperture From Modal Field Expansions

2019 ◽  
Vol 67 (4) ◽  
pp. 2781-2786 ◽  
Author(s):  
Lucas Polo-Lopez ◽  
Juan Corcoles ◽  
Jorge A. Ruiz-Cruz ◽  
Jose R. Montejo-Garai ◽  
Jesus M. Rebollar
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Seyyed Mohammad Mehdi Moshiri ◽  
Najmeh Nozhat

AbstractIn this paper, an optical smart multibeam cross dipole nano-antenna has been proposed by combining the absorption characteristic of graphene and applying different arrangements of directors. By introducing a cross dipole nano-antenna with two V-shaped coupled elements, the maximum directivity of 8.79 dBi has been obtained for unidirectional radiation pattern. Also, by applying various arrangements of circular sectors as director, different types of radiation pattern such as bi- and quad-directional have been attained with directivities of 8.63 and 8.42 dBi, respectively, at the wavelength of 1550 nm. The maximum absorption power of graphene can be tuned by choosing an appropriate chemical potential. Therefore, the radiation beam of the proposed multibeam cross dipole nano-antenna has been controlled dynamically by applying a monolayer graphene. By choosing a suitable chemical potential of graphene for each arm of the suggested cross dipole nano-antenna without the director, the unidirectional radiation pattern shifts ± 13° at the wavelength of 1550 nm. Also, for the multibeam nano-antenna with different arrangements of directors, the bi- and quad-directional radiation patterns have been smartly modified to uni- and bi-directional ones with the directivities of 10.1 and 9.54 dBi, respectively. It is because of the graphene performance as an absorptive or transparent element for different chemical potentials. This feature helps us to create a multipath wireless link with the capability to control the accessibility of each receiver.


2013 ◽  
Vol 718-720 ◽  
pp. 1673-1676
Author(s):  
Yun Chao Wang ◽  
Wen Jie Pang ◽  
Mei Zhou

Digging performances of excavator is a key important index for evaluation of excavator. It is a very complex and heavy work to compute digging performance of excavator. So a compact hydraulic excavator model was built by ADAMS software. The theoretical maximum tool force of excavator was analyzed. For bucket digging mode, the maximum tool force were analyzed for boom cylinder seven positions during the whole working range and the effect of different factors were discussed. The practical maximum tool force was gained. The actual tool force variations were found through the analysis of simulation results. It provides the basis for design and improvement of excavator.


1973 ◽  
Vol 51 (19) ◽  
pp. 2114-2117
Author(s):  
K. O. Hill ◽  
C. K. Campbell

The integral equation is derived for the steady-state modal-field distributions in a circular plane-mirror laser interferometer containing a symmetrically positioned angular-limiting device. It is shown that this equation reduces to the corresponding Fox and Li formulation in the limit when the aperture is fully opened.


Physics World ◽  
2021 ◽  
Vol 34 (10) ◽  
pp. 25v-25v
Author(s):  
Chris Atkins

In response to the Lateral Thoughts quiz “Sporting chance”, in which question 8 asked for a rough estimate of the theoretical maximum height a pole vaulter could jump, and why the actual world record is slightly above this.


2021 ◽  
Author(s):  
Prantik Dutta ◽  
Arun Gande ◽  
Gopi Ram

In this letter, a non-reciprocal filter with enhanced directivity is analyzed methodically and the filter parameters are optimized using an evolutionary algorithm. The return loss, insertion loss, and isolation characteristics of the filter exhibit a trade-off that makes manual tuning a trial-and-error method. The veracity of the numerical modeling is conformed by designing a 150 MHz lumped element non-reciprocal bandpass filter based on the parameters extracted using an evolutionary algorithm based particle swarm optimization (PSO). The simulated and measured results comply well with the modeling and the results exhibit maximum directivity of 28.2 dB without degradation in insertion loss (1.1 dB) and return loss (16.2 dB) within the passband. The algorithm can be utilized in designing non-reciprocal filters having different center frequencies and bandwidths.


Sign in / Sign up

Export Citation Format

Share Document