PMPS: A Prototype CAPP System for Parallel Machining

1996 ◽  
Vol 118 (3) ◽  
pp. 406-414 ◽  
Author(s):  
J. B. Levin ◽  
D. Dutta
Keyword(s):  
Process Planning ◽  
Machine Tools ◽  
Machining Accuracy ◽  
Next Generation ◽  
Computer Aided Process Planning ◽  
Cycle Times ◽  
The Past ◽  
Computer Aided ◽  
Machining Operations ◽  
New Generation

Parallel N.C. machines, also referred to as mill-turns, are a new generation of machine tools aimed at increasing machining accuracy and reducing part cycle times. In addition to their capacity to do both milling and turning, these next generation machines tools can perform multiple machining operations simultaneously, involving one or more parts at a time, and can completely finish a part (front and back) in a single setup. Parallel machining raises issues with respect to computer aided process planning which have not been dealt with in the past. In this paper, a prototype CAPP system called PMPS, for parallel machining, is described. First, we briefly highlight the new issues to be dealt with in process planning for parallel machining. Next, the architecture and details of PMPS, a generative CAPP system, is described. Finally, the implementation and results are discussed.

On the Effects of Parallelism on Computer-Aided Process Planning

1992 ◽  
Author(s):  
Jordan B. Levin ◽  
Debasish Dutta
Keyword(s):  
Process Planning ◽  
Machine Tools ◽  
Computer Integrated Manufacturing ◽  
Critical Function ◽  
Ongoing Research ◽  
Computer Aided Process Planning ◽  
New Class ◽  
Computer Aided ◽  
Machining Operations ◽  
New Machine

Abstract Computer-aided process planning is a critical function in the overall scheme of computer-integrated manufacturing (CIM). Progress in CIM is key to increased productivity. Furthermore, as new CIM systems evolve, the latest advancements from the constituent areas must be incorporated. Toward that end, our ongoing research deals with the development of methodologies to enable the inclusion of a new class of machine tools characterized by their ability to carry out machining operations in parallel. In this paper, we identify and elaborate on the effects of parallelism on computer-aided process planning, which are brought about by these new machine tools.

Computer Aided Process Planning for Machining the Gears

2011 ◽  
Vol 264-265 ◽  
pp. 1551-1556
Author(s):  
Deepak Byotra ◽  
Rajesh Kumar Bhushan
Keyword(s):  
Process Planning ◽  
Hybrid Approach ◽  
Machining Processes ◽  
Machining Time ◽  
Computer Aided Process Planning ◽  
Computer Aided ◽  
Set Up ◽  
Cutting Processes ◽  
Machining Operations ◽  
Grinding Operations

Bulk of power transmitting metal gears of machinery is produced by machining processes from cast, forged or hot rolled blanks. It includes a number of versatile machining operations that use a milling cutter, a multi tooth tool to produce a variety of configurations. The aim of the computer aided process planning (CAPP) is to develop a programme for milling cutting processes. This paper reveals the hybrid approach to computer aided process planning for milling and grinding operations on gear blank, so that the plan can be generated taking into account the availability of machines and the material. The developed computer aided process plan has reduced the set up time and machining time by 40.90 and 30.15 % respectively.

Analysis and structuring of process planning logic for CNC machining: An education and training perspective

2017 ◽  
Vol 46 (2) ◽  
pp. 97-117 ◽  
Author(s):  
Stylianos Moschonissiotis ◽  
George-Christopher Vosniakos
Keyword(s):  
Process Planning ◽  
Cnc Machining ◽  
Numerical Control ◽  
Computer Aided Process Planning ◽  
Plan Generation ◽  
Computer Aided ◽  
Baseline Knowledge ◽  
Structured Knowledge ◽  
Inexperienced User ◽  
Machining Operations

Programming of computer numerical control (CNC) machining centres using computer aided manufacturing (CAM) software is efficient provided that machining operations and their sequence has been correctly determined by the user. Such decisions, however, are a largely matter of experience. If the user is inexperienced, then Computer Aided Process Planning systems may be employed, but these are usually legacy systems. Thus, normally some prior knowledge has to be induced to the inexperienced user in the form of structured knowledge or rules. After studying a representative number of parts, creating and validating process plans and feeding them to a CAM system some baseline knowledge has been created and structured into rules. Training the user towards applying these rules, or even creation of custom rules is based on part analysis according to a basic reasoning. This is best implemented by advance-organisers of the schematic type regarding part form, process identification, work-holding and setup sequencing, whilst creation of steps or instructions for guiding the process plan generation flow is effected according to the Structure of the Observed Learning Outcome paradigm. The method has been applied to a sizeable audience and preliminary statistical and qualitative evidence on its effectiveness is presented.

Machining Feature-Based CAD/CAPP for STEP-NC

2014 ◽  
Vol 598 ◽  
pp. 591-594 ◽  
Author(s):  
Li Yan Zhang
Keyword(s):  
Process Planning ◽  
Manufacturing Process ◽  
Data Transfer ◽  
Operation Planning ◽  
Computer Aided Process Planning ◽  
Machining Feature ◽  
Computer Aided ◽  
Cad Cam ◽  
Feature Based ◽  
Cam Systems

ISO 14649, known as STEP-NC, is new model of data transfer between CAD/CAM systems and CNC machines. In this paper, the modeling based on machining feature is proposed. The machining feature comes from the manufacturing process considering the restriction of machining technology and machining resource. Then the framework for computer aided process planning is presented, where the algorithms of operation planning is studied. The practical example has been provided and results indicate that machining feature based model can integrate with CAPP and STEP-NC seamlessly.

Sign in / Sign up

Export Citation Format

Share Document