AERODYNAMIC OF UITM'S BLENDED-WING-BODY UNMANNED AERIAL VEHICLE BASELINE-II EQUIPPED WITH ONE CENTRAL VERTICAL RUDDER

2015 ◽  
Vol 75 (8) ◽  
Author(s):  
Wirachman Wisnoe ◽  
Rizal E.M. Nasir ◽  
Ramzyzan Ramly ◽  
Wahyu Kuntjoro ◽  
Firdaus Muhammad
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Cfd Simulation ◽  
Aerodynamic Characteristics ◽  
Control Surface ◽  
Wind Tunnel Experiments ◽  
Aerodynamic Parameter ◽  
Aerial Vehicle ◽  
Computational Fluid Dynamics Cfd ◽  
Blended Wing Body ◽  
Lift And Drag

In this paper, a study of aerodynamic characteristics of UiTM's Blended-Wing-Body Unmanned Aerial Vehicle (BWB-UAV) Baseline-II in terms of side force, drag force and yawing moment coefficients are presented through Computational Fluid Dynamics (CFD) simulation. A vertical rudder is added to the aircraft at the rear centre part of the fuselage as yawing control surface. The study consists of varying the side slip angles for various rudder deflection angles and to plot the results for each aerodynamic parameter. The comparison with other yawing control surface for the same aircraft obtained previously are also presented. For validation purpose, the lift and drag coefficients are compared with the results obtained from wind tunnel experiments. 

scholarly journals Aerodynamic Analysis of Blended Wing Body - Unmanned Aerial Vehicle (BWB-UAV) Equipped with Horizontal Stabilizers

2019 ◽  
Vol 256 ◽  
pp. 02004
Author(s):  
Nornashiha Mohd Saad ◽  
Wirachman Wisnoe ◽  
Rizal Effendy Mohd Nasir ◽  
Zurriati Mohd Ali ◽  
Ehan Sabah Shukri Askari
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Cfd Simulation ◽  
Lift Coefficient ◽  
Angle Of Attack ◽  
Flight Test ◽  
Longitudinal Direction ◽  
Static Stability ◽  
Pitching Moment ◽  
Aerial Vehicle ◽  
Blended Wing Body

This paper presents an aerodynamic characteristic study in longitudinal direction of UiTM Blended Wing Body-Unmanned Aerial Vehicle Prototype (BWB-UAV Prototype) equipped with horizontal stabilizers. Flight tests have been conducted and as the result, BWB experienced overturning condition at certain angle of attack. Horizontal stabilizer was added at different location and size to overcome the issue during the flight test. Therefore, Computational Fluid Dynamics (CFD) analysis is performed at different configuration of horizontal stabilizer using Spalart - Allmaras as a turbulence model. CFD simulation of the aircraft is conducted at Mach number 0.06 or v = 20 m/s at various angle of attack, α. The data of lift coefficient (CL), drag coefficient (CD), and pitching moment coefficient (CM) is obtained from the simulations. The data is represented in curves against angle of attack to measure the performance of BWB prototype with horizontal stabilizer. From the simulation, configuration with far distance and large horizontal stabilizer gives steeper negative pitching moment slope indicating better static stability of the aircraft.

scholarly journals Numerical studies influence configuration fairing flap track airfoil type naca 4412 and naca 6412 character unmanned aerial vehicle (UAV)

2018 ◽  
Vol 197 ◽  
pp. 08017
Author(s):  
Handrico Ramelan Pratama ◽  
Muhammad Agung Bramantya
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Lift Coefficient ◽  
Major Influence ◽  
Numerical Studies ◽  
Aerial Vehicle ◽  
Drag And Lift ◽  
Lift And Drag ◽  
Drag Ratio

Wings have a function of changing the air flowing into force lift, and drag. It can reduce the drag is fairing flap track, where its function can reduce the obstacles caused by the effects of compressibility, fairing flap track also has a major influence on reducing the coefficient drag on airfoil. In this study, we observed the addition of fairing flap track to airfoil, fairing inspired by Sailfish and Blue Shark fish, its fins known to have speeds of 60 km/h. The independent variable in this research is compare airfoil NACA 4412 and NACA 6412, while the dependent variable is influence of fairing flap track configuration on unmanned aerial vehicle (UAV) character by knowing coefficient lift, coefficient drag and lift to drag ratio using software computational fluid dynamic (CFD). Simulation results know that the coefficient drag airfoil NACA 4412 decreased 0.3%, coefficient lift decreased 0.5% and coefficient drag airfoil NACA 6412 also decreased 0.4%, coefficient lift decreased 0.7%. It can be concluded that the addition of fairing on airfoil is very influential in reducing the value of coefficient drag and improve the coefficient lift on airfoil.

scholarly journals Aerodynamic Characteristics of Tube-Launched Tandem Wing Unmanned Aerial Vehicle

2018 ◽  
Vol 1005 ◽  
pp. 012015
Author(s):  
Nurhayyan H. Rosid ◽  
E. Irsyad Lukman ◽  
M. Ahmad Fadlillah ◽  
M. Agoes Moelyadi
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Aerodynamic Characteristics ◽  
Aerial Vehicle

Optimisation Studies for an Efficient Aerodynamic Configuration of a Blended Wing Unmanned Aerial Vehicle

2021 ◽  
Vol 13 (2) ◽  
Author(s):  
M.K. Padmanabhan ◽  
G. Santhoshkumar ◽  
Praveen Narayan ◽  
N. Jeevaraj ◽  
M. Dinesh ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Focal Point ◽  
Lift Coefficient ◽  
Innovative Design ◽  
Aerodynamic Efficiency ◽  
Payload Capacity ◽  
Aerial Vehicle ◽  
Computational Fluid Dynamics Cfd ◽  
The Cost ◽  
Long Endurance

There are various configurations and parameters that contribute to the Design of Unmanned Aerial Vehicles for specific applications. This paper deals with an innovative design of an unmanned aerial vehicle for a specified class of UAVs that require demands such as long endurance, minimized landing space with vertical take-off and landing (VTOL) capabilities. The focal point of this design is superimposing the high endurance blended wing design into tri-copter to address these parameters. The preliminary calculations are initially performed for the blended wing VTOL vehicle based on the required payload capacity and endurance. Superimposing the tri-copter will decrease the aerodynamic efficiency of the vehicle. Computational fluid dynamics (CFD) is a branch of fluid mechanics that uses numerical methods and algorithms to solve complex problems involving fluid flow which will effectively employed to reduce the cost and time during the conceptual and preliminary design stages. CFD analysis was carried out to estimate the major parameters like lift, drag, lift coefficient (CL) and drag coefficient (CD) for various Angle of Attack (AoA) for configurations of blended wing vehicle with and without tri-copter system in the cruise condition. Thus, the vehicle design and propulsion system is effectively optimized using this drag estimation.

Numerical Prediction of Blended Wing Body Aerodynamic Characteristics at Subsonic Speed

2014 ◽  
Vol 71 (2) ◽  
Author(s):  
Pang Jung Hoe ◽  
Nik Ahmad Ridhwan Nik Mohd
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
High Performance ◽  
Aerodynamic Characteristic ◽  
Aerodynamic Characteristics ◽  
Numerical Prediction ◽  
Navier Stokes ◽  
Subsonic Speed ◽  
Computational Fluid Dynamics Cfd ◽  
Blended Wing Body

The need for high performance and green aircraft has brought the blended wing (BWB) aircraft concept to the centre of interest for many researchers. BWB is a type of aircraft characterized by a complex blending geometry between fuselage and wing. Recently, many researches had been performed to unlock its aerodynamic complexity that is still not well understood. In this paper, aerodynamic characteristic of a baseline BWB configuration derived from simple conventional aircraft configuration was analysed using the Reynolds-averaged Navier-Stokes computational fluid dynamics (CFD) solver. The main objectives of this work are to predict the aerodynamic characteristics of the BWB concept at steady flight conditions and at various pitch angles. The results obtained are then compared against a simple conventional aircraft configuration (CAC). The results show that the BWB configuration used has 24% higher L/D ratio than the CAC. The increment to the L/D however is mainly due to lower drag than the improvement in the lift. 

Sign in / Sign up

Export Citation Format

Share Document