Robust Method for Wellhead Loads Estimation Based on Lower Stack Motion Measurements

2021 ◽  
Author(s):  
Ali Cetin ◽  
Harald Holden ◽  
Vegard R. Solum
Author(s):  
Ali Cetin ◽  
Harald Holden ◽  
Vegard R. Solum

Abstract Estimating wellhead loads from lower stack motion measurements is a practical and cost-effective approach. In this paper, a new method is proposed, which is based on system identification techniques rather than Newtonian mechanics, thus omitting reliance on uncertain and variable quantities such as lowerflex joint stiffness/damping, riser and drill pipe tension etc. The proposed method is simple and easy to apply, while maintaining accuracy. Both simulation and real-world measurement data are utilized to demonstrate and evaluate the method.


1998 ◽  
Vol 3 (5) ◽  
pp. 4-5
Author(s):  
Christopher R. Brigham

Abstract Accurate measurement of shoulder motion is critical in assessing impairment following shoulder disorders. To this end, measuring and recording joint motion are important steps in diagnosing, determining the severity and progression of a disorder, assessing the results of treatment, and evaluating impairment. Shoulder movement usually is composite rather than in a single plane, so isolating single movements is challenging. Universal goniometers with long arms are used to measure shoulder motion, and testing must be performed and recorded consistently. Passive motion may be carried out cautiously by the examiner; two measurements of the same patient by the same examiner should lie within 10° of each other. Shoulder extension and flexion are illustrated. Maximal flexion of the shoulder also includes slight external rotation and abduction, and controlling or eliminating these components during evaluation is challenging. Abduction and adduction are illustrated. Deficits in external rotation may occur in patients who have undergone reconstructive procedures with an anterior approach; deficits in internal rotation may result from issues with shoulder instability. The authors recommend recording the shoulder's range of motion measurements according to the Upper Extremity Impairment Evaluation Record in the AMA Guides to the Evaluation of Permanent Impairment, Fourth Edition.


Synthesis ◽  
2019 ◽  
Vol 52 (02) ◽  
pp. 311-319
Author(s):  
Austin D. Marchese ◽  
Bijan Mirabi ◽  
Egor M. Larin ◽  
Mark Lautens

A Ni-catalyzed C–S cross-coupling using only NiI2 (0.5–2.5 mol%) and P(OiPr)3 (2.0–10.0 mol%) is reported. Using an air-stable Ni(II) precatalyst, and a cheap and commercially available ligand, a scalable and robust method was developed to cross-couple various thiophenols and styryl bromides, including some sterically encumbered thiols, an α-bromocinnamaldehyde as well as a thiolation-cyclization.


Author(s):  
William J Henney ◽  
J A López ◽  
Ma T García-Díaz ◽  
M G Richer

Abstract We carry out a comprehensive kinematic and morphological study of the asymmetrical planetary nebula: NGC 6210, known as the Turtle. The nebula’s spectacularly chaotic appearance has led to proposals that it was shaped by mass transfer in a triple star system. We study the three-dimensional structure and kinematics of its shells, lobes, knots, and haloes by combining radial velocity mapping from multiple long-slit spectra with proper motion measurements from multi-epoch imaging. We find that the nebula has five distinct ejection axes. The first is the axis of the bipolar, wind-blown inner shell, while the second is the axis of the lop-sided, elliptical, fainter, but more massive intermediate shell. A further two axes are bipolar flows that form the point symmetric, high-ionization outer lobes, all with inclinations close to the plane of the sky. The final axis, which is inclined close to the line of sight, traces collimated outflows of low-ionization knots. We detect major changes in outflow directions during the planetary nebula phase, starting at or before the initial ionization of the nebula 3500 years ago. Most notably, the majority of redshifted low-ionization knots have kinematic ages greater than 2000 years, whereas the majority of blueshifted knots have ages younger than 2000 years. Such a sudden and permanent 180-degree flip in the ejection axis at a relatively late stage in the nebular evolution is a challenge to models of planetary nebula formation and shaping.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ryan Kozak ◽  
Kasra Khorsand ◽  
Telnaz Zarifi ◽  
Kevin Golovin ◽  
Mohammad H. Zarifi

AbstractA patch antenna sensor with T-shaped slots operating at 2.378 GHz was developed and investigated for wireless ice and frost detection applications. Detection was performed by monitoring the resonant amplitude and resonant frequency of the transmission coefficient between the antenna sensor and a wide band receiver. This sensor was capable of distinguishing between frost, ice, and water with total shifts in resonant frequency of 32 MHz and 36 MHz in the presence of frost and ice, respectively, when compared to the bare sensor. Additionally, the antenna was sensitive to both ice thickness and the surface area covered in ice displaying resonant frequency shifts of 2 MHz and 8 MHz respectively between 80 and 160 μL of ice. By fitting an exponential function to the recorded data, the freezing rate was also extracted. The analysis within this work distinguishes the antenna sensor as a highly accurate and robust method for wireless ice accretion detection and monitoring. This technology has applications in a variety of industries including the energy sector for detection of ice on wind turbines and power lines.


2021 ◽  
Vol 108 (Supplement_2) ◽  
Author(s):  
B Hughes ◽  
J Stallard ◽  
S Jivan

Abstract Introduction Surgical drains are used by many specialities, we aim to determine the most robust method of securing them by comparing suturing technique, material and fixation angle. Method A Blake’s drain was inserted into a piece of pork belly and secured using a standard ‘three half hitch’ technique with 3.0 Silk, EthilonTM and ProleneTM . For each suture type, drains were sutured in line, at 45 and 90 degrees to the course of the drain. The force needed for the suture to failure was measured and each repeated 3 times. Different suture techniques were then used to determine the strongest fixation. Results With the drain exiting inline the moment of failure was, on average, 1.25kg for silk, 3.5kg for EthilonTM and 4.0kg for ProleneTM. Increasing drain fixation angle required more force for the suture to fail. With EthilonTM and ProleneTM, the suture snapped before the drain slipped. Three half hitches was the strongest technique. Conclusions Suture material, technique and drain fixation angle had an impact on suture strength with ProleneTM outperforming Silk. We advocate using a ‘three half hitch’ technique with 3.0 ProleneTM to secure a surgical drain. It offers superior strength whilst reducing the risk of localised tissue reactions.


Nanoscale ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 5410-5418
Author(s):  
Rocío López-Cabeza ◽  
Melanie Kah ◽  
Renato Grillo ◽  
Zuzana Bílková ◽  
Jakub Hofman

Encapsulation efficiency of nanoformulated pesticides is often determined by centrifugal ultrafiltration.


2020 ◽  
Vol 53 (2) ◽  
pp. 6095-6100
Author(s):  
Yusuke Igarashi ◽  
Masaki Yamakita ◽  
Jerry Ng ◽  
H. Harry Asada
Keyword(s):  

2002 ◽  
Vol 43 (2) ◽  
pp. 344-349 ◽  
Author(s):  
Kevin P. Dwyer ◽  
P. Hugh R. Barrett ◽  
Dick Chan ◽  
Jock I. Foo ◽  
Gerald F. Watts ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document