An Instant Center Approach Toward the Conceptual Design of Compliant Mechanisms

2005 ◽  
Vol 128 (3) ◽  
pp. 542-550 ◽  
Author(s):  
Charles J. Kim ◽  
Sridhar Kota ◽  
Yong-Mo Moon
Keyword(s):  
Conceptual Design ◽  
Building Block ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Geometry Optimization ◽  
Building Blocks ◽  
Cross Sectional ◽  
Rigid Body Model ◽  
Cross Sectional Size

As with conventional mechanisms, the conceptual design of compliant mechanisms is a blend of art and science. It is generally performed using one of two methods: topology optimization or the pseudo-rigid-body model. In this paper, we present a new conceptual design methodology which utilizes a building block approach for compliant mechanisms performing displacement amplification/attenuation. This approach provides an interactive, intuitive, and systematic methodology for generating initial compliant mechanism designs. The instant center is used as a tool to construct the building blocks. The compliant four-bar building block and the compliant dyad building block are presented as base mechanisms for the conceptual design. It is found that it is always possible to obtain a solution for the geometric advantage problem with an appropriate combination of these building blocks. In a building block synthesis, a problem is first evaluated to determine if any known building blocks can satisfy the design specifications. If there are none, the problem is decomposed to a number of sub-problems which may be solved with the building blocks. In this paper, the problem is decomposed by selecting a point in the design space where the output of the first building block coincides with the second building block. Two quantities are presented as tools to aid in the determination of the mechanism's geometry – (i) an index relating the geometric advantage of individual building blocks to the target geometric advantage and (ii) the error in the geometric advantage predicted by instant centers compared to the calculated value from FEA. These quantities guide the user in the selection of the location of nodes of the mechanism. Determination of specific cross-sectional size is reserved for subsequent optimization. An example problem is provided to demonstrate the methodology's capacity to obtain good initial designs in a straightforward manner. A size and geometry optimization is performed to demonstrate the viability of the design.

An Instant Center Approach to the Conceptual Design of Compliant Mechanisms

2004 ◽  
Author(s):  
Charles J. Kim ◽  
Sridhar Kota ◽  
Yong-Mo Moon
Keyword(s):  
Conceptual Design ◽  
Building Block ◽  
Design Methodology ◽  
Compliant Mechanisms ◽  
Geometry Optimization ◽  
Quantitative Measure ◽  
Building Blocks ◽  
Rigid Body Model ◽  
Base Mechanism ◽  
Block Approach

The conceptual design of compliant mechanisms is generally performed using one of two methods: topology optimization or the Pseudo-Rigid-Body Model. In this paper, we present a conceptual design methodology which utilizes a building block approach. The concept of the instant center is developed for compliant mechanisms and is used to characterize the building blocks. The building block characterization is used in guiding the problem decomposition. The compliant four-bar building block is presented as a base mechanism for the conceptual design. The geometric advantage is used as a quantitative measure to guide the designer in determining the shape of the building block. An example problem demonstrates the methodology’s capacity to obtain viable conceptual designs in a straightforward manner. Resulting mechanisms satisfy initial kinematic requirements and are ready for further refinement using size and geometry optimization.

Classification of Compliant Mechanisms and Determination of the Degrees of Freedom Using the Concepts of Compliance Number and Pseudo-Rigid-Body Model

2019 ◽  
Author(s):  
Pratheek Bagivalu Prasanna ◽  
Ashok Midha ◽  
Sushrut G. Bapat
Keyword(s):  
Rigid Body ◽  
Degrees Of Freedom ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Body Model ◽  
Active Compliance ◽  
Kinematic Behavior ◽  
Rigid Body Model

Abstract Understanding the kinematic properties of a compliant mechanism has always proved to be a challenge. A concept of compliance number offered earlier emphasized the development of terminology that aided in its determination. A method to evaluate the elastic degrees of freedom associated with the flexible segments/links of a compliant mechanism using the pseudo-rigid-body model (PRBM) concept is provided. In this process, two distinct classes of compliant mechanisms are developed involving: (i) Active Compliance and (ii) Passive Compliance. Furthermore, these also aid in a better characterization of the kinematic behavior of a compliant mechanism. A more lucid interpretation of the significance of compliance number is provided. Applications of this method to both active and passive compliant mechanisms are exemplified. Finally, an experimental procedure that aids in visualizing the degrees of freedom as calculated is presented.

Conceptual Synthesis of Compliance at a Single Point

2006 ◽  
Author(s):  
Charles Kim ◽  
Yong-Mo Moon ◽  
Sridhar Kota
Keyword(s):  
Building Block ◽  
Compliant Mechanism ◽  
Single Point ◽  
Geometry Optimization ◽  
Building Blocks ◽  
Kinematic Behavior ◽  
The Mathematical Model ◽  
Insight Into ◽  
Block Approach

In this paper, we investigate a methodology for the conceptual synthesis of compliance at a single point based on a building block approach. The methodology lays the foundation for more general compliant mechanism synthesis problems involving multiple points of interest (i.e. inputs and outputs). In the building block synthesis, the problem specifications are decomposed into related sub-problems if a single building block cannot perform the desired task. The sub-problems are tested against the library of building blocks until a suitable building block is determined. The synthesized design is composed of an assembly of the building blocks to provide the desired functionality. The building block approach is intuitive and provides key insight into how individual building blocks contribute to the overall function. We investigate the basic kinematic behavior of individual building blocks and relate this to the behavior of a design composed of building blocks. This serves to not only generate viable solutions but also to augment the understanding of the designer. Once a feasible concept is thus generated, known methods for size and geometry optimization may be employed to fine tune performance. The key enabler of the building block synthesis is the method of capturing kinematic behavior using Compliance Ellipsoids. The mathematical model of the compliance ellipsoids facilitates the characterization of the building blocks, transformation of problem specifications, decomposition into sub-problems, and the ability to search for alternate solutions. The compliance ellipsoids also give insight into how individual building blocks contribute to the overall kinematic function. The effectiveness and generality of the methodology are demonstrated through a synthesis example. Using only a limited set of building blocks, the methodology is capable of addressing generic kinematic problem specifications.

Design Synthesis of 2-D Compliant Mechanisms Utilizing Serial Concatenation of Building Blocks

2009 ◽  
Author(s):  
Girish Krishnan ◽  
Charles Kim ◽  
Sridhar Kota
Keyword(s):  
Building Block ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Building Blocks ◽  
Unique Point ◽  
Compliance Matrix ◽  
Design Synthesis ◽  
Parametric Variation ◽  
Point Of Interest

In this section we implement a characterization based on eigen-twists and eigen-wrenches for the deformation of a compliant mechanism at a given point of interest. For 2-D mechanisms, this involves characterizing the compliance matrix at a unique point called the center of elasticity. At the center of elasticity, the translation and rotational compliances are decoupled. We give an intuitive graphical understanding of compliance at this point by representing the translational compliance as an ellipse and the coupling between the translational and rotational parameters as vectors (Coupling vectors). This representation gives us an intuitive understanding of series and parallel combination of building blocks. We obtain a parametric variation of these quantities for a compliant dyad building block, and show with examples how a mechanism can be synthesized by a combination of building blocks to obtain desired deformation requirements. We also propose a combination of series and parallel concatenation to achieve more than one specification simultaneously. Such a characterization can be extended to synthesize involving multiple ports.

Functional Characterization of Compliant Building Blocks Utilizing Eigentwists and Eigenwrenches

2008 ◽  
Author(s):  
Charles J. Kim
Keyword(s):  
Building Block ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Deformable Body ◽  
Functional Characterization ◽  
Building Blocks ◽  
Future Research ◽  
Special Cases ◽  
Block Approach

Compliant mechanisms are devices which utilize the flexibility of their constituent members to transmit motion and forces. Unlike their rigid body counterparts, compliant mechanisms typically contain no traditional joints. The focus of this research is the development of a building block approach for the synthesis of compliant mechanisms. Building block methods better facilitate the augmentation of designer intuition while offering a systematic approach to open-ended problems. In this paper, we investigate the use of the eigentwists and eigenwrenches of a deformable body to characterize basic kinematic function. The eigentwists and eigenwrenches are shown to demonstrate parametric behavior when applied to the compliant dyad building block, and in special cases may be compared to compliance ellipsoids. The paper concludes by articulating future research in a building block approach to compliant mechanism synthesis.

Conceptual designs of multi-degree of freedom compliant parallel manipulators composed of wire-beam based compliant mechanisms

2014 ◽  
Vol 229 (3) ◽  
pp. 538-555 ◽  
Author(s):  
Guangbo Hao ◽  
Haiyang Li
Keyword(s):  
Rigid Body ◽  
Building Block ◽  
Compliant Mechanisms ◽  
Building Blocks ◽  
Parallel Manipulators ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Conceptual Designs ◽  
Rigid Body Model ◽  
Block Based

This paper proposes conceptual designs of multi-degree(s) of freedom (DOF) compliant parallel manipulators (CPMs) including 3-DOF translational CPMs and 6-DOF CPMs using a building block based pseudo-rigid-body-model (PRBM) approach. The proposed multi-DOF CPMs are composed of wire-beam based compliant mechanisms (WBBCMs) as distributed-compliance compliant building blocks (CBBs). Firstly, a comprehensive literature review for the design approaches of compliant mechanisms is conducted, and a building block based PRBM is then presented, which replaces the traditional kinematic sub-chain with an appropriate multi-DOF CBB. In order to obtain the decoupled 3-DOF translational CPMs (XYZ CPMs), two classes of kinematically decoupled 3-PPPR (P: prismatic joint, R: revolute joint) translational parallel mechanisms (TPMs) and 3-PPPRR TPMs are identified based on the type synthesis of rigid-body parallel mechanisms, and WBBCMs as the associated CBBs are further designed. Via replacing the traditional actuated P joint and the traditional passive PPR/PPRR sub-chain in each leg of the 3-DOF TPM with the counterpart CBBs (i.e. WBBCMs), a number of decoupled XYZ CPMs are obtained by appropriate arrangements. In order to obtain the decoupled 6-DOF CPMs, an orthogonally-arranged decoupled 6-PSS (S: spherical joint) parallel mechanism is first identified, and then two example 6-DOF CPMs are proposed by the building block based PRBM method. It is shown that, among these designs, two types of monolithic XYZ CPM designs with extended life have been presented.

A Building Block Approach to the Conceptual Synthesis of Compliant Mechanisms Utilizing Compliance and Stiffness Ellipsoids

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Charles J. Kim ◽  
Yong-Mo Moon ◽  
Sridhar Kota
Keyword(s):  
Building Block ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Single Point ◽  
Rapid Prototype ◽  
Building Blocks ◽  
Single Input Single Output ◽  
Kinematic Behavior ◽  
Insight Into ◽  
Block Approach

In this paper, we investigate a methodology for the conceptual synthesis of compliant mechanisms based on a building block approach. The building block approach is intuitive and provides key insight into how individual building blocks contribute to the overall function. We investigate the basic kinematic behavior of individual building blocks and relate this to the behavior of a design composed of building blocks. This serves to not only generate viable solutions but also to augment the understanding of the designer. Once a feasible concept is thus generated, known methods for size and geometry optimization may be employed to fine-tune performance. The key enabler of the building block synthesis is the method of capturing kinematic behavior using compliance ellipsoids. The mathematical model of the compliance ellipsoids facilitates the characterization of the building blocks, transformation of problem specifications, decomposition into subproblems, and the ability to search for alternate solutions. The compliance ellipsoids also give insight into how individual building blocks contribute to the overall kinematic function. The effectiveness and generality of the methodology are demonstrated through two synthesis examples. Using only a limited set of building blocks, the methodology is capable of addressing generic kinematic problem specifications for compliance at a single point and for a single-input, single-output compliant mechanism. A rapid prototype of the latter demonstrates the validity of the conceptual solution.

A Lumped-Model Based Building-Block Concatenation for a Conceptual Compliant Mechanism Synthesis

2008 ◽  
Author(s):  
Girish Krishnan ◽  
Charles Kim ◽  
Sridhar Kota
Keyword(s):  
Building Block ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Building Blocks ◽  
Mechanical Efficiency ◽  
Size Optimization ◽  
Lumped Model ◽  
Storage Mechanism ◽  
Conceptual Designs ◽  
Motion Characteristics

Present building-block synthesis techniques for compliant mechanisms [4–7] account for the kinematic behavior of the mechanism alone, leaving the stiffness, manufacturability and mechanical efficiency to be determined by the shape-size optimization process. In this effort, we aim to generate practical and feasible conceptual designs by designing for kinematics and stiffness simultaneously. To enable this, we use a lumped spring-lever model, which intuitively characterizes the stiffness and the kinematics of a deformable-complaint building block with distinct input and output points. This model aids in the understanding of how the stiffness and the kinematics of building blocks combine when concatenated to form a mechanism. We use this understanding to synthesize compliant mechanisms by combining building blocks of known motion characteristics. A simple compliant-dyad building block is characterized for its lumped values of stiffness and kinematics. The concatenation of these dyad-building blocks is solved in detail, and guidelines for conceptual synthesis are proposed. Two practical examples are solved; a motion amplifier for a piezo-stack and a compliant energy storage mechanism for a staple-gun. The conceptual designs obtained from this approach are very close to the kinematic and the stiffness requirements of the application, thus minimizing the role of shape and size optimization to achieve the problem specification. The model, when extended to higher dimensions may be used to solve for precision positioning and other applications.

A Flexible-Link Model for Compliant Member Synthesis

2006 ◽  
Author(s):  
Ahmad Smaili ◽  
Mazen Hassanieh
Keyword(s):  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Elliptic Integral ◽  
New Approach ◽  
Proposed Model ◽  
Gradient Optimization ◽  
Rigid Body Model ◽  
Optimum Solution ◽  
Nonlinear Deformations

A new approach for the synthesis of a compliant link experiencing nonlinear deformations is herein introduced. The model is being proposed as an alternative to the pseudo-rigid-body model widely used in compliant mechanisms synthesis. The proposed approach is based on the exact elliptic integral equations that govern beam deformations. The model entails the determination of a few parameters in an optimum sense that would move the endpoint of the beam through several desired positions with minimal error. A tabu-gradient optimization algorithm is employed to search the design space for an optimum solution that minimizes the square of the error between the desired and the generated endpoint positions while satisfying a set of relevant constraints. Attributes of the model are highlighted by way of several examples. A brief outline on how the proposed model is used as the basis for compliant mechanism synthesis is presented and demonstrated by way of two examples.

A Building Block Approach for the Design of Statically Balanced Compliant Mechanisms

2009 ◽  
Author(s):  
Karin Hoetmer ◽  
Just L. Herder ◽  
Charles J. Kim
Keyword(s):  
Building Block ◽  
Force Feedback ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Building Blocks ◽  
Negative Stiffness ◽  
High Fidelity ◽  
Input Output ◽  
Input And Output ◽  
Block Approach

Particularly when high-fidelity force feedback is required, such as in surgical forceps, the energy loss between input and output in compliant mechanisms is undesired. To restore the force feedback, the principle of static balancing can be applied, where a balancing segment with a negative stiffness is added to a compliant mechanism. Currently there are no mature methods for the design of statically balanced compliant mechanisms (SBCM). The goal of this paper is to investigate the possibility of extending the Building Block Approach for the design of statically balanced compliant mechanisms. To this end, the Building Block Approach is extended with negative stiffness balancing building blocks that can be added to a designed compliant mechanism. To demonstrate the feasibility of the method, a statically balanced compliant gripper was designed by this Extended Building Block Approach. The maximum operating force of the unbalanced gripper of 3.5 N was reduced to −1 N for the balanced gripper. Thus, the gripper is slightly overbalanced. The gripper example demonstrates the functionality of the proposed method; the input-output stiffness of a compliant mechanism can be severely reduced by a balancing segment.

Sign in / Sign up

Export Citation Format

Share Document