Turbulent Boundary Layers Over Surfaces Smoothed by Sanding

2003 ◽  
Vol 125 (5) ◽  
pp. 863-870 ◽  
Author(s):  
Michael P. Schultz ◽  
Karen A. Flack
Keyword(s):  
Boundary Layer ◽  
Skin Friction Coefficient ◽  
Laser Doppler Velocimeter ◽  
Reynolds Stresses ◽  
Smooth Wall ◽  
Mean Velocity ◽  
Towing Tank ◽  
The Mean ◽  
Stress Profiles ◽  
Similarity Law

Flat-plate turbulent boundary layer measurements have been made on painted surfaces, smoothed by sanding. The measurements were conducted in a closed return water tunnel, over a momentum thickness Reynolds number Reθ range of 3000 to 16,000, using a two-component laser Doppler velocimeter (LDV). The mean velocity and Reynolds stress profiles are compared with those for smooth and sandgrain rough walls. The results indicate an increase in the boundary layer thickness (δ) and the integral length scales for the unsanded, painted surface compared to a smooth wall. More significant increases in these parameters, as well as the skin-friction coefficient Cf were observed for the sandgrain surfaces. The sanded surfaces behave similarly to the smooth wall for these boundary layer parameters. The roughness functions ΔU+ for the sanded surfaces measured in this study agree within their uncertainty with previous results obtained using towing tank tests and similarity law analysis. The present results indicate that the mean profiles for all of the surfaces collapse well in velocity defect form. The Reynolds stresses also show good collapse in the overlap and outer regions of the boundary layer when normalized with the wall shear stress.

Turbulent Boundary Layers on Surfaces Covered With Filamentous Algae

2000 ◽  
Vol 122 (2) ◽  
pp. 357-363 ◽  
Author(s):  
Michael P. Schultz
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Turbulence Intensity ◽  
Reynolds Shear Stress ◽  
Skin Friction Coefficient ◽  
Laser Doppler Velocimeter ◽  
Mean Velocity ◽  
Rough Walls ◽  
The Mean ◽  
Stress Profiles

Turbulent boundary layer measurements have been made on surfaces covered with filamentous marine algae. These experiments were conducted in a closed return water tunnel using a two-component, laser Doppler velocimeter (LDV). The mean velocity profiles and parameters, as well as the axial and wall-normal turbulence intensities and Reynolds shear stress, are compared with flows over smooth and sandgrain rough walls. Significant increases in the skin friction coefficient for the algae-covered surfaces were measured. The boundary layer and integral thickness length scales were also increased. The results indicate that profiles of the turbulence quantities for the smooth and sandgrain rough walls collapse when friction velocity and boundary layer thickness are used as normalizing parameters. The algae-covered surfaces, however, exhibited a significant increase in the wall-normal turbulence intensity and the Reynolds shear stress, with only a modest increase in the axial turbulence intensity. The peak in the Reynolds shear stress profiles for the algae surfaces corresponded to the maximum extent of outward movement of the algae filaments. [S0098-2202(00)01902-7]

The Effect of Biofilms on Turbulent Boundary Layers

1999 ◽  
Vol 121 (1) ◽  
pp. 44-51 ◽  
Author(s):  
M. P. Schultz ◽  
G. W. Swain
Keyword(s):  
Boundary Layer ◽  
Friction Coefficient ◽  
Turbulent Boundary Layer ◽  
Skin Friction ◽  
Layer Structure ◽  
Reynolds Shear Stress ◽  
Skin Friction Coefficient ◽  
Laser Doppler Velocimeter ◽  
Reynolds Stresses ◽  
The Mean

Materials exposed in the marine environment, including those protected by antifouling paints, may rapidly become colonized by microfouling. This may affect frictional resistance and turbulent boundary layer structure. This study compares the mean and turbulent boundary layer velocity characteristics of surfaces covered with a marine biofilm with those of a smooth surface. Measurements were made in a nominally zero pressure gradient, boundary layer flow with a two-component laser Doppler velocimeter at momentum thickness Reynolds numbers of 5600 to 19,000 in a recirculating water tunnel. Profiles of the mean and turbulence velocity components, including the Reynolds shear stress, were measured. An average increase in the skin friction coefficient of 33 to 187 percent was measured on the fouled specimens. The skin friction coefficient was found to be dependent on both biofilm thickness and morphology. The biofilms tested showed varying effect on the Reynolds stresses when those quantities were normalized with the friction velocity.

LDA Measurements on Rough Turbulent Boundary Layers Subject to Strong Favorable Pressure Gradients

2006 ◽  
Author(s):  
Rau´l Bayoa´n Cal ◽  
Brian Brzek ◽  
Gunnar Johansson ◽  
Luciano Castillo
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Rough Surface ◽  
Reynolds Stress ◽  
Reynolds Stresses ◽  
Mean Velocity ◽  
Velocity Deficit ◽  
The Mean ◽  
Stress Profiles

Laser-Doppler anemometry (LDA) measurements of the mean velocity and Reynolds stresses are carried out on a rough surface favorable pressure gradient (FPG) turbulent boundary layer. These data is compared with smooth FPG turbulent boundary layer data possessing with the same strength of pressure gradient and also with rough zero pressure gradient (ZPG) data. The scales for the mean velocity deficit and Reynolds stresses are obtained through means of equilibrium similarity analysis of the RANS equations [1]. The mean velocity deficit profiles collapse, but to different curves when normalized using the free-stream velocity. The effects of the pressure gradient and roughness are clearly distinguished and separated. However, these effects are removed from the outer flow when the profiles are normalized using the Zagarola and Smits [2] scaling. It is also found that there is a clear effect of the roughness and pressure gradient on the Reynolds stresses. The Reynolds stress profiles augment due to the rough surface. Furthermore, the strength of the pressure gradient imposed of the flow changes the shape of the Reynolds stress profiles especially on the < v2 > and < uv > components. The rough surface influence is mostly noticed on the < u2 > component of the Reynolds stress, where the shape of the profiles change entirely. The boundary layer parameter δ*/δ shows the effects of the roughness and a dependence on the Reynolds number for the smooth FPG case. The pressure parameter, A, describes a development of the turbulent boundary layer and no influence of the roughness is linked with the parameter, k+. The boundary layers grow differently and depict the influence of the studied effects in their development. These measurements are the first of their nature due to the extensive number in downstream locations (12) and the combination of the studied external conditions (i.e., the strength of the pressure gradient and the surface roughness).

Turbulence Measurements Near the Stern of a Ship Model

1984 ◽  
Vol 28 (03) ◽  
pp. 186-201
Author(s):  
Lennart Löfdahl ◽  
Lars Larsson
Keyword(s):  
Boundary Layer ◽  
Strong Influence ◽  
Three Dimensional ◽  
Reynolds Stresses ◽  
Hot Wire ◽  
Calculation Methods ◽  
Mean Velocity ◽  
Ship Model ◽  
The Mean ◽  
Stress Profiles

An experimental investigation in which Reynolds stress profiles were measured in the thick three-dimensional turbulent boundary layer at the stern of a ship model has been carried out. The measurements were performed using a specially developed hot-wire technique in which the mean velocity component perpendicular to the surface was considered. A large number of results are given in diagrams, and an error estimation for the different Reynolds stresses is presented. Efforts have been made, when positioning the measured turbulence profiles, to enable future development of calculation methods based on these results. The measured profiles have revealed a strong influence of streamline convergence (divergence) on the Reynolds stresses. Also, the effects of wall curvature are of importance, and since most parts of the investigated region have a convex curvature the average level of the stresses is reduced.

scholarly journals EFFECT OF RIBLETS AND SUCTION ON A FLAT PLATE TURBULENT BOUNDARY LAYER

2006 ◽  
Vol 5 (1) ◽  
pp. 78
Author(s):  
M. O. Oyewola
Keyword(s):  
Boundary Layer ◽  
Flat Plate ◽  
Smooth Surface ◽  
Reynolds Stresses ◽  
Hot Wire ◽  
Smooth Wall ◽  
Mean Velocity ◽  
Layer Structures ◽  
Porous Strip ◽  
The Mean

This work presents hot-wire measurements in a flat plate turbulent boundarylayer, subjected to the combination of riblets and suction. The suction is applied through a porous strip for a range of suction rates. The effect of riblets and suction has been quantified through the measurements of mean velocity and Reynolds stresses downstream of the suction strip on the riblets surface. The results of the mean velocity and Reynolds stresses indicate that there is no significant change in the distributions of riblets and smooth wall. However, there exist some changes with the combination of suction and riblets relative to the smooth surface. These changes arise from the interference of suction with the mechanism of the layer. The results suggest that riblets may not alter the effect suction has on the boundary layer structures.

The turbulent boundary layer over transverse square cavities

1999 ◽  
Vol 395 ◽  
pp. 271-294 ◽  
Author(s):  
L. DJENIDI ◽  
R. ELAVARASAN ◽  
R. A. ANTONIA
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Flow Direction ◽  
Reynolds Shear Stress ◽  
Local Maximum ◽  
Turbulent Energy ◽  
Skin Friction Coefficient ◽  
Reynolds Stresses ◽  
Smooth Wall ◽  
Local Skin

Laser-induced uorescence (LIF) and laser Doppler velocimetry (LDV) are used to explore the structure of a turbulent boundary layer over a wall made up of two-dimensional square cavities placed transversely to the flow direction. There is strong evidence of occurrence of outflows of fluid from the cavities as well as inflows into the cavities. These events occur in a pseudo-random manner and are closely associated with the passage of near-wall quasi-streamwise vortices. These vortices and the associated low-speed streaks are similar to those found in a turbulent boundary layer over a smooth wall. It is conjectured that outflows play an important role in maintaining the level of turbulent energy in the layer and enhancing the approach towards self-preservation. Relative to a smooth wall layer, there is a discernible increase in the magnitudes of all the Reynolds stresses and a smaller streamwise variation of the local skin friction coefficient. A local maximum in the Reynolds shear stress is observed in the shear layers over the cavities.

Experimental Investigation of Turbulent Boundary Layers Under Favorable Pressure Gradient

2010 ◽  
Author(s):  
Pranav Joshi ◽  
Joseph Katz
Keyword(s):  
Boundary Layer ◽  
Friction Coefficient ◽  
Pressure Gradient ◽  
Skin Friction ◽  
Velocity Profiles ◽  
Skin Friction Coefficient ◽  
Mean Velocity ◽  
Freestream Velocity ◽  
Favorable Pressure Gradient ◽  
The Mean

The goal of this research is to study the effect of favorable pressure gradient (FPG) on the near wall structures of a turbulent boundary layer on a smooth wall. 2D-PIV measurements have been performed in a sink flow, initially at a coarse resolution, to characterize the development of the mean flow and (under resolved) Reynolds stresses. Lack of self-similarity of mean velocity profiles shows that the boundary layer does not attain the sink flow equilibrium. In the initial phase of acceleration, the acceleration parameter, K = v/U2dU/dx, increases from zero to 0.575×10−6, skin friction coefficient decreases and mean velocity profiles show a log region, but lack universality. Further downstream, K remains constant, skin friction coefficient increases and the mean velocity profiles show a second log region away from the wall. In the initial part of the FPG region, all the Reynolds stress components decrease over the entire boundary layer. In the latter phase, they continue to decrease in the middle of the boundary layer, and increase significantly close to the wall (below y∼0.15δ), where they collapse when normalized with the local freestream velocity. Turbulence production and wallnormal transport, scaled with outer units, show self-similar profiles close to the wall in the constant K region. Spanwise-streamwise plane data shows evidence of low speed streaks in the log layer, with widths scaling with the boundary layer thickness.

Separated and Reattached Flow Over Square, Rectangular and Semi-Circular Blocks

2007 ◽  
Author(s):  
M. Agelinchaab ◽  
M. F. Tachie
Keyword(s):  
Boundary Layer ◽  
Cross Sections ◽  
Recirculation Region ◽  
Reynolds Stresses ◽  
Mean Velocity ◽  
Block Height ◽  
Turbulent Statistics ◽  
Image Velocimetry ◽  
The Mean ◽  
Separated And Reattached Flow

A particle image velocimetry is used to study the characteristics of separated and reattached turbulent flow over two-dimensional transverse blocks of square, rectangular and semi-circular cross-sections fixed to the bottom wall of an open channel. The ratio of upstream boundary layer thickness to block height is considerably higher than in prior studies. The results show that the mean and turbulent statistics in the recirculation region and downstream of reattachment are significantly different from the upstream boundary layer. The variation of the Reynolds stresses along the separating streamlines is discussed within the context of vortex stretching, longitudinal strain rate and wall damping. It appears wall damping is a more dominant mechanism in the vicinity of reattachment. The levels of turbulence diffusion and production by the normal stresses are significantly higher than in classical turbulent boundary layers. The bulk of turbulence production occurs in mid-layer and transported into the inner and outer layers. The results also reveal that the curvature of separating streamline, separating bubble beneath it as well as the mean velocity and turbulent quantities depend strongly on block geometry.

Scaling of Favorable Pressure Gradient Turbulent Boundary Layers With Eventual Relaminarization

2005 ◽  
Author(s):  
Rau´l Bayoa´n Cal ◽  
Xia Wang ◽  
Luciano Castillo
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Reynolds Shear Stress ◽  
Velocity Profiles ◽  
Turbulent Boundary Layers ◽  
Reynolds Stresses ◽  
Mean Velocity ◽  
Favorable Pressure Gradient ◽  
The Mean

Applying similarity analysis to the RANS equations of motion for a pressure gradient turbulent boundary layer, Castillo and George [1] obtained the scalings for the mean deficit velocity and the Reynolds stresses. Following this analysis, Castillo and George studied favorable pressure gradient (FPG) turbulent boundary layers. They were able to obtain a single curve for FPG flows when scaling the mean deficit velocity profiles. In this study, FPG turbulent boundary layers are analyzed as well as relaminarized boundary layers subjected to an even stronger FPG. It is found that the mean deficit velocity profiles diminish when scaled using the Castillo and George [1] scaling, U∞, and the Zagarola and Smits [2] scaling, U∞δ*/δ. In addition, Reynolds stress data has been analyzed and it is found that the relaminarized boundary layer data decreases drastically in all components of the Reynolds stresses. Furthermore, it will be shown that the shape of the profile for the wall-normal and Reynolds shear stress components change drastically given the relaminarized state. Therefore, the mean velocity deficit profiles as well as Reynolds stresses are found to be necessary in order to understand not only FPG flows, but also relaminarized boundary layers.

Measurement of the Reynolds stresses and the mean-flow field in a three-dimensional pressure-driven boundary layer

1982 ◽  
Vol 119 ◽  
pp. 121-153 ◽  
Author(s):  
Udo R. Müller
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Flow Field ◽  
Three Dimensional ◽  
Turbulent Shear ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Mean Velocity ◽  
Flow Acceleration ◽  
The Mean

An experimental study of a steady, incompressible, three-dimensional turbulent boundary layer approaching separation is reported. The flow field external to the boundary layer was deflected laterally by turning vanes so that streamwise flow deceleration occurred simultaneous with cross-flow acceleration. At 21 stations profiles of the mean-velocity components and of the six Reynolds stresses were measured with single- and X-hot-wire probes, which were rotatable around their longitudinal axes. The calibration of the hot wires with respect to magnitude and direction of the velocity vector as well as the method of evaluating the Reynolds stresses from the measured data are described in a separate paper (Müller 1982, hereinafter referred to as II). At each measuring station the wall shear stress was inferred from a Preston-tube measurement as well as from a Clauser chart. With the measured profiles of the mean velocities and of the Reynolds stresses several assumptions used for turbulence modelling were checked for their validity in this flow. For example, eddy viscosities for both tangential directions and the corresponding mixing lengths as well as the ratio of resultant turbulent shear stress to turbulent kinetic energy were derived from the data.

Sign in / Sign up

Export Citation Format

Share Document