scholarly journals Another Approach to Wind

2004 ◽  
Vol 126 (06) ◽  
pp. 28-31 ◽  
Author(s):  
Steven Peace
Keyword(s):  
Wind Turbine ◽  
Centrifugal Force ◽  
Power Output ◽  
Vertical Axis ◽  
Horizontal Axis ◽  
Masonry Structures ◽  
Horizontal Axis Wind Turbine ◽  
Industrial Cities ◽  
Swept Area

This article highlights how vertical-axis turbines may avoid the limitations of today’s standard propeller-like machines. Horizontal-axis wind turbine technology is likely to peak in the next few years, largely because of the limitations of the blades and their effects on the machine. The power output of a wind turbine is directly related to the swept area of its blades. The larger the diameter, the more power it is capable of extracting from the wind. The larger the blades, the stronger they need to be to withstand the higher levels of centrifugal force and stresses caused by their additional size and weight. Tall masonry structures of the sort that are suitable for the Eurowind turbines were once a common sight in industrial cities and towns across the globe. However, as technology changed, many of these structures became obsolete. Indeed, the structures have lent their name to an entire subset of old-fashioned, low-tech businesses in smokestack industries.

scholarly journals Comparison of horizontal axis wind turbine (HAWT) and vertical axis wind turbine (VAWT)

2018 ◽  
Vol 7 (4.13) ◽  
pp. 74 ◽  
Author(s):  
Muhd Khudri Johari ◽  
Muhammad Azim A Jalil ◽  
Mohammad Faizal Mohd Shariff
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Green Technology ◽  
Horizontal Axis ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Current Output ◽  
Voltage Output ◽  
And Performance

As the demand for green technology is rising rapidly worldwide, it is important that Malaysian researchers take advantage of Malaysia’s windy climates and areas to initiate more power generation projects using wind. The main objectives of this study are to build a functional wind turbine and to compare the performance of two types of design for wind turbine under different speeds and behaviours of the wind. A three-blade horizontal axis wind turbine (HAWT) and a Darrieus-type vertical axis wind turbine (VAWT) have been designed with CATIA software and constructed using a 3D-printing method. Both wind turbines have undergone series of tests before the voltage and current output from the wind turbines are collected. The result of the test is used to compare the performance of both wind turbines that will imply which design has the best efficiency and performance for Malaysia’s tropical climate. While HAWT can generate higher voltage (up to 8.99 V at one point), it decreases back to 0 V when the wind angle changes. VAWT, however, can generate lower voltage (1.4 V) but changes in the wind angle does not affect its voltage output at all. The analysis has proven that VAWT is significantly more efficient to be built and utilized for Malaysia’s tropical and windy climates. This is also an initiative project to gauge the possibility of building wind turbines, which could be built on the extensive and windy areas surrounding Malaysian airports.  

scholarly journals PENGARUH JUMLAH BLADE DAN VARIASI PANJANG CHORD TERHADAP PERFORMANSI TURBIN ANGIN SUMBU HORIZONTAL (TASH)

2014 ◽  
Vol 4 (2) ◽  
Author(s):  
I Kade Wiratama ◽  
Made Mara ◽  
L. Edsona Furqan Prina
Keyword(s):  
Wind Turbine ◽  
Energy Use ◽  
Electrical Energy ◽  
Vertical Axis ◽  
Energy System ◽  
Horizontal Axis ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine

The willingness of electrical energy is one energy system has a very important role in the economic development of a country's survival. As one energy source (wind) can be converted into electrical energy with the use of a horizontal axis wind turbine. Wind Energy Conversion Systems (WECS) that we know are two wind turbines in general, ie the horizontal axis wind turbine and vertical axis wind turbine is one type of renewable energy use wind as an energy generator. The purpose of this study was to determine the effect of the number of blade and the radius chord of rotation (n), Torque (T), Turbine Power (P), Power Coefficient (CP) and Tip Speed Ratio (λ) generated by the horizontal axis wind turbine with form linear taper. The results show that by at the maximum radius of the chord R3 the number blade 4 is at rotation = 302.700 rpm, Pturbine = 7.765 watt, Torque = 0.245 Nm, λ = 3.168 and Cp = 0.403 or 40.3%.

scholarly journals Influence of the Heights of Low-Level Jets on Power and Aerodynamic Loads of a Horizontal Axis Wind Turbine Rotor

Atmosphere ◽  
2019 ◽  
Vol 10 (3) ◽  
pp. 132 ◽  
Author(s):  
Xuyao Zhang ◽  
Congxin Yang ◽  
Shoutu Li
Keyword(s):  
Wind Speed ◽  
Power Spectrum ◽  
Wind Turbine ◽  
Horizontal Axis ◽  
Horizontal Axis Wind Turbine ◽  
Aerodynamic Loads ◽  
Low Level ◽  
Low Level Jets ◽  
Inflow Conditions ◽  
Swept Area

The influence of the heights of low-level jets (LLJs) on the rotor power and aerodynamic loads of a horizontal axis wind turbine were investigated using the fatigue, aerodynamics, structures, and turbulence code. The LLJ and shear inflow wind fields were generated using an existing wind speed spectral model. We found that the rotor power predicted by the average wind speed of the hub height is higher than the actual power in relatively weak and shallow LLJ inflow conditions, especially when the LLJ height is located inside the rotor-swept area. In terms of aerodynamic loads, when the LLJ height is located inside the rotor-swept area, the root mean square (RMS) rotor thrust coefficient and torque coefficient increase, while the RMS rotor unbalanced aerodynamic load coefficients, including lateral force, longitudinal force, tilt moment, and yaw moment, decreased. This means that the presence of both positive and negative wind shear in the rotor-swept area not only increases the rotor power but also reduces the unbalanced aerodynamic loads, which is beneficial to the operation of wind turbine. Power spectrum analysis shows no obvious difference in the power spectrum characteristics of the rotor torque and thrust in LLJ inflow conditions with different heights.

scholarly journals A vertical-axis rotor as the adjusting system of a horizontal axis wind turbine

2020 ◽  
pp. 1-14
Author(s):  
Marcin Augustyn
Keyword(s):  
Boundary Layer ◽  
Wind Turbine ◽  
Vertical Axis ◽  
Computational Procedure ◽  
Horizontal Axis ◽  
The Self ◽  
Main Rotor ◽  
Aerodynamic Coefficients ◽  
Horizontal Axis Wind Turbine ◽  
Design Structure

The proposed self-adjusting mechanism consists of a carousel rotor with a vertical axis consisting of two kinematically connected flat blades. The torque of this rotor can change the position of the directing unit and additionally the position of the main propeller in order to direct the wind stream or save the main rotor when the wind is too strong. The theory, principles of operation, and the properties of the self-adjusting system were illustrated by formulas and graphs. Based on research conducted in a boundary layer wind tunnel, the values of the aerodynamic coefficients of the flat blades were determined, and then the power and propeller torque of the rotor were found as a function of the angle of wind attack. A computational procedure provides kinematical and force relations as well as the resulting torque diagrams of the rotor. An example of the use and the design structure of a self-adjusting unit in the case of a horizontal axis wind turbine is presented.

scholarly journals Wake Effect of a Horizontal Axis Wind Turbine on the Performance of a Downstream Turbine

Energies ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2395 ◽  
Author(s):  
Haojun Tang ◽  
Kit-Ming Lam ◽  
Kei-Man Shum ◽  
Yongle Li
Keyword(s):  
Wind Turbine ◽  
Tangential Velocity ◽  
Streamwise Velocity ◽  
Horizontal Axis ◽  
Wake Flow ◽  
Wake Effect ◽  
Horizontal Axis Wind Turbine ◽  
Small Pitch ◽  
Swept Area ◽  
Wake Characteristics

This paper presents wind tunnel tests on the wake characteristics of a three-blade horizontal axis wind turbine and the wake effect on the performance of a downstream turbine. For a single turbine model, the performance was determined and this was followed by measurement of the wind characteristics including velocities, turbulence intensities, and correlation in the wake flow field. Subsequently, taking two horizontal axis wind turbines in a tandem arrangement into account, their performance was tested and the aerodynamic mechanism was discussed. The results showed that the upstream turbine with blades set at a small pitch angle provided smaller disturbance to the flow, but as the blade turned faster, larger changes in the velocity and the turbulence intensity occurred in its wake due to the more frequent disturbance of the wind turbine. The correlation of wake velocities in the turbine swept area also obviously decreased from the free-stream situation. For the downstream turbine, the output power loss largely depended on the wake characteristics of the upstream turbine, which was closely related to lower wind velocities or higher turbulence intensities. The decrease in correlation of the streamwise velocity within the blade swept area is accompanied by the increased correlation of the tangential velocity, which may be beneficial to the downstream turbine’s performance.

CFD Calculation of Wind Turbines Power Variations in Urban Areas

2012 ◽  
Vol 622-623 ◽  
pp. 1084-1088
Author(s):  
Jafar Bazrafshan ◽  
Payam Sabaeifard ◽  
Farid Khalafi ◽  
Majid Jamil
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Power Output ◽  
Urban Areas ◽  
Stokes Equations ◽  
Horizontal Axis ◽  
Navier Stokes ◽  
Horizontal Axis Wind Turbine ◽  
Navier Stokes Equations ◽  
Cfd Method

Integrating wind turbines in urban areas especially over buildings is a new way of producing electricity which is supported in recent years. Wind turbines sited well above the roof of buildings operate in skewed flow. In this paper, to examine variations in efficiency of wind turbines in this condition, two models of H-Rotor and horizontal axis wind turbine analyzed based on axial momentum theory through computer simulations. Simulations conducted through CFD method and k-ε turbulence model was utilized to analyze flow fluctuations in Navier-Stokes equations. Models show that, for an H-Rotor, the optimal power output in tilted flow can be up to two times the power output of horizontal axis wind turbine (HAWT).

Sign in / Sign up

Export Citation Format

Share Document