scholarly journals Steady-Periodic Green’s Functions and Thermal-Measurement Applications in Rectangular Coordinates

2005 ◽  
Vol 128 (7) ◽  
pp. 709-716 ◽  
Author(s):  
Kevin D. Cole
Keyword(s):  
Heat Transfer ◽  
Thermal Property ◽  
Green's Functions ◽  
Green’S Functions ◽  
Two Dimensional ◽  
Transfer Theory ◽  
Heat Transfer Theory ◽  
Rectangular Coordinates ◽  
Alternate Forms ◽  
Verification Techniques

Methods of thermal property measurements based on steady-periodic heating are indirect techniques, in which the thermal properties are deduced from a systematic comparison between experimental data and heat-transfer theory. In this paper heat-transfer theory is presented for a variety of two-dimensional geometries applicable to steady-periodic thermal-property techniques. The method of Green’s functions is used to systematically treat rectangles, slabs (two dimensional), and semi-infinite bodies. Several boundary conditions are treated, including convection and boundaries containing a thin, high-conductivity film. The family of solutions presented here provides an opportunity for verification of numerical results by the use of distinct, but similar, geometries. A second opportunity for verification arises from alternate forms of the Green’s function, from which alternate series expressions may be constructed for the same unique temperature solution. Numerical examples are given to demonstrate both verification techniques for the steady-periodic response to a heated strip.

scholarly journals Steady-Periodic Green’s Functions and Thermal-Measurement Applications in Rectangular Coordinates

2005 ◽  
Author(s):  
Kevin D. Cole
Keyword(s):  
Heat Transfer ◽  
Green's Functions ◽  
Green’S Functions ◽  
Two Dimensional ◽  
Thermal Measurement ◽  
Numerical Examples ◽  
Independent Verification ◽  
Rectangular Coordinates ◽  
Alternate Forms ◽  
Periodic Heat

Two-dimensional steady-periodic heat transfer in rectangles, slabs, and semi-infinite bodies is treated with the method of Green’s functions. The application is the measurement of thermal properties. Several types of boundary conditions are treated systematically, including convection conditions and boundaries containing a thin, high-conductivity film. Alternate forms of the Green’s function are given for several geometries, which allow for independent verification of numerical values. The method may be extended to multilayer bodies. Numerical examples are given for the steady-periodic response to a strip heater.

Temperature field evaluation of a two-dimensional partial heat flow problem through Green's Functions

2019 ◽  
Author(s):  
Guilherme Ramalho Costa ◽  
José Aguiar santos junior ◽  
José Ricardo Ferreira Oliveira ◽  
Jefferson Gomes do Nascimento ◽  
Gilmar Guimaraes
Keyword(s):  
Temperature Field ◽  
Heat Flow ◽  
Green's Functions ◽  
Flow Problem ◽  
Green’S Functions ◽  
Field Evaluation ◽  
Two Dimensional

Scalable Heat Transfer Characterization on Film Cooled Geometries Based on Discrete Green’s Functions

2020 ◽  
Author(s):  
Jorge Saavedra ◽  
Venkat Athmanathan ◽  
Guillermo Paniagua ◽  
Terrence Meyer ◽  
Doug Straub ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Flat Plate ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Green's Functions ◽  
Green’S Functions ◽  
Numerical Procedure ◽  
Local Heat Transfer ◽  
Sensitivity Matrix

Abstract The aerothermal characterization of film cooled geometries is traditionally performed at reduced temperature conditions, which then requires a debatable procedure to scale the convective heat transfer performance to engine conditions. This paper describes an alternative engine-scalable approach, based on Discrete Green’s Functions (DGF) to evaluate the convective heat flux along film cooled geometries. The DGF method relies on the determination of a sensitivity matrix that accounts for the convective heat transfer propagation across the different elements in the domain. To characterize a given test article, the surface is discretized in multiple elements that are independently exposed to perturbations in heat flux to retrieve the sensitivity of adjacent elements, exploiting the linearized superposition. The local heat transfer augmentation on each segment of the domain is normalized by the exposed thermal conditions and the given heat input. The resulting DGF matrix becomes independent from the thermal boundary conditions, and the heat flux measurements can be scaled to any conditions given that Reynolds number, Mach number, and temperature ratios are maintained. The procedure is applied to two different geometries, a cantilever flat plate and a film cooled flat plate with a 30 degree 0.125” cylindrical injection orifice with length-to-diameter ratio of 6. First, a numerical procedure is applied based on conjugate 3D Unsteady Reynolds Averaged Navier Stokes simulations to assess the applicability and accuracy of this approach. Finally, experiments performed on a flat plate geometry are described to validate the method and its applicability. Wall-mounted thermocouples are used to monitor the surface temperature evolution, while a 10 kHz burst-mode laser is used to generate heat flux addition on each of the discretized elements of the DGF sensitivity matrix.

Analysis of Temperature Field Based on Hollow Sucker Rod Hot Flushing Technology

2014 ◽  
Vol 1073-1076 ◽  
pp. 2257-2262
Author(s):  
Jie Yu Du ◽  
Jiang Xie ◽  
Yu Qi Zhao ◽  
Li Peng Zhang ◽  
Rui Bin Zhu
Keyword(s):  
Heat Transfer ◽  
Temperature Field ◽  
Low Pressure ◽  
Calculation Model ◽  
Simulation System ◽  
Well Production ◽  
Transfer Theory ◽  
Heat Transfer Theory ◽  
Sucker Rod ◽  
Theory Calculation

The hot flushing is a major means of removing wax. For low pressure reservoir, it is possible to produce a large number of washing fluid flowing into the formation, which affects the well production recovery. The application of hollow sucker rod hot flushing technology can avoid fluid pouring back into the formation, and the wells can keep production. Based on the principle of hollow sucker rod hot flushing and heat transfer theory, calculation model of temperature field was established, and hollow sucker rod hot flushing simulation system was developed, which can guide flushing in oilfield.

scholarly journals Solving bio-heat transfer multi-layer equation using Green’s Functions method

2021 ◽  
Vol 2090 (1) ◽  
pp. 012150
Author(s):  
de Oliveira Eduardo Peixoto ◽  
Gilmar Guimaräes
Keyword(s):  
Heat Transfer ◽  
Green's Functions ◽  
Green’S Functions ◽  
Transfer Problem ◽  
Blood Perfusion ◽  
The Body ◽  
Mathematical Background ◽  
Number Of Layers ◽  
Pennes Equation ◽  
Transfer Problems

Abstract An analytical method using Green’s Functions for obtaining solutions in bio-heat transfer problems, modeled by Pennes’ Equation, is presented. Mathematical background on how treating Pennes’ equation and its μ2T term is shown, and two contributions to the classical numbering system in heat conduction are proposed: inclusion of terms to specify the presence of the fin term, μ2T, and identify the biological heat transfer problem. The presentation of the solution is made for a general multi-layer domain, deriving and showing general approaches and Green’s Functions for such n number of layers. Numerical examples are presented to simplify human skin as a two-layer domain: dermis and epidermis, accounting metabolism as a heat source, and blood perfusion only at the dermis. Time-independent summations in the series-solution are written in closed forms, leading to better convergence along the boundaries. Details on obtaining the two-layer solution and its eigenvalues are presented for boundary conditions of prescribed temperature inside the body and convection at the surface, such as its intrinsic verification.

Scalable Heat Transfer Characterization on Film Cooled Geometries Based on Discrete Green’s Functions

2021 ◽  
Vol 143 (2) ◽  
Author(s):  
Jorge Saavedra ◽  
Venkat Athmanathan ◽  
Guillermo Paniagua ◽  
Terrence Meyer ◽  
Doug Straub ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Flat Plate ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Green's Functions ◽  
Green’S Functions ◽  
Numerical Procedure ◽  
Local Heat Transfer ◽  
Sensitivity Matrix

Abstract The aerothermal characterization of film-cooled geometries is traditionally performed at reduced temperature conditions, which then requires a debatable procedure to scale the convective heat transfer performance to engine conditions. This paper describes an alternative engine-scalable approach, based on Discrete Green’s Functions (DGF) to evaluate the convective heat flux along film-cooled geometries. The DGF method relies on the determination of a sensitivity matrix that accounts for the convective heat transfer propagation across the different elements in the domain. To characterize a given test article, the surface is discretized in multiple elements that are independently exposed to perturbations in heat flux to retrieve the sensitivity of adjacent elements, exploiting the linearized superposition. The local heat transfer augmentation on each segment of the domain is normalized by the exposed thermal conditions and the given heat input. The resulting DGF matrix becomes independent from the thermal boundary conditions, and the heat flux measurements can be scaled to any conditions given that Reynolds number, Mach number, and temperature ratios are maintained. The procedure is applied to two different geometries, a cantilever flat plate and a film-cooled flat plate with a 30 degree 0.125 in. cylindrical injection orifice with length-to-diameter ratio of 6. First, a numerical procedure is applied based on conjugate 3D unsteady Reynolds-averaged Navier–Stokes (URANS) simulations to assess the applicability and accuracy of this approach. Finally, experiments performed on a flat plate geometry are described to validate the method and its applicability. Wall-mounted thermocouples are used to monitor the surface temperature evolution, while a 10 kHz burst-mode laser is used to generate heat flux addition on each of the discretized elements of the DGF sensitivity matrix.

THREE‐DIMENSIONAL INDUCED POLARIZATION AND ELECTROMAGNETIC MODELING

Geophysics ◽  
1975 ◽  
Vol 40 (2) ◽  
pp. 309-324 ◽  
Author(s):  
Gerald W. Hohmann
Keyword(s):  
Integral Equation ◽  
Green's Functions ◽  
Green’S Functions ◽  
Three Dimensional ◽  
Induced Polarization ◽  
The Body ◽  
Scale Model ◽  
Two Dimensional ◽  
Electromagnetic Modeling ◽  
The Earth

The induced polarization (IP) and electromagnetic (EM) responses of a three‐dimensional body in the earth can be calculated using an integral equation solution. The problem is formulated by replacing the body by a volume of polarization or scattering current. The integral equation is reduced to a matrix equation, which is solved numerically for the electric field in the body. Then the electric and magnetic fields outside the inhomogeneity can be found by integrating the appropriate dyadic Green’s functions over the scattering current. Because half‐space Green’s functions are used, it is only necessary to solve for scattering currents in the body—not throughout the earth. Numerical results for a number of practical cases show, for example, that for moderate conductivity contrasts the dipole‐dipole IP response of a body five units in strike length approximates that of a two‐dimensional body. Moving an IP line off the center of a body produces an effect similar to that of increasing the depth. IP response varies significantly with conductivity contrast; the peak response occurs at higher contrasts for two‐dimensional bodies than for bodies of limited length. Very conductive bodies can produce negative IP response due to EM induction. An electrically polarizable body produces a small magnetic field, so that it is possible to measure IP with a sensitive magnetometer. Calculations show that horizontal loop EM response is enhanced when the background resistivity in the earth is reduced, thus confirming scale model results.

Sign in / Sign up

Export Citation Format

Share Document