Application of Adomian’s Decomposition Procedure to the Analysis of Convective-Radiative Fins

2003 ◽  
Vol 125 (2) ◽  
pp. 312-316 ◽  
Author(s):  
Ching-Huang Chiu ◽  
Cha’o-Kuang Chen
Keyword(s):  
Heat Dissipation ◽  
Convection Heat Transfer ◽  
Adomian Decomposition Method ◽  
Nonlinear Boundary Conditions ◽  
Energy Balance Equation ◽  
Variable Thermal Conductivity ◽  
Decomposition Procedure ◽  
Adomian Decomposition ◽  
Inside Face ◽  
Nonlinear Energy

This paper presents a method which may be used to determine the temperature distribution within a convective-radiative longitudinal fin of variable thermal conductivity, subject to convection heat transfer from a fluid of known temperature Tf through the inside face of the primary surface, and which experiences convection-radiation heat dissipation into the environment at its tip. The paper demonstrates the use of the Adomian decomposition method in generating an analytical solution of the resulting nonlinear energy balance equation with nonlinear boundary conditions.

scholarly journals An Efficient Analytical Technique, for The Solution of Fractional-Order Telegraph Equations

Mathematics ◽  
2019 ◽  
Vol 7 (5) ◽  
pp. 426 ◽  
Author(s):  
Hassan Khan ◽  
Rasool Shah ◽  
Poom Kumam ◽  
Dumitru Baleanu ◽  
Muhammad Arif
Keyword(s):  
Fractional Order ◽  
Decomposition Method ◽  
Adomian Decomposition Method ◽  
Analytical Techniques ◽  
Telegraph Equation ◽  
High Rate ◽  
Analytical Technique ◽  
Decomposition Procedure ◽  
Adomian Decomposition ◽  
Telegraph Equations

In the present article, fractional-order telegraph equations are solved by using the Laplace-Adomian decomposition method. The Caputo operator is used to define the fractional derivative. Series form solutions are obtained for fractional-order telegraph equations by using the proposed method. Some numerical examples are presented to understand the procedure of the Laplace-Adomian decomposition method. As the Laplace-Adomian decomposition procedure has shown the least volume of calculations and high rate of convergence compared to other analytical techniques, the Laplace-Adomian decomposition method is considered to be one of the best analytical techniques for solving fractional-order, non-linear partial differential equations—particularly the fractional-order telegraph equation.

An Approximate Solution of Muijderman's Model for Performance Calculation of Spiral Grooved Gas Seal

2017 ◽  
Vol 139 (5) ◽  
Author(s):  
Wanjun Xu ◽  
Jiangang Yang
Keyword(s):  
Approximate Solution ◽  
Decomposition Method ◽  
Adomian Decomposition Method ◽  
Kutta Method ◽  
Film Pressure ◽  
Runge Kutta Method ◽  
Decomposition Procedure ◽  
Adomian Decomposition ◽  
Runge Kutta ◽  
Performance Calculation

This paper presents an approximate solution of Muijderman's model for compressible spiral grooved gas film. The approximate solution is derived from Muijderman's equations by Adomian decomposition method. The obtained approximate solution expresses the gas film pressure as a function of the gas film radius. The traditional Runge–Kutta method is avoided. The accuracy of the approximate solution is acceptable, and it brings convenience for performance calculation of spiral grooved gas seal. A complete Adomian decomposition procedure of Muijderman's equations is presented. The approximate solution is validated with published results.

Closed-form solution for a rectangular stepped fin involving all variable thermal parameters and nonlinear boundary conditions

2016 ◽  
Vol 231 (5) ◽  
pp. 992-1010 ◽  
Author(s):  
Kuljeet Singh ◽  
Ranjan Das ◽  
Rohit K Singla
Keyword(s):  
Heat Transfer ◽  
Boundary Conditions ◽  
Decomposition Method ◽  
Nonlinear Boundary ◽  
Adomian Decomposition Method ◽  
Nonlinear Boundary Conditions ◽  
Thermal Parameters ◽  
Physical Parameters ◽  
Temperature Dependent ◽  
Adomian Decomposition

In this paper, the implementation of the Adomian decomposition method is demonstrated to solve a nonlinear heat transfer problem for a stepped fin involving all temperature-dependent means of heat transfer and nonlinear boundary conditions. Unlike conventional insulated tip assumption, to make the present problem more practical, the fin tip is assumed to disperse heat by convection and radiation. Thermal parameters such as the thermal conductivity, the surface heat transfer coefficient and the surface emissivity are considered to be temperature-dependent. Adomian polynomials are first obtained and then a set of Adomian decomposition method results is validated with pertinent results of the differential transformation method reported in the literature. Effects of different thermo-physical parameters on the temperature distribution and the efficiency have been exemplified. The study reveals that for a given set of conditions, the stepped fin may perform better than the straight fin.

Heat dissipation analysis of continuously-moving plate undergoing thermal processing using Laplace Adomian decomposition method

2017 ◽  
Vol 34 (7) ◽  
pp. 2242-2255
Author(s):  
Cha’o Kuang Chen ◽  
Yu-Shen Chang ◽  
Chin-Chia Liu ◽  
Bang-Shiuh Chen
Keyword(s):  
Thermal Processing ◽  
Decomposition Method ◽  
Heat Dissipation ◽  
Temperature Drop ◽  
Adomian Decomposition Method ◽  
Surface Emissivity ◽  
Moving Plate ◽  
Content Type ◽  
Practical Applications ◽  
Adomian Decomposition

Purpose This paper aims to use the Laplace Adomian decomposition method (LADM) to investigate the effects of thermal convection, thermal conduction, surface emissivity and thermal radiation on the heat dissipated by a continuously moving plate undergoing thermal processing. Design/methodology/approach In performing the analysis, it is assumed that the thermal conductivity and surface emissivity of the plate are both temperature-dependent. The accuracy of the LADM solutions is confirmed by comparing the results obtained for the temperature distribution within the plate with those reported in the literature based on the differential transformation method. Findings It is shown that the heat dissipated from the plate reduces as the Peclet number increases. By contrast, the dissipated heat increases as any one of the non-dimensionalized parameters of the system, i.e. Nc, Nr and B, increases. In addition, the temperature drop along the length of the plate reduces as parameter A increases owing to a more rapid heat transfer. Originality/value The results provide a useful source of reference for the choice of suitable materials and cooling fluids in a variety of practical applications.

Nonlinear singular one dimensional thermo-elasticity coupled system and double Laplace decomposition methods

Filomat ◽  
2017 ◽  
Vol 31 (20) ◽  
pp. 6269-6280
Author(s):  
Hassan Gadain
Keyword(s):  
Laplace Transform ◽  
Decomposition Method ◽  
Adomian Decomposition Method ◽  
Coupled System ◽  
Decomposition Methods ◽  
One Dimensional ◽  
Convergence Proof ◽  
Double Laplace Transform ◽  
Adomian Decomposition

In this work, combined double Laplace transform and Adomian decomposition method is presented to solve nonlinear singular one dimensional thermo-elasticity coupled system. Moreover, the convergence proof of the double Laplace transform decomposition method applied to our problem. By using one example, our proposed method is illustrated and the obtained results are confirmed.

scholarly journals Gaussons: optical solitons with log-law nonlinearity by Laplace–Adomian decomposition method

Open Physics ◽  
2020 ◽  
Vol 18 (1) ◽  
pp. 182-188
Author(s):  
O. González-Gaxiola ◽  
Anjan Biswas ◽  
Abdullah Kamis Alzahrani
Keyword(s):  
Numerical Simulations ◽  
Decomposition Method ◽  
Adomian Decomposition Method ◽  
Optical Solitons ◽  
Decomposition Scheme ◽  
Error Analyses ◽  
Adomian Decomposition ◽  
Log Law

AbstractThis paper presents optical Gaussons by the aid of the Laplace–Adomian decomposition scheme. The numerical simulations are presented both in the presence and in the absence of the detuning term. The error analyses of the scheme are also displayed.

Sign in / Sign up

Export Citation Format

Share Document