scholarly journals Two-Port CPW-Fed Dual-Band MIMO Antenna for IEEE 802.11 a/b/g Applications

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Yuqing Dou ◽  
Zhuoni Chen ◽  
Jing Bai ◽  
Qibo Cai ◽  
Gui Liu
Keyword(s):  
Ieee 802.11 ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Frequency Bands ◽  
Mimo Antenna

A coplanar waveguide- (CPW-) fed dual-band multiple-input multiple-output (MIMO) antenna for 2.45/5.5 GHz wireless local area network (WLAN) applications is presented in this paper. The presented MIMO antenna consists of two identical trapezoidal radiating elements which are perpendicular to each other. The size of the entire MIMO antenna is 50 × 50 × 1.59 mm3, which is printed on a FR4 substrate. The measured impedance bandwidth of the proposed antenna is 2.25–3.15 GHz and 4.89–5.95 GHz, which can cover IEEE 802.11 a/b/g frequency bands. A rectangular microstrip stub is introduced to achieve a good isolation which is less than −15 dB in both operation frequency bands. The measured peak gain is 5.59 dBi at 2.45 GHz and 5.63 dBi at 5.5 GHz. The measured antenna efficiency is 77.8% and 80.4% in the lower and higher frequency bands, respectively. The ECC values at the lower and higher frequencies are lower than 0.003 and 0.01, respectively.

A DUAL BAND MIMO DIELECTRIC RESONATOR ANTENNA FOR WLAN APPLICATION

2015 ◽  
Vol 77 (10) ◽  
Author(s):  
Nuramirah Mohd Nor ◽  
Mohd Haizal Jamaluddin
Keyword(s):  
Dielectric Resonator ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Dielectric Resonator Antenna ◽  
Multiple Input ◽  
Input Multiple Output

In this paper, a dual band multiple-input-multiple-output dielectric resonator antenna for wireless local area network application is presented. Two identical feeding techniques are used to feed the proposed antenna. The simulated impedance bandwidth for both port are the same which are 6.5% at 2.45 GHz and 3% at 5.2 GHz. The DRA also has an acceptable value of isolation over the operating frequency. The simulated S-parameter and other multiple-input-multiple-output parameters are studied and observed.

scholarly journals Design of a MIMO Antenna with High Gain and Enhanced Isolation for WLAN Applications

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1659
Author(s):  
He Peng ◽  
Ruixing Zhi ◽  
Qichao Yang ◽  
Jing Cai ◽  
Yi Wan ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Correlation Coefficients ◽  
Local Area ◽  
High Gain ◽  
Dual Band ◽  
Area Network ◽  
Frequency Bands ◽  
Mimo Antenna

A multi-input multi-output (MIMO) antenna for wireless local area network (WLAN) applications operating in 2.4 GHz and 5.8 GHz frequency bands is proposed in this paper. The proposed dual-band MIMO antenna is composed of two symmetrical radiation elements, and the isolation performance is improved by adopting parasitic elements and a defective ground plane. The measured reflection coefficients are less than −10 dB in the bandwidth range of 2.12–2.8 GHz and 4.95–6.65 GHz, respectively. The measurements show excellent isolation of −21 dB and −15 dB in both desired frequency bands, respectively. The total peak gain is greater than 4.8 dBi. The calculated envelope correlation coefficients (ECC), based on the measured S-parameters, are smaller than 0.01 and 0.024 in the lower and higher frequency bands, respectively. The dimension of the presented antenna occupies 50 × 40 × 1.59 mm3. It is suitable for IEEE 802.11 a/b/g/n (2.4–2.4835 GHz, 5.15–5.35 GHz and 5.725–5.85 GHz) WLAN applications.

Planar suspended line technique based UWB-MIMO antenna having dual-band notching characteristics

2020 ◽  
pp. 1-10
Author(s):  
Kirti Vyas ◽  
Rajendra Prasad Yadav
Keyword(s):  
Satellite Communication ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Local Area ◽  
Ultra Wideband ◽  
Dual Band ◽  
Electrical Performance ◽  
Impedance Bandwidth ◽  
Area Network

Abstract This communication reports significant isolation improvement utilizing planar suspended line (PSL) technique in ultra wideband (UWB) antenna for Multiple Input Multiple Output (MIMO) application. The antenna exhibits dual-band notched characteristic in Wireless Local Area Network (WLAN) band covering 5.45–5.85 GHz range; and in 7.15–7.95 GHz range for X-band downlink operations in satellite communication. Band-notching characteristics have been obtained by employing a single Elliptical Split Ring Resonator (ESSR) placed adjacent to each microstrip feed line of the radiating element and duo of “Y”-shaped strips employed within the circular ring of individual radiating elements. Two elements antenna occupy a compact space of 20 × 36 × 1.6 mm3 exhibiting huge measured impedance bandwidth (S11/S22 < −10 dB) covering 3.1–11.5 GHz and significant isolation of >21 dB in the almost entire band of operation. The electrical performance of antennas has been analyzed in terms of various MIMO parameters. Measured results demonstrate good accord with simulated results proving the competency of proposed antenna in high-density package systems and massive MIMO applications.

Design of a Compact Dual Band-Notched Ultra-Wideband Diversity Antenna for MIMO Applications

2014 ◽  
Vol 711 ◽  
pp. 316-319
Author(s):  
Bao Jun Song ◽  
Hui Zhao ◽  
Tong Xu ◽  
Qin Zhang
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Ring Resonators ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Multiple Input ◽  
Diversity Antenna

A compact dual band-notched ultra-wideband (UWB) diversity antenna for multiple-input-multiple-output (MIMO) application is presented in this letter. The antenna consists of two tapered microstrip feeding lines and two semi-circle patches as the radiators. The C-band and wireless local area network (WLAN) for IEEE 802.11a band-notched function is achieved by etching four split-ring resonators (SRR) in the patches. The simulated and measured results show that the proposed antenna has a broadband impedance bandwidth covering the UWB band with definition of |S11|<-10dB and a dual band-notched function at C-band and WLAN band. As a multiple-input antenna, a good isolation |S21| between two ports better than -15 dB across the UWB is also achieved. The radiation patterns, peak gain, and envelope correlation coefficient are also measured and discussed.

Multiple-input multiple-output antenna for dual-band applications with a novel radiating patch and enhanced feeding network

Circuit World ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yashar Zehforoosh ◽  
Payam Alemi
Keyword(s):  
Local Area Network ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Frequency Range ◽  
Network Systems ◽  
Content Type ◽  
Frequency Bands ◽  
Mimo Antenna ◽  
Slot Length

Purpose An Elephant trunk shape (ETS) radiating element is used to achieve the two covering bands of multi-input multi-output (MIMO) antenna. These frequency bands can be controlled by the length of a slot embedded in ETS. The slot length in ETS plays a defining role in controlling the impedance bandwidth (IBW) of the MIMO antenna, and its diligent adjustment of it leads to cover the frequency range of Bluetooth and Wireless Local Area Network systems. Design/methodology/approach A new MIMO antenna is introduced in this paper in conjunction with an enhanced Wilkinson power divider feeding platform. Findings These frequency bands can be controlled by the length of a slot embedded in ETS. The slot length in ETS plays a defining role in controlling the IBW of the MIMO antenna, and its diligent adjustment leads to covering the frequency range of Bluetooth and WLAN systems. Originality/value The proposed MIMO antenna benefits from good isolation between ports for both frequency bands. The proposed MIMO antenna is constructed on FR4 substrate with a volume of 90 × 134 × 1.6 mm3.

Novel dual-band multistrip monopole antenna with defected ground structure for WLAN/IMT/BLUETOOTH/WIMAX applications

2013 ◽  
Vol 6 (1) ◽  
pp. 93-100 ◽  
Author(s):  
Jaswinder Kaur ◽  
Rajesh Khanna ◽  
Machavaram Kartikeyan
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Design Procedure ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Simulation Results

In the present work, a novel multistrip monopole antenna fed by a cross-shaped stripline comprising one vertical and two horizontal strips has been proposed for wireless local area network (WLAN)/Industrial, Scientific, and Medical band (ISM)/International Mobile Telecommunication (IMT)/BLUETOOTH/Worldwide Interoperability for Microwave Access (WiMAX) applications. The designed antenna has a small overall size of 20 × 30 mm2. The goal of this paper is to use defected ground structure (DGS) in the proposed antenna design to achieve dual-band operation with appreciable impedance bandwidth at the two operating modes satisfying several communication standards simultaneously. The antenna was simulated using Computer Simulation Technology Microwave Studio (CST MWS) V9 based on the finite integration technique (FIT) with perfect boundary approximation. Finally, the proposed antenna was fabricated and some performance parameters were measured to validate against simulation results. The design procedure, parametric analysis, simulation results along with measurements for this multistrip monopole antenna using DGS operating simultaneously at WLAN (2.4/5.8 GHz), IMT (2.35 GHz), BLUETOOTH (2.45 GHz), and WiMAX (5.5 GHz) are presented.

Design of dual band-notched lamp-shaped antenna with UWB characteristics

2015 ◽  
Vol 9 (2) ◽  
pp. 395-402 ◽  
Author(s):  
Swati Yadav ◽  
Anil Kumar Gautam ◽  
Binod Kumar Kanaujia
Keyword(s):  
Electromagnetic Interference ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Dual Band ◽  
Electrical Performance ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Impedance Mismatch ◽  
Rectangular Slot

To restrict electromagnetic interference at WiMAX (3.3–3.7 GHz) and wireless local area network (WLAN) (5.15–5.825 GHz) bands operating within ultra wide bandwidth (UWB) band, a novel design of lamp-shaped UWB microstrip antenna with dual band-notched characteristics is presented. The proposed antenna is composed of a lamp-shaped radiating patch with two rectangular ground planes on both the sides of the radiator with the gap of 0.57 mm. To improve impedance mismatch at middle frequencies, two triangular strips one at each of the ground plane are added; whereas a rectangular slot is etched in the radiating patch to remove impedance mismatch at higher frequencies of the UWB band. Furthermore, an L-shaped slot in the radiator and two L-shaped slots in the ground plane are used to restrict electromagnetic interference (EMI) at WiMAX and WLAN bands, respectively, without affecting the electrical performance of the UWB antenna. Effects of the key parameters on the frequency range of the notched bands are also investigated. The proposed design shows a measured impedance bandwidth of 12.5 GHz (2.7–14.4 GHz), with the two band-notched bands of 3.0–3.9 and 4.9–5.8 GHz. The antenna is suitable to be integrated within the portable UWB devices without EMI interference at WiMAX and WLAN bands.

Design and analysis of a metamaterial inspired dual band antenna for WLAN application

2019 ◽  
Vol 11 (4) ◽  
pp. 351-358 ◽  
Author(s):  
Priyanka Garg ◽  
Priyanka Jain
Keyword(s):  
Reflection Coefficient ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Dual Band ◽  
Band Spectrum ◽  
Area Network ◽  
Dual Band Antenna ◽  
Compact Size

AbstractIn this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

scholarly journals A CPW-Fed Rectangular Ring Monopole Antenna for WLAN Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Sangjin Jo ◽  
Hyunjin Choi ◽  
Beomsoo Shin ◽  
Sangyeol Oh ◽  
Jaehoon Lee
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Local Area ◽  
Monopole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Feed Line ◽  
Compact Size

We present a simple coplanar waveguide- (CPW-) fed rectangular ring monopole antenna designed for dual-band wireless local area network (WLAN) applications. The antenna is based on a simple structure composed of a CPW feed line and a rectangular ring. Dual-band WLAN operation can be achieved by controlling the distance between the rectangular ring and the ground plane of the CPW feed line, as well as the horizontal vertical lengths of the rectangular ring. Simulated and measured data show that the antenna has a compact size of21.4×59.4 mm2, an impedance bandwidths of 2.21–2.70 GHz and 5.04–6.03 GHz, and a reflection coefficient of less than −10 dB. The antenna also exhibits an almost omnidirectional radiation pattern. This simple compact antenna with favorable frequency characteristics therefore is attractive for applications in dual-band WLAN.

Sign in / Sign up

Export Citation Format

Share Document