Abstract
This article focuses on developing a non-invasive method for determining capacitances using frequency response data. The proposed methodology involves acquiring driving-point impedance of the winding under consideration over wide frequency range. With certain terminal conditions and using the terminal impedance measured at specific frequencies, input and shunt capacitances are determined. For the purpose of estimating series capacitance of the winding, an algorithm is proposed. To demonstrate the capability of the method, initially model coils that have provisions for connecting external capacitances are considered. Then, it is found that the estimated values of capacitances are nearly same as those of connected capacitances. The method is, then, extended to transformer winding, and a capacitive ladder network is constructed. To assess the accuracy of estimation, capacitive voltage distribution is utilized. That is, the voltage distribution in the winding is compared with that of synthesized circuit. A good agreement between those data reveals that the estimated capacitance values are accurate.