Physical layer implementation of orthogonal frequency division multiplexing for software defined radio on FPGA

Author(s):  
Maria Katrina D. Guevara ◽  
Ivan Kenneth A. Wang ◽  
Rhandley D. Cajote ◽  
Romarie U. Lorenzo
2005 ◽  
Vol 14 (03) ◽  
pp. 631-651
Author(s):  
ARISTODEMOS PNEVMATIKAKIS ◽  
SPYROS BLIONAS ◽  
DIMITRIS TRIANTIS

The base-band section of a modem employing Orthogonal Frequency Division Multiplexing (OFDM) is described in this paper. It utilizes the necessary algorithms to combat distortion due to the channel conditions and imperfect synchronization. A model describing these distortions is used to derive the algorithms. The system is realized in a prototype platform for the HIPERLAN/2 standard, but modifications for compliance to other broadband digital broadcasting and wireless networking OFDM systems are proposed. The performance of the prototype base-band modem is described.


Author(s):  
Guilherme P. Aquino ◽  
Luciano L. Mendes

Abstract Recent advances in the communication systems culminated in a new class of multiple access schemes, named non-orthogonal multiple access (NOMA), where the main goal is to increase the spectrum efficiency by overlapping data from different users in a single time-frequency resource used by the physical layer. NOMA receivers can resolve the interference among data symbols from different users, increasing the overall system spectrum efficiency without introducing symbol error rate (SER) performance loss, which makes this class of multiple access techniques interesting for future mobile communication systems. This paper analyzes one promising NOMA technique, called sparse code multiple access (SCMA), where C users can share U<C time-frequency resources from the physical layer. Initially, the SCMA and orthogonal frequency division multiplexing (OFDM) integration is considered, defining a benchmark for the overall SER performance for the multiple access technique. Furthermore, this paper proposes the SCMA and generalized frequency division multiplexing (GFDM) integration. Since GFDM is a highly flexible non-orthogonal waveform that can mimic several other waveforms as corner cases, it is an interesting candidate for future wireless communication systems. This paper proposes two approaches for combining SCMA and GFDM. The first one combines a soft equalizer, called block expectation propagation (BEP), and a multi-user detection (MUD) scheme based on the sum-product algorithm (SPA). This approach achieves the best SER performance, but with the significant increment of the complexity at the receiver. In the second approach, BEP is integrated with a simplified MUD, which is an original contribution of this paper, aiming for reducing the receiver’s complexity at the cost of SER performance loss. The solutions proposed in this paper show that SCMA-GFDM can be an interesting solution for future mobile networks.


2018 ◽  
Vol 1 (2) ◽  
pp. 282-292
Author(s):  
Daniel Ricardo Pérez-Riaño ◽  
Elkin Andrés Ducuara-Hernández ◽  
Luis Fernando Pedraza-Martínez

In this paper the performance of a Generalized Frequency Division Multiplexing waveform is evaluated when compared to an Orthogonal Frequency Division Multiplexing signal. For the development of the previous waveforms, the GNU radio software and the Software Defined Radio (SDR) equipment USRP N210 are used. Through a spectrum analyzer the power of both waveforms are measured and the Out-of-Band Radiation is analyzed. Then, the results obtained are compared and the advantages and disadvantages of the implementation of GFDM as a waveform within the fifth generation systems are exposed.


2021 ◽  
Vol 20 ◽  
pp. 68-80
Author(s):  
Dia Mohamad Ali ◽  
Zhraa Zuheir Yahya

Filtered-orthogonal frequency division multiplexing (F-OFDM) is a quasi-orthogonal waveform candidate for the applications of the fifth generation (5G) communication system. In this study, an F-OFDM waveform with unequal sub-band sizes is proposed to improve the spectrum efficiency (SE) of the 5G system. The proposed waveform is modeled with the Blackman window-sinc filter and is developed based on the software-defined radio (SDR) technology for practical implementation. The result shows that the F-OFDM performance of the simulation and hardware implementation is approximately the same. The SE using the proposed F-OFDM waveform is 6% and 5.8% higher than the SE using the conventional OFDM waveform under the simulation in the LabVIEW NXG simulator and under the practical use in the universal software radio peripheral (USRP) platform, respectively.


2019 ◽  
Vol 4 (1) ◽  
pp. 64-69
Author(s):  
BB Harianto

Salah satu permasalahan dalam perkembangan teknologi telekomunikasi yaitu bagaimana mencapai data rate yang besar namun dengan bandwidth yang tidak lebih besar dari bandwidth koheren kanal untuk menghindari terjadinya Inter-Symbol Interference (ISI). Salah satu solusi yang ditawarkan yaitu transmisi multi-carrier. Cara kerja transmisi multi-carrier yaitu membagi total bandwidth signal yang tersedia menjadi beberapa subcarrier-subcarrier dengan bandwidth yang sempit. Sehingga bandwith masingmasing subcarrier yang dihasilkan tersebut menjadi lebih kecil jika dibandingkan dengan bandwidth koheren kanal. Salah satu transmisi multicarrier yang terbaru yaitu Orthogonal Frequency Division Multiplexing (OFDM) dimana subcarrier-subcarrier dapat saling tegak lurus satu sama lain sehingga bendwidth yang dibutuhkan menjadi lebih efisien jika dibandingkan dengan multicarrier konvensional seperti FDM. Sistem OFDM dapat diimplementasikan pada USRP yang merupakan salah satu jenis SDR (Software Defined Radio). SDR merupakan sistem pemancar dan penerima yang menggunakan pemrosesan sinyal digital untuk coding, decoding, modulasi dan demodulasi data. USRP tersebut digunakan sebagai model pemancar dan penerima pada pengukuran kualitas unjuk kerja sistem OFDM dengan barbagai kondisi. Pengukuran ini akan membandingkan hasil performansi parameter – parameter pada frekwensi 910 MHz dan 2.4 GHz. Spesifikasi sistem OFDM yang digunakan pada penelitian ini menggunakan software Labview dan dilakukan pada lingkungan indoor pada jarak 3m dan bandwidth 1 MHz. Hasil dari implementasi dan pengukuran menunjukkan bahwa parameter yang ditunjukkan oleh frekwensi 910 MHz lebih baik dari pada nilai parameter yang ditunjukkan oleh frekwensi 2.4


Sign in / Sign up

Export Citation Format

Share Document