The Efficacy of Selected Sodium Hypochlorite Heating Methods for Increasing and Maintaining Its Intracanal Temperature—An Ex Vivo Study

Background: Enhancement of the temperature of sodium hypochlorite (NaOCl) solution would increase its cleaning potential and decontamination of the root canal system. Therefore, the aim of the present in vitro investigation was to compare the efficacy of different methods of NaOCl heating by evaluating the temperature profiles developed at different levels of the root canal system. Methods: Five thermocouples were applied at different levels of the root canal system of extracted human premolars. NaOCl solution was heated according to two methods: extraoral heating (50 °C, 60 °C, and 70 °C) using a magnetic hotplate heater and intracanal heating by F-06, XF-30/04, and ML-12 pluggers at 100 °C, 150 °C, and 180 °C. Results: The extraoral heating method was ineffective to produce a significant temperature increase at the root apex. Comparable results were obtained using the intracanal heating method through the ML-12 plugger that showed slightly better results only when set at 180 °C. On the other hand, negligible differences were observed in terms of temperature maintenance at several levels of the root between the F-06 and XF-30/04 pluggers, even though the time intervals were higher in case of XF-30/04. Conclusions: The intracanal heating method provided a better temperature persistence in the middle third of the root canal system. Conversely, extraoral heating was ineffective to produce a significant temperature increase at the apex of the root. Comparable results were obtained even using the ML-12 plugger.

Dentin tubule occlusion by a 38% silver diamine fluoride gel: an in vitro investigation

Objective Silver diamine fluoride (SDF) is effective in treatment of dentin hypersensitivity and caries lesions. However, the non-viscous solution does not easily allow clinicians to control the application area. A 38% SDF experiment gel was compared in vitro to commercial SDF for its ability to penetrate and occlude dentinal tubules. Materials and methods Human root surface dentin specimens were treated with gelled or standard 38% SDF or negative control. Penetration behavior was established by Drop Shape Analysis. Precipitates at the surface and within tubules were analyzed by SEM and EDX after treatment; Results: penetration depths up to 500 µm were observed for both SDF formulations. Both formulations occluded dentinal tubules similarly. Precipitates on the dentin surface and within dentinal tubules were found for both SDF formulations, with a slight tendency for the experimental gel SDF product to be more abundant than the commercially available one. Discussion: behavior of the experimental 38% SDF gel formulation appeared indistinguishable from the commercial 38% SDF product with respect to dentinal tubule penetration and occlusion. Conclusions The experimental 38% SDF gel may be a suitable intervention for the prevention of dentin hypersensitivity.

Development of an Insulin Nano-Delivery System through Buccal Administration

Aim: To develop a new nano-delivery system for insulin buccal administration. Background: Biodegradable polymeric nanoparticles (PNPs) had viewed countless breakthroughs in drug delivery systems. The main objective of PNPs application in delivering and carrying different promising drugs is to make sure that the drugs being delivered to their action sites. As a result maximizing the desired effect and overcoming their limitations and drawbacks. Objectives: The main goals of this study were to produce an insulin consumable nano-delivery system for buccal administration and enhance the mucoadhesive effect in sustaining insulin release. Methods: Water in oil in water (W-O-W) microemulsion solvent evaporation technique was used for the preparation of nanoparticles consisting from positively charged poly (D, L-lactide-co-glycolide) coated with chitosan and loaded with insulin. Later, a consumable buccal film was prepared by the spin coating method and loaded with the previously prepared nanoparticles. Results: The newly prepared nanoparticle was assessed in terms of size, charge and surface morphology using a Scanning Electron Microscope (SEM), zeta potential, Atomic Force Microscope (AFM), and Fourier Transform Infra-red (FTIR) spectroscopy. An in-vitro investigation of the insulin release, from nanoparticles and buccal film, demonstrated controlled as well as sustained delivery over 6 hrs. The cumulative insulin release decreased to about (28.9%) with buccal film in comparing with the nanoparticle (50 %). Conclusion: The buccal film added another barrier for insulin release. Therefore, the release was sustained.

Effect of Enamel Pretreatment with Pastes Presenting Different Relative Dentin Abrasivity (RDA) Values on Orthodontic Bracket Bonding Efficacy of Microfilled Composite Resin: In Vitro Investigation and Randomized Clinical Trial

Bonding failure is a clinical issue frequently encountered in orthodontic practice. The aim of this study was to evaluate enamel pretreatment both in vitro and clinically using agents with different RDA values before brackets’ bonding, to assess if RDA can affect the Shear Bond Strength (SBS), Adhesive Remnant Index (ARI) and clinical failure rate of orthodontic brackets. For the in vitro study, 220 bovine teeth were pretreated with agents with different RDA values. Subsequently, brackets were bonded. For the clinical study, 20 patients underwent bonding of 20 brackets each with a split-mouth design. Low and high RDA toothpastes were used for enamel pretreatment. SBS, ARI and failures were recorded. Higher SBS values were found for teeth pretreated with lower RDA agents; conversely, lower SBS values were found for teeth pretreated with higher RDA agents (p < 0.05). For high ARI values, RDA increased too (p > 0.05). In the clinical study, a significantly lower failure rate was reported for teeth pretreated with low RDA toothpaste (2.5% in low RDA group, 7.0% in high RDA group; p < 0.05). No significant differences were assessed comparing the two dental arches and anterior and posterior sites. Enamel pretreatment with low RDA toothpastes could increase brackets’ survival rate. Further in vitro and clinical studies would be welcomed to confirm these findings.

Targeted specific inhibition of bacterial and Candida species by mesoporous Ag/Sn–SnO2 composite nanoparticles: in silico and in vitro investigation

Mesoporous Ag/Sn–SnO2 composite nanoparticles exhibits extraordinary inhibitory properties by targeting different proteins of bacteria and Candida species which can be used to eliminate the resistance of traditional antibiotics.

Reverse Iontophoretic Extraction of Skin Cancer-Related Biomarkers

Non-invasive methods for early diagnosis of skin cancer are highly valued. One possible approach is to monitor relevant biomarkers such as tryptophan (Trp) and kynurenine (Kyn), on the skin surface. The primary aim of this in vitro investigation was, therefore, to examine whether reverse iontophoresis (RI) can enhance the extraction of Trp and Kyn, and to demonstrate how the Trp/Kyn ratio acquired from the skin surface reflects that in the epidermal tissue. The study also explored whether the pH of the receiver medium impacted on extraction efficiency, and assessed the suitability of a bicontinuous cubic liquid crystal as an alternative to a simple buffer solution for this purpose. RI substantially enhanced the extraction of Trp and Kyn, in particular towards the cathode. The Trp/Kyn ratio obtained on the surface matched that in the viable skin. Increasing the receiver solution pH from 4 to 9 improved extraction of both analytes, but did not significantly change the Trp/Kyn ratio. RI extraction of Trp and Kyn into the cubic liquid crystal was comparable to that achieved with simple aqueous receiver solutions. We conclude that RI offers a potential for non-invasive sampling of low-molecular weight biomarkers and further investigations in vivo are therefore warranted.

In Vitro Investigation of Binding Interactions between Albumin–Gliclazide Model and Typical Hypotensive Drugs

Type 2 diabetes management usually requires polytherapy, which increases the risk of drug-to-drug interactions. Among the multiple diabetes comorbidities, hypertension is the most prevalent. This study aimed to investigate the binding interactions between the model protein, bovine albumin, and the hypoglycemic agent gliclazide (GLICL) in the presence of typical hypotensive drugs: quinapril hydrochloride (QUI), valsartan (VAL), furosemide (FUR), amlodipine besylate (AML), and atenolol (ATN). Spectroscopic techniques (fluorescence quenching, circular dichroism) and thermodynamic experiments were employed. The binding of the gliclazide to the albumin molecule was affected by the presence of an additional drug ligand, which was reflected by the reduced binding constant of the BSA–DRUG–GLICL system. This may indicate a possible GLICL displacement and its enhanced pharmacological effect, as manifested in clinical practice. The analysis of the thermodynamic parameters indicated the spontaneity of the reaction and emphasized the role of hydrogen bonding and van der Waals forces in these interactions. The secondary structure of the BSA remained almost unaffected.