scholarly journals A CTOD equation based on the rigid rotational factor with the consideration of crack tip blunting due to strain hardening for SEN(B)

2019 ◽  
Vol 42 (7) ◽  
pp. 1622-1630
Author(s):  
WeeLiam Khor
Keyword(s):  
Strain Hardening ◽  
Crack Tip ◽  
Rotational Factor ◽  
Crack Tip Blunting

scholarly journals Predicting How Crack Tip Residual Stresses Influence Brittle Fracture

2002 ◽  
Author(s):  
Saeid Hadidimoud ◽  
Ali Mirzaee-Sisan ◽  
Chris E. Truman ◽  
David J. Smith
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Experimental Studies ◽  
Crack Tip ◽  
Distribution Model ◽  
Relative Importance ◽  
Local Approach ◽  
Weibull Parameters ◽  
Experimental Scatter ◽  
Crack Tip Blunting

A probability distribution model, based on the local approach to fracture, has been developed and used for estimating cleavage fracture following prior loading (or warm pre-stressing) in two ferritic steels. Although there are many experimental studies it is not clear from these studies whether the generation of local residual stress and/or crack tip blunting as a result of prior loading contribute to the enhancement in toughness. We first identify the Weibull parameters required to match the experimental scatter in lower shelf toughness of the candidate steels. Second we use these parameters in finite element simulations of prior loading on the upper shelf followed by unloading and cooling to lower shelf temperatures to determine the probability of failure. The predictions are consistent with experimental scatter in toughness following WPS and provide a means of determining the relative importance of the crack tip residual stresses and crack tip blunting. We demonstrate that for our steels the crack tip residual stress is the pivotal feature in improving the fracture toughness following WPS. The paper finally discusses these results in the context of the non-uniqueness and the sensitivity of the Weibull parameters.

Effect of inhomogeneous distribution of non-metallic inclusions on crack path deflection in G42CrMo4 steel at different loading rates

2015 ◽  
Author(s):  
S. Henschel ◽  
L. Krüger
Keyword(s):  
Fracture Mechanics ◽  
Crack Growth ◽  
Crack Path ◽  
Testing Machine ◽  
Crack Tip ◽  
Crack Growth Resistance ◽  
Impact Testing ◽  
Inhomogeneous Distribution ◽  
Metallic Inclusions ◽  
Crack Tip Blunting

An inhomogeneous distribution of non-metallic inclusions can result from the steel casting process. The aim of the present study was to investigate the damaging effect of an inhomogeneous distribution of nonmetallic inclusions on the crack extension behavior. To this end, the fracture toughness behavior in terms of quasi-static J-?a curves was determined at room temperature. Additionally, dynamic fracture mechanics tests in an instrumented Charpy impact-testing machine were performed. The fracture surface of fracture mechanics specimens was analyzed by means of scanning electron microscopy. It was shown that an inhomogeneous distribution significantly affected the path and, therefore, the plane of crack growth. Especially clusters of non-metallic inclusions with a size of up to 200 ?m exhibited a very low crack growth resistance. Due to the damaging effect of the clusters, the growing crack was strongly deflected towards the cluster. Furthermore, crack tip blunting was completely inhibited when inclusions were located at the fatigue precrack tip. Due to the large size of the non-metallic inclusion clusters, the height difference introduced by crack path deflection was significantly larger than the stretch zone height due to the crack tip blunting. However, the crack path deflection introduced by a cluster was not associated with a toughness increasing mechanism. The dynamic loading ( 1 0.5 5 s MPam 10 ? ? K? ) did not result in a transition from ductile fracture to brittle fracture. However, the crack growth resistance decreased with increased loading rate. This was attributed to the higher portion of relatively flat regions where the dimples were less distinct.

J-integral studies of crack initiation and crack tip-blunting of phenolphthalein polyether ketone

1994 ◽  
Vol 54 (3) ◽  
pp. 375-383 ◽  
Author(s):  
Yanchun Han ◽  
Yuming Yang ◽  
Binyao Li ◽  
Zhiliu Feng
Keyword(s):  
Crack Initiation ◽  
Crack Tip ◽  
J Integral ◽  
Crack Tip Blunting

Butyl Networks Containing Unattached Polyisobutylene Chains: Part II, Correlation of Tear, Tensile, and Hysteretic Properties

1986 ◽  
Vol 59 (2) ◽  
pp. 347-360 ◽  
Author(s):  
G. R. Hamed ◽  
F. Ogbimi
Keyword(s):  
Molecular Weight ◽  
Crack Tip ◽  
The Other ◽  
Low Molecular Weight ◽  
Load Bearing ◽  
Tear Strength ◽  
Tearing Energy ◽  
High Molecular Weight Polyisobutylene ◽  
Hysteretic Properties ◽  
Crack Tip Blunting

Abstract Butyl networks containing either unattached polyisobutylene chains or a low-molecular-weight plasticizer have been made by crosslinking butyl rubber in the presence of one of these diluents. With dodecane as a plasticizer, tear strength is reduced both because of a decrease in the density of load-bearing chains and diminished hysteresis. On the other hand, when the diluent is a high-molecular-weight polyisobutylene, tear strength is enhanced if the test rate is sufficiently high. In this case, the polyisobutylene chains are load bearing (at least initially) before slipping at higher strains to relieve local crack-tip stresses and blunt the propagating tear. This hysteretic mechanism delays the onset of crack propagation, thereby enhancing the fracture energy. However, at low tear rates, in which there is adequate time for the unattached chains to relax such that they bear little load and hysteresis is minimized, tear strength decreases with increasing free-chain content—much the same as occurs with a low-molecular-weight diluent. Finally, under conditions in which the average propagating tearing energy is enhanced for the butyl-polyisobutylene system, the initiation tearing energy is increased only moderately. This suggests that crack-tip blunting during steady-state tearing is at least partially responsible for increases in strength in the presence of free chains.

Sign in / Sign up

Export Citation Format

Share Document