A DUAL BAND MIMO DIELECTRIC RESONATOR ANTENNA FOR WLAN APPLICATION

2015 ◽  
Vol 77 (10) ◽  
Author(s):  
Nuramirah Mohd Nor ◽  
Mohd Haizal Jamaluddin
Keyword(s):  
Dielectric Resonator ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Dielectric Resonator Antenna ◽  
Multiple Input ◽  
Input Multiple Output

In this paper, a dual band multiple-input-multiple-output dielectric resonator antenna for wireless local area network application is presented. Two identical feeding techniques are used to feed the proposed antenna. The simulated impedance bandwidth for both port are the same which are 6.5% at 2.45 GHz and 3% at 5.2 GHz. The DRA also has an acceptable value of isolation over the operating frequency. The simulated S-parameter and other multiple-input-multiple-output parameters are studied and observed.

Design of a Compact Dual Band-Notched Ultra-Wideband Diversity Antenna for MIMO Applications

2014 ◽  
Vol 711 ◽  
pp. 316-319
Author(s):  
Bao Jun Song ◽  
Hui Zhao ◽  
Tong Xu ◽  
Qin Zhang
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Ring Resonators ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Multiple Input ◽  
Diversity Antenna

A compact dual band-notched ultra-wideband (UWB) diversity antenna for multiple-input-multiple-output (MIMO) application is presented in this letter. The antenna consists of two tapered microstrip feeding lines and two semi-circle patches as the radiators. The C-band and wireless local area network (WLAN) for IEEE 802.11a band-notched function is achieved by etching four split-ring resonators (SRR) in the patches. The simulated and measured results show that the proposed antenna has a broadband impedance bandwidth covering the UWB band with definition of |S11|<-10dB and a dual band-notched function at C-band and WLAN band. As a multiple-input antenna, a good isolation |S21| between two ports better than -15 dB across the UWB is also achieved. The radiation patterns, peak gain, and envelope correlation coefficient are also measured and discussed.

scholarly journals A MIMO H-shape Dielectric Resonator Antenna for 4G Applications

2018 ◽  
Vol 10 (2) ◽  
pp. 648
Author(s):  
S. Salihah ◽  
M. H. Jamaluddin ◽  
R. Selvaraju ◽  
M. N. Hafiz
Keyword(s):  
Electrical Properties ◽  
Dielectric Resonator ◽  
Return Loss ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Good Potential ◽  
Slot Coupling

In this article, a Multiple-Input-Multiple-Output (MIMO) H-shape Dielectric Resonator Antenna (DRA) is designed and simulated at 2.6 GHz for 4G applications. The proposed structure consists of H-shape DRA ( =10) which is mounted on FR4 substrate ( =4.6), and feed by two different feeding mechanisms. First, microstrip with slot coupling as Port 1. Second, coaxial probe as Port 2. The electrical properties of the proposed MIMO H-shape DRA in term of return loss, bandwidth and gain are completely obtained by using CST Microwave Studio Suite Software. The simulated results demonstrated a return loss more than 20 dB, an impedance bandwidth of 26 % (2.2 – 2.9 GHz), and gain of 6.11 dBi at Port 1. Then, a return loss more than 20 dB, an impedance bandwidth of 13 % (2.2 – 2.7 GHz), and gain of 6.63 dBi at Port 2. Both ports indicated impedance bandwidth more than 10 %, return loss lower than 20 dB, and gain more than 10 dBi at 2.6 GHz. The simulated electrical properties of the proposed design show a good potential for LTE applications.

scholarly journals Two-Port CPW-Fed Dual-Band MIMO Antenna for IEEE 802.11 a/b/g Applications

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Yuqing Dou ◽  
Zhuoni Chen ◽  
Jing Bai ◽  
Qibo Cai ◽  
Gui Liu
Keyword(s):  
Ieee 802.11 ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Frequency Bands ◽  
Mimo Antenna

A coplanar waveguide- (CPW-) fed dual-band multiple-input multiple-output (MIMO) antenna for 2.45/5.5 GHz wireless local area network (WLAN) applications is presented in this paper. The presented MIMO antenna consists of two identical trapezoidal radiating elements which are perpendicular to each other. The size of the entire MIMO antenna is 50 × 50 × 1.59 mm3, which is printed on a FR4 substrate. The measured impedance bandwidth of the proposed antenna is 2.25–3.15 GHz and 4.89–5.95 GHz, which can cover IEEE 802.11 a/b/g frequency bands. A rectangular microstrip stub is introduced to achieve a good isolation which is less than −15 dB in both operation frequency bands. The measured peak gain is 5.59 dBi at 2.45 GHz and 5.63 dBi at 5.5 GHz. The measured antenna efficiency is 77.8% and 80.4% in the lower and higher frequency bands, respectively. The ECC values at the lower and higher frequencies are lower than 0.003 and 0.01, respectively.

COMPACT DUAL-BAND DIELECTRIC RESONATOR ANTENNA FOR 2.4/5.8 GHZ WLAN APPLICATIONS

2015 ◽  
Vol 77 (10) ◽  
Author(s):  
A. Mataria ◽  
M. R. Kamarudin ◽  
M. Khalily
Keyword(s):  
Radio Frequency Identification ◽  
Dielectric Resonator ◽  
Local Area Network ◽  
Monopole Antenna ◽  
Dual Band ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Dielectric Resonator Antenna ◽  
Dual Band Antenna

Design of a Dual-Band Dielectric Resonator Antenna (DRA) for the radio-frequency identification (RFID) and wireless local area network (WLAN) is presented. The necessity of a compact sized dual-band antenna is to allow the manufacturers to produce small size high-performance WLAN access points. The proposed antenna consists of printed T-Shaped monopole antenna and rectangular dielectric resonator to operate simultaneously at 2.4 and 5.8 GHz. The monopole antenna was printed on a standard 1.6 mm FR4 substrate material. Impedance bandwidth for -10 dB return loss in the 2.35 GHz and 5.86 GHz center frequency reaches 0.25 GHz (2.22 GHz to 2.47 GHz) and 0.28 GHz (5.72 GHz to 6 GHz), respectively. A good agreement is achieved between measured and simulated results.  This compact antenna fed by a 50 Ω microstrip line is a low-profile and easy to manufacture antenna.

Planar suspended line technique based UWB-MIMO antenna having dual-band notching characteristics

2020 ◽  
pp. 1-10
Author(s):  
Kirti Vyas ◽  
Rajendra Prasad Yadav
Keyword(s):  
Satellite Communication ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Local Area ◽  
Ultra Wideband ◽  
Dual Band ◽  
Electrical Performance ◽  
Impedance Bandwidth ◽  
Area Network

Abstract This communication reports significant isolation improvement utilizing planar suspended line (PSL) technique in ultra wideband (UWB) antenna for Multiple Input Multiple Output (MIMO) application. The antenna exhibits dual-band notched characteristic in Wireless Local Area Network (WLAN) band covering 5.45–5.85 GHz range; and in 7.15–7.95 GHz range for X-band downlink operations in satellite communication. Band-notching characteristics have been obtained by employing a single Elliptical Split Ring Resonator (ESSR) placed adjacent to each microstrip feed line of the radiating element and duo of “Y”-shaped strips employed within the circular ring of individual radiating elements. Two elements antenna occupy a compact space of 20 × 36 × 1.6 mm3 exhibiting huge measured impedance bandwidth (S11/S22 < −10 dB) covering 3.1–11.5 GHz and significant isolation of >21 dB in the almost entire band of operation. The electrical performance of antennas has been analyzed in terms of various MIMO parameters. Measured results demonstrate good accord with simulated results proving the competency of proposed antenna in high-density package systems and massive MIMO applications.

scholarly journals A Dual-Band Multiple Input Multiple Output Frequency Agile Antenna for GPSL1/Wi-Fi/WLAN2400/LTE Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Sajid Aqeel ◽  
M. H. Jamaluddin ◽  
Aftab Ahmad Khan ◽  
Rizwan Khan ◽  
M. R. Kamarudin ◽  
...  
Keyword(s):  
Dielectric Resonator ◽  
Frequency Tuning ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Single Element ◽  
Lower Band ◽  
Multiple Input ◽  
Input Multiple Output

A novel dual-band, single element multiple input multiple output (MIMO) dielectric resonator antenna (DRA) with a modest frequency tuning ability is presented in this communication. The proposed antenna operates at GPS L1/Bluetooth/Wi-Fi/LTE2500/WLAN2400 frequency bands. A single dielectric resonator element is fed by two coaxial probes to excite the orthogonal modes. A couple of slots are introduced on the ground plane to improve the isolation between antenna ports. The slots also serve the purpose of reconfiguration in the lower band on placement of switches at optimized locations. The measured impedance bandwidth is 5.16% (1.41–1.49 GHz) in the lower band and 26% (2.2–2.85 GHz) in the higher band. The lower band reconfigures with an impedance bandwidth of 6.5% (1.55–1.65 GHz) when PIN diodes are switched ON. The gain, efficiency, correlation coefficient, and diversity gain of the MIMO DRA are presented with a close agreement between simulated and measured results.

Compact cross-shaped parasitic strip based multiple-input multiple-output (MIMO) dielectric resonator antenna for ultra-wideband (UWB) applications

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Sachin Kumar Yadav ◽  
Amanpreet Kaur ◽  
Rajesh Khanna
Keyword(s):  
Dielectric Resonator ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Antenna Structure ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications

Abstract In this article, cross-shaped metallic parasitic strips based two radiator element multiple-input multiple-output (MIMO) dielectric resonator antenna (DRA) is excited by quadrature wave transformer microstrip feedline, designed, simulated and fabricated for ultra-wideband (UWB) applications. The proposed MIMO antenna structure is implemented with the help of two rectangular-shaped radiator elements that supports three modes HE11δ , HE21δ , and HE12δ at 4.4, 8.3, 10.8 GHz respectively. These fundamental and higher-order modes are supported to wide impedance bandwidth. Inverted T-shaped metallic strip and ground stub to improve the impedance bandwidth 104.6% (3.3–10.8 GHz) with 5.7 dBi peak gain, to enhance the coupling coefficient by stub, scissor-shaped defected ground structure and cross-shaped metallic parasitic strips are used in the existed structure. The MIMO diversity parameters are implemented as simulated ECC ≤ 0.003, DG ≥ 9.98 dB, and CCL ≤ 0.68. All the obtained MIMO antenna parameters are within the acceptable limit for providing high data rate for UWB applications.

Segmented quarter cylindrical dielectric resonator antenna: simulation and experimental investigation in composite form for wideband applications

2016 ◽  
Vol 9 (4) ◽  
pp. 881-890
Author(s):  
Pinku Ranjan ◽  
Ravi Kumar Gangwar
Keyword(s):  
Dielectric Resonator ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Dielectric Resonator Antenna ◽  
Composite Form

A probe feed wideband multi-element dual segments quarter cylindrical dielectric resonator antenna (q-CDRA) in composite forms have been proposed. The q-CDRA has been introduced by splitting CDRA into four uniform quarters and multi-segmentation approach has been castoff for further improvement in bandwidth of q-CDRA. The dual segments q-CDRA has been designed and analyzed using theoretical analysis and Ansoft HFSS simulation software. Further the dual segment multi-element q-CDRAs in composite form have been designed. A coaxial probe has been placed at the center of the ground plane for the excitation of proposed multi-element and multi-segmented composite form of q-CDRA, which excite TM01δ mode in the proposed antenna. The input characteristics and radiation patterns of the proposed composite antennas have been studied and their results are compared with corresponding experimental results. Prototype of single, two, and four elements dual-segment composite q-CDRAs have been fabricated and input characteristics of the proposed composite antennas have been compared with each other. Four elements dual-segment composite q-CDRA has shown wide impedance bandwidth (|S11| ≤ −10 dB) of 85.13% with monopole-like radiation pattern. The peak gain of 4.85 dBi with 98.5% radiation efficiency has been achieved for dual-segment four elements composite q-CDRA. The proposed multi-element dual-segment composite q-CDRAs may find suitable applications in C and X-band with complete covering of the 5.0 GHZ wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) band.

scholarly journals Performance analysis of IEEE 802.11ac based WLAN in wireless communication systems

2019 ◽  
Vol 9 (2) ◽  
pp. 1131 ◽  
Author(s):  
A. Z. Yonis
Keyword(s):  
Communication Systems ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Local Area ◽  
Area Network ◽  
Data Rates ◽  
Input Multiple Output ◽  
Ieee 802.11Ac ◽  
5 Ghz

<p><span lang="EN-US">IEEE 802.11ac based wireless local area network (WLAN) is emerging WiFi standard at 5 GHz, it is new gigabit-per-second standard providing premium services. IEEE 802.11ac accomplishes its crude speed increment by pushing on three distinct measurements firstly is more channel holding, expanded from a maximum of 80 MHz up to 160 MHz modes. Secondly, the denser modulation, now using 256-QAM, it has the ability to increase the data rates up to 7 Gbps using an 8×8 multiple input multiple output (MIMO). Finally, it provides high resolution for both narrow and medium bandwidth channels. This work presents a study to improve the performance of IEEE 802.11ac based WLAN system.</span></p>

Sign in / Sign up

Export Citation Format

Share Document