An Experimental Study of Upper Hot Layer Stratification in Full-Scale Multiroom Fire Scenarios

1982 ◽  
Vol 104 (4) ◽  
pp. 741-749 ◽  
Author(s):  
L. Y. Cooper ◽  
M. Harkleroad ◽  
J. Quintiere ◽  
W. Rinkinen
Keyword(s):  
Experimental Study ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Simulation Models ◽  
Full Scale ◽  
Major Objective ◽  
Vertical Arrays ◽  
Fire Scenarios ◽  
Smoke Filling

This paper describes an experimental study of the dynamics of smoke filling in realistic, full-scale, multiroom fire scenarios. A major objective of the study was to generate an experimental data base for use in the verification of mathematical fire simulation models. The test space involved 2 or 3 rooms, connected by open doorways. During the course of the study the areas were partitioned to yield four different configurations. One of the rooms was a burn room containing a methane burner which produced either a constant energy release rate of 25, 100, or 225 kW or a time-varying energy release rate which increased linearly with time from zero at ignition to 300 kW in 10 min. An artificial smoke source near the ceiling of the burn room provided a means for visualizing the descent of the hot layer and the dynamics of the smoke filling process in the various spaces. The development of the hot stratified layers in the various spaces was monitored by vertical arrays of thermocouples and photometers. A layer interface was identified and its position as a function of time was determined. An analysis and discussion of these results are presented.

Fracture Behavior of Cracked Ring Specimen at Different Crack Positions

2020 ◽  
Vol 142 (5) ◽  
Author(s):  
Abdulmohsen M. Alqahtani ◽  
Thamer K. Albulayhid ◽  
Mutlaq N. Alotaibi ◽  
Ibrahim M. Alarifi ◽  
Tarek M. A. A. EL-Bagory
Keyword(s):  
Experimental Study ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Fracture Behavior ◽  
Radial Crack ◽  
Tensile Load ◽  
Plastic Pipe ◽  
Piping Systems ◽  
Crack Position

Abstract The previous research review of piping systems revealed that the plastic pipe companies suffered from many problems in natural gas pipeline systems. One of the most significant problems that appeared in the piping systems are external cracks due to manufacturing processes, welding technique, and installation processes. The principal goal of the present experimental study is to predict the crack growth behavior and energy release rate of cracked ring specimens made from high-density polyethylene (HDPE) under different crack position angles and various crosshead speeds. The effect of loading rate on the external radial crack at different crack position angles plays an important role in the prediction of fracture behavior of plastic pipe materials. For this reason, it is necessary to conduct a study for the fracture analysis of pipe ring specimens under tension loading with double external cracks at constant radial crack length to width ratio equal a/W = 0.5. A precracking machine is designed especially in the present experimental study to simulate the actual radial cracks at outer surface of pipe ring specimens. The effects of crosshead speed and crack position angle revealed a significant effect on the energy release rate and maximum applied load under tensile load.

Fracture Behavior of Cracked Ring Specimen at Different Crack Positions

2019 ◽  
Author(s):  
Abdulmohsen M. Alqahtani ◽  
Thamer K. Albulayhid ◽  
Mutlaq N. Alotaibi ◽  
Ibrahim M. Alarifi ◽  
Tarek M. A. A. El-Bagory
Keyword(s):  
Experimental Study ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Fracture Behavior ◽  
Radial Crack ◽  
Tensile Load ◽  
Ring Specimen ◽  
Piping Systems ◽  
Crack Position

Abstract The previous research review of piping systems revealed that the plastic pipes companies suffered from many problems in natural gas pipeline systems. One of the most significant problems appeared in the piping systems are external cracks due to manufacturing processes, welding technique and installation processes. The principal goal of the present experimental study is to predict the crack growth behavior and energy release rate of cracked ring specimen made from high-density polyethylene (HDPE) under different crack position angles and various crosshead speeds. The effect of loading rate on the external radial crack at different crack position angles plays an important role in the prediction of fracture behavior of plastic pipe materials. For this reasons, it is necessary to conduct a study for the fracture analysis of pipe ring specimen under tension loading with double external cracks at constant radial crack length to width ratio equal a/W = 0.5. Pre-cracking machine is designed especially in the present experimental study to simulate the actual radial cracks at outer surface of pipe ring specimens. The effects of crosshead speed and crack position angle are revealed a significant effect on the energy release rate and maximum applied load under tensile load.

Calculating Energy Release Rate as a Function of Crack Length Using a Multiple-Step Crack Closure Technique in Tire Finite Element Models

2018 ◽  
Vol 46 (3) ◽  
pp. 130-152
Author(s):  
Dennis S. Kelliher
Keyword(s):  
Finite Element ◽  
Energy Release Rate ◽  
Crack Length ◽  
Energy Release ◽  
Crack Closure ◽  
Release Rate ◽  
Fatigue Behavior ◽  
Three Dimensions ◽  
Quantitative Prediction ◽  
Closure Technique

ABSTRACT When performing predictive durability analyses on tires using finite element methods, it is generally recognized that energy release rate (ERR) is the best measure by which to characterize the fatigue behavior of rubber. By addressing actual cracks in a simulation geometry, ERR provides a more appropriate durability criterion than the strain energy density (SED) of geometries without cracks. If determined as a function of crack length and loading history, and augmented with material crack growth properties, ERR allows for a quantitative prediction of fatigue life. Complications arise, however, from extra steps required to implement the calculation of ERR within the analysis process. This article presents an overview and some details of a method to perform such analyses. The method involves a preprocessing step that automates the creation of a ribbon crack within an axisymmetric-geometry finite element model at a predetermined location. After inflating and expanding to three dimensions to fully load the tire against a surface, full ribbon sections of the crack are then incrementally closed through multiple solution steps, finally achieving complete closure. A postprocessing step is developed to determine ERR as a function of crack length from this enforced crack closure technique. This includes an innovative approach to calculating ERR as the crack length approaches zero.

scholarly journals Effect of the Characteristic Size and Content of Graphene on the Crack Propagation Path of Alumina/Graphene Composite Ceramics

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 611
Author(s):  
Benshuai Chen ◽  
Guangchun Xiao ◽  
Mingdong Yi ◽  
Jingjie Zhang ◽  
Tingting Zhou ◽  
...  
Keyword(s):  
Crack Propagation ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Volume Content ◽  
Phase Interface ◽  
Average Energy ◽  
Characteristic Size ◽  
Composite Ceramics ◽  
Graphene Composite

In this paper, the Voronoimosaic model and the cohesive element method were used to simulate crack propagation in the microstructure of alumina/graphene composite ceramic tool materials. The effects of graphene characteristic size and volume content on the crack propagation behavior of microstructure model of alumina/graphene composite ceramics under different interfacial bonding strength were studied. When the phase interface is weak, the average energy release rate is the highest as the short diameter of graphene is 10–50 nm and the long diameter is 1600–2000 nm. When the phase interface is strong, the average energy release rate is the highest as the short diameter of graphene is 50–100 nm and the long diameter is 800–1200 nm. When the volume content of graphene is 0.50 vol.%, the average energy release rate reaches the maximum. When the velocity load is 0.005 m s−1, the simulation result is convergent. It is proven that the simulation results are in good agreement with the experimental phenomena.

Sign in / Sign up

Export Citation Format

Share Document