Determination of dynamic rotation factor for DWTT specimens by strain analysis and hardness measurement

2016 ◽  
Vol 39 (7) ◽  
pp. 830-838 ◽  
Author(s):  
J. Fang ◽  
J.W. Zhang ◽  
Y.D. Zhou
Keyword(s):  
Strain Analysis ◽  
Hardness Measurement ◽  
Rotation Factor ◽  
Dynamic Rotation

Simulation of stress and strain analysis on a delimbing knife with replaceable cutting edge

BioResources ◽  
2020 ◽  
Vol 15 (2) ◽  
pp. 3799-3808
Author(s):  
Ján Melicherčík ◽  
Jozef Krilek ◽  
Pavol Harvánek
Keyword(s):  
Finite Element Method ◽  
Stress Analysis ◽  
Cutting Force ◽  
Woody Plants ◽  
Strain Analysis ◽  
Cutting Edge ◽  
Stress And Strain ◽  
Cutting Knife ◽  
Basic Parameters

This study focused on stress and strain analysis of the cutting force of a branch knife with a replaceable cutting edge. The replaceable edge forms part of the delimbing head, which is applied to the arms of a mechanical harvester working in forestry. Basic parameters of the knife and head of the harvester with the basic calculations necessary to determine the number of knives based on input parameters, such as wood diameter, woody plants, and determination of the cutting force acting on the cutting knife, were examined. Based on the cutting force and the design of the special cutting knife, a stress analysis and a finite element method (FEM) was performed. This study confirmed the correctness of the selected material to produce the delimbing knife, which was designed using a replaceable cutting edge. The output of the stress analysis is reported.

Determination of the Mechanical Characteristics of the Metal of the Equipment of Nuclear Power Stations from Hardness Measurement and Indentation Data

2019 ◽  
Vol 51 (3) ◽  
pp. 381-387 ◽  
Author(s):  
R. V. Kravchuk ◽  
O. A. Katok ◽  
V. V. Kharchenko ◽  
A. A. Kotlyarenko ◽  
M. P. Rudnyts’kyi
Keyword(s):  
Nuclear Power ◽  
Mechanical Characteristics ◽  
Hardness Measurement ◽  
Power Stations

Determination of the Mechanical Response of Thin Films with X-Rays

1993 ◽  
Vol 308 ◽  
Author(s):  
I. C. Noyan ◽  
G. Sheikh
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Mechanical Response ◽  
Strain Analysis ◽  
Local Strain ◽  
X Rays ◽  
Stress Strain ◽  
X Ray ◽  
The Individual

ABSTRACTThe mechanical response of a specimen incorporating thin films is dictated by a combination of fundamental mechanical parameters such as Young's moduli of the individual layers, and by configurational parameters such as adhesion strength at the interface(s), residual stress distribution and other process dependent factors. In most systems, the overall response will be dominated by the properties of the (much thicker) substrate. Failure within the individual layers, on the other hand, is dependent on the local strain distributions and can not be predicted from the substrate values alone. To better understand the mechanical response of these systems, the strain within the individual layers of the thin film system must be measured and correlated with applied stresses. Phase selectivity of X-ray stress/strain analysis techniques is well suited for this purpose. In this paper, we will review the use of the traditional x-ray stress/strain analysis methods for the determination of the mechanical properties of thin film systems.

In Vivo Determination of Elastic Modulus of Canine Cardiac Muscle

1972 ◽  
Vol 94 (4) ◽  
pp. 912-916 ◽  
Author(s):  
J. F. Lafferty ◽  
E. P. McCutcheon ◽  
J. E. Funk ◽  
A. M. Higgins
Keyword(s):  
Elastic Modulus ◽  
Left Ventricle ◽  
Circumferential Stress ◽  
Isotonic Saline ◽  
Strain Analysis ◽  
Volume Data ◽  
Rapid Injection ◽  
The Mean

A practical technique was developed for in vivo determinations of the mechanical properties of canine left ventricle. A “quick stretch” was accomplished by rapid injection of isotonic saline into the ventricle during isovolumetric systole. The experimental pressure-volume data and a stress-strain analysis of the left ventricle as a thick-walled sphere permitted determination of the effective elastic modulus as a function of the mean circumferential stress. The elastic modulus E was found to be a linear function of the mean tangential stress σ throughout the isovolumetric systolic period; the slope (K, modulus of stiffness) of the Eversus σ curve was 18.8 with a standard deviation of 0.9.

Moire´ Patterns of Partial Derivatives of Displacement Components

1966 ◽  
Vol 33 (4) ◽  
pp. 901-906 ◽  
Author(s):  
V. J. Parks ◽  
A. J. Durelli
Keyword(s):  
Nonlinear Deformation ◽  
Strain Tensor ◽  
Strain Analysis ◽  
The Other ◽  
Partial Derivatives ◽  
Moire Patterns ◽  
Derivatives Of ◽  
Moiré Patterns

The knowledge of the partial derivatives of displacement components is essential in strain analysis. Two methods of determining these partial derivatives using moire´ effects are presented in this paper. One consists of superposing two shifted copies of the same deformed grating of lines. The other consists of superposing two shifted copies of moire´ patterns of displacement components. Explanations of the phenomena, based on the parametric properties of superposed families of lines, are given. Applications to the determination of the nonlinear deformation and strain tensor are included.

Sign in / Sign up

Export Citation Format

Share Document