An in-vitro investigation into the effect of fatty foods on drug release from a polysaccharide based controlled release dosage form

The present investigation focuses on the development of mucoadhesive tablets of captopril which are designed to prolong the gastric residence time after oral administration. Matrix tablets of captopril were formulated using four mucoadhesive polymers namely guar gum, xanthan gum, HPMC K4M and HPMC K15M and studied for parameters such as weight variation, thickness, hardness, content uniformity, swelling index, mucoadhesive force and in vitro drug release. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M provide slow release of captopril over period of 12 hr and were found suitable for maintenance portion of oral controlled release tablets. The cumulative % of drug release of formulation F9 and F10 were 90 and 92, respectively. In vitro release from these tablets was diffusion controlled and followed zero order kinetics. The ‘n’ values obtained from the pappas-karsemeyer equation suggested that all the formulation showed drug release by non-fickian diffusion mechanism. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M (1:1) were established to be the optimum formulation with optimum bioadhesive force, swelling index & desired invitro drug release. This product was further subjected to stability study, the results of which indicated no significant change with respect to Adhesive strength and in vitro drug release study.

Download Full-text

Formulation Development and Characterization of controlled release core in cup matrix tablets of venlafaxine HCl

Current Drug Therapy ◽

10.2174/1574885515666200331104440 ◽

2020 ◽

Vol 15 ◽

Author(s):

Balaji Maddiboyina ◽

Vikas Jhawat ◽

Gandhi Sivaraman ◽

Om Prakash Sunnapu ◽

Ramya Krishna Nakkala ◽

...

Keyword(s):

Controlled Release ◽

Drug Release ◽

Release Rate ◽

Zero Order ◽

Water Soluble ◽

Matrix Tablets ◽

Drug Dissolution ◽

Crystalline Cellulose ◽

Hydrophobic Polymers

Background: Venlafaxine HCl is a selective serotonin reuptake inhibitor which is given in the treatment of depression. The delivery of the drug at a controlled rate can be of great importance for prolonged effect. Objective: The objective was to prepare and optimize the controlled release core in cup matrix tablet of venlafaxine HCl using the combination of hydrophilic and hydrophobic polymers to prolong the effect with rate controlled drug release. Methods: The controlled release core in cup matrix tablets of venlafaxine HCl were prepared using HPMC K5, K4, K15, HCO, IPA, aerosol, magnesium sterate, hydrogenated castor oil and micro crystalline cellulose PVOK-900 using wet granulation technique. Total ten formulations with varying concentrations of polymers were prepared and evaluated for different physicochemical parameters such FTIR analysis for drug identification, In-vitro drug dissolution study was performed to evaluate the amount of drug release in 24 hrs, drug release kinetics study was performed to fit the data in zero order, first order, Hixson–crowell and Higuchi equation to determine the mechanism of drug release and stability studies for 3 months as observed. Results: The results of hardness, thickness, weight variation, friability and drug content study were in acceptable range for all formulations. Based on the In vitro dissolution profile, formulation F-9 was considered to be the optimized extending the release of 98.32% of drug up to 24 hrs. The data fitting study showed that the optimized formulation followed the zero order release rate kinetics and also compared with innovator product (flavix XR) showed better drug release profile. Conclusion: The core-in-cup technology has a potential to control the release rate of freely water soluble drugs for single administration per day by optimization with combined use of hydrophilic and hydrophobic polymers.

Download Full-text

Fabrication and In Vitro Evaluation of pH-Sensitive Polymeric Hydrogels as Controlled Release Carriers

Gels ◽

10.3390/gels7030110 ◽

2021 ◽

Vol 7 (3) ◽

pp. 110

Author(s):

Muhammad Suhail ◽

Chih-Wun Fang ◽

Arshad Khan ◽

Muhammad Usman Minhas ◽

Pao-Chu Wu

Keyword(s):

Controlled Release ◽

Drug Release ◽

Acrylic Acid ◽

Chondroitin Sulfate ◽

Diclofenac Sodium ◽

Research Work ◽

Controlled Delivery ◽

Scanning Calorimetry ◽

Release Studies

The purpose of the current investigation was to develop chondroitin sulfate/carbopol-co-poly(acrylic acid) (CS/CBP-co-PAA) hydrogels for controlled delivery of diclofenac sodium (DS). Different concentrations of polymers chondroitin sulfate (CS), carbopol 934 (CBP), and monomer acrylic acid (AA) were cross-linked by ethylene glycol dimethylacrylate (EGDMA) in the presence of ammonium peroxodisulfate (APS) (initiator). The fabricated hydrogels were characterized for further experiments. Characterizations such as Scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), Differential scanning calorimetry (DSC), Powder X-ray diffractometry (PXRD), and Fourier transform infrared spectroscopy (FTIR) were conducted to understand the surface morphology, thermodynamic stability, crystallinity of the drug, ingredients, and developed hydrogels. The swelling and drug release studies were conducted at two different pH mediums (pH 1.2 and 7.4), and pH-dependent swelling and drug release was shown due to the presence of functional groups of both polymers and monomers; hence, greater swelling and drug release was observed at the higher pH (pH 7.4). The percent drug release of the developed system and commercially available product cataflam was compared and high controlled release of the drug from the developed system was observed at both low and high pH. The mechanism of drug release from the hydrogels followed Korsmeyer–Peppas model. Conclusively, the current research work demonstrated that the prepared hydrogel could be considered as a suitable candidate for controlled delivery of diclofenac sodium.

Download Full-text

Preparation and in Vitro Evaluation of Controlled Release Dosage form of Indomethacin

Drug Development and Industrial Pharmacy ◽

10.3109/03639048709116234 ◽

1987 ◽

Vol 13 (7) ◽

pp. 1267-1278 ◽

Cited By ~ 4

Author(s):

Biswanath Sa ◽

Suranjana Roy ◽

Sudip K. Das

Keyword(s):

Controlled Release ◽

Dosage Form ◽

In Vitro Evaluation

Download Full-text

Formulation and Evaluation of Luliconazole Microsponges Loaded Gel for Topical Delivery

Research Journal of Pharmacy and Technology ◽

10.52711/0974-360x.2021.01004 ◽

2021 ◽

pp. 5775-5780

Author(s):

Farhana Sultan ◽

Himansu Chopra ◽

Gyanendra Kumar Sharma

Keyword(s):

Controlled Release ◽

Drug Release ◽

Ethyl Cellulose ◽

Entrapment Efficiency ◽

Topical Delivery ◽

Production Yield ◽

In Vitro Drug Release ◽

Eudragit Rs ◽

Diffusion Studies

Microsponge containing Luliconazole (LCZ) with different proportion of drug:polymer (Ethyl cellulose and Eudragit RS 100) were obtained efficiently using Quasi-emulsion solvent diffusion method. Luliconazole is an anti-fungal drug used for the topical delivery. The purpose of the microsponge formulation is to control the release of LCZ drug to the skin through Microsponge Delivery System (MDS) known to be the novel technique which overcome the maximum concentration of active ingredient, frequency doses, and skin irritation. The prepared microsponges were examined using drug content, % production yield, % entrapment efficiency and in-vitro drug release. The formulation were subjected to in-vitro drug release studies for 6 hr in which it was concluded that Ethyl cellulose microsponges formulated by drug:polymer (1:1) and Eudragit RS 100 microsponges formulated by drug:polymer (1:3) showed maximum controlled release i.e., Increase in drug:polymer ratio (1:1 to 1:9) increased the production yield and entrapment efficiency of microsponges using Ethyl cellulose with no significant effect for Eudragit RS 100.Therefore, both formulation F1 and F2 was dispersed in carbopol gel preparation for controlled delivery of LCZ to the skin. Various physical parameters like pH, spreadability, viscosity and in-vitro drug diffusion studies were evaluated for the prepared gel formulations. Microsponge gel formulation i.e., FG1 showed better results for controlled release of 89.40% as compared to FG2 i.e., 92.18% over the period of 12 hrs which is performed in Franz Diffusion Cell. On basis of in-vitro diffusion studies for LCZ gel formulation, microsponges using Ethyl cellulose (FG1) was found to be best for its controlled release of LCZ for 12 hrs and followed zero order kinetics. Hence, formulated LCZ loaded gel have potential to treat fungal infections i.e., tinea pedis, tinea cruris and tinea corporis.

Download Full-text

DESIGN AND EVALUATION OF CONTROLLED-RELEASE OCULAR INSERTS OF BRIMONIDINE-TARTRATE AND TIMOLOL MALEATE

International Journal of Pharmacy and Pharmaceutical Sciences ◽

10.22159/ijpps.2017v9i1.15199 ◽

2016 ◽

Vol 9 (1) ◽

pp. 79 ◽

Cited By ~ 2

Author(s):

Preethi G. B. ◽

Prashanth Kunal

Keyword(s):

Controlled Release ◽

Drug Release ◽

Sodium Alginate ◽

Calcium Chloride ◽

Release Kinetics ◽

Water Soluble ◽

Moisture Loss ◽

Timolol Maleate ◽

Brimonidine Tartrate

Objective: The current work was attempted to formulate and evaluate a controlled-release matrix-type ocular inserts containing a combination of brimonidine tartrate and timolol maleate, with a view to sustain the drug release in the cul-de-sac of the eye.Methods: Initially, the infrared studies were done to determine the drug–polymer interactions. Sodium alginate-loaded ocuserts were prepared by solvent casting technique. Varying the concentrations of polymer—sodium alginate, plasticizer—glycerine, and cross-linking agent—calcium chloride by keeping the drug concentration constant, made a total of nine formulations. These formulations were evaluated for its appearance, drug content, weight uniformity, thickness uniformity, percentage moisture loss, percentage moisture absorption, and in vitro release profile of the ocuserts. Finally, accelerated stability studies and the release kinetics were performed on the optimised formulation.Results: It was perceived that polymer, plasticizer, and calcium chloride had a significant influence on the drug release. The data obtained from the formulations showed that formulation—F9 was the optimised formulation, which exhibited better drug release. The release data of the optimised formulation tested on the kinetic models revealed that it exhibited first-order release kinetics. Conclusion: It can be concluded that a natural bioadhesive hydrophilic polymer such as sodium alginate can be used as a film former to load water soluble and hydrophilic drugs like brimonidine tartrate and timolol maleate. Among all formulations, F9 with 400 mg sodium alginate, 2% calcium chloride and 60 mg glycerin were found to be the most suitable insert in terms of appearance, ease of handling, thickness, in vitro drug release and stability.

Download Full-text

Preparation and Characterization of Mucoadhesive Microcapsules of Gliclazide with Natural Gums

Stamford Journal of Pharmaceutical Sciences ◽

10.3329/sjps.v4i1.8865 ◽

1970 ◽

Vol 4 (1) ◽

pp. 38-48 ◽

Cited By ~ 4

Author(s):

Santhosh Kumar Mankala ◽

Nishanth Kumar Nagamalli ◽

Ramakrishna Raprla ◽

Rajyalaxmi Kommula

Keyword(s):

Drug Release ◽

Dosage Form ◽

Guar Gum ◽

Release Kinetics ◽

Insulin Dependent Diabetes Mellitus ◽

Dependent Diabetes Mellitus ◽

Release Mechanism ◽

Ionic Gelation ◽

Release Formulation

Gliclazide is an oral hypoglycemic agent used in management of non-insulin dependent diabetes mellitus. Among people who are suffering from long term disorders, the major were categorized under diabetes so, a dosage form is needed to provide continuous therapy with high margin of safety & such dosage form can be achieved by microencapsulation. Gliclazide microspheres with sodium alginate (coat material, gum kondagogu, gum guar and xanthan gum (mucoadhesive agents) were prepared by orifice-ionic gelation and emulsification ionic gelation techniques varying concentrations (1:0.25, 1:0.5, 1:0.75 and 1:1). Formulations were then evaluated for surface morphology, particle shape, Carr’s index, microencapsulation efficiency, drug release, mucoadhesion studies. Compatibility studies were performed by FTIR, DSC, and XRD techniques and no interactions were found between drug and excepients used. The microspheres were found spherical and free flowing with emulsion ionic gelation technique with a size range 400-600μm. % drug content and encapsulation efficiency found in the range of 55%-68% and, 86.23%-94.46% respectively. All microspheres showed good mucoadhesive property in in-vitro wash of test. In vitro drug release studies showed that the guar gum has more potentiality to retard the drug release compared to other gums and concentrations. Drug release from the microspheres was found slow following zero order release kinetics with non-fickian release mechanism stating release depended on the coat: core ratio and the method employed. The concentration of 1:1 of SA: GG (EMG 4) found suitable for preparing the controlled release formulation of gliclazide stating emulsification gelation technique is the best among followed. Key words: Gliclazide; Natural gums; orifice ionic gelation technique; emulsification ionic gelation technique DOI: http://dx.doi.org/10.3329/sjps.v4i1.8865 SJPS 2011; 4(1): 38-48

Download Full-text

Optimizing the Role of Polymer Blend in the Preparation of Acyclovir Controlled-Release Tablets: An Approach for Better Patient Compliance

10.20944/preprints201807.0165.v1 ◽

2018 ◽

Author(s):

Barkat Khan ◽

Faheem Haider ◽

Kifayat Shah ◽

Bushra Uzair ◽

Kaijian Hou ◽

...

Keyword(s):

Controlled Release ◽

Drug Release ◽

Release Kinetics ◽

Immediate Release ◽

Matrix Tablets ◽

Release Mechanism ◽

In Vitro Drug Release ◽

Solubility Study ◽

Release Data

This study was carried out to formulate and evaluate controlled release (CR) matrix tablets of Acyclovir using combination of hydrophilic and hydrophobic polymers. Acyclovir is a guanine derivative and is its half-life is short hence administered five times a day using immediate release tablets. Six formulations (F1-F6) were developed using Ethocel and Carbopol in equal combinations at drug-polymer (D:P) ratio of 10:5, 10:6, 10:7, 10:8, 10:9 and 10:10. Solubility study was performed using six different solvents. The compatibility studies were carried out using FTIR and DSC. According to USP, Quality Control and dimensional tests (hardness, friability, disintegration and thickness) were executed. In-vitro drug release studies of Acyclovir was carried out in dissolution apparatus using using 0.1 N HCl medium at constant temperature of 37 ± 0.5 ºC. In order to analyze the drug release kinetics, five different mathematical models were applied to the release data. The results showed that there was no incompatibility between drug and polymers. Physical QC tests were found within limits of USP. The release was retarded upto 24 hrs and non-fickian in-vitro drug release mechanism was found. A formulation developed using blend of polymers, showed excellent retention and desired release profiles thus providing absolute control for 24 hrs.

Download Full-text