Guided Surface Waves on an Elastic Half Space

1971 ◽  
Vol 38 (4) ◽  
pp. 899-905 ◽  
Author(s):  
L. B. Freund
Keyword(s):  
Wave Propagation ◽  
Surface Wave ◽  
Surface Waves ◽  
Half Space ◽  
Body Wave ◽  
Three Dimensional ◽  
Elastic Half Space ◽  
Normal Displacement ◽  
Rigid Barrier ◽  
Wave Disturbances

Three-dimensional wave propagation in an elastic half space is considered. The half space is traction free on half its boundary, while the remaining part of the boundary is free of shear traction and is constrained against normal displacement by a smooth, rigid barrier. A time-harmonic surface wave, traveling on the traction free part of the surface, is obliquely incident on the edge of the barrier. The amplitude and the phase of the resulting reflected surface wave are determined by means of Laplace transform methods and the Wiener-Hopf technique. Wave propagation in an elastic half space in contact with two rigid, smooth barriers is then considered. The barriers are arranged so that a strip on the surface of uniform width is traction free, which forms a wave guide for surface waves. Results of the surface wave reflection problem are then used to geometrically construct dispersion relations for the propagation of unattenuated guided surface waves in the guiding structure. The rate of decay of body wave disturbances, localized near the edges of the guide, is discussed.

Rayleigh-type surface wave on a rotating orthotropic elastic half-space with impedance boundary conditions

2020 ◽  
Vol 26 (21-22) ◽  
pp. 1980-1987
Author(s):  
Baljeet Singh ◽  
Baljinder Kaur
Keyword(s):  
Surface Wave ◽  
Boundary Conditions ◽  
Rayleigh Wave ◽  
Surface Waves ◽  
Half Space ◽  
Rotation Rate ◽  
Secular Equation ◽  
Elastic Half Space ◽  
Impedance Boundary ◽  
Impedance Boundary Conditions

The propagation of Rayleigh type surface waves in a rotating elastic half-space of orthotropic type is studied under impedance boundary conditions. The secular equation is obtained explicitly using traditional methodology. A program in MATLAB software is developed to obtain the numerical values of the nondimensional speed of Rayleigh wave. The speed of Rayleigh wave is illustrated graphically against rotation rate, nondimensional material constants, and impedance boundary parameters.

THREE‐DIMENSIONAL SEISMIC MODEL STUDIES

Geophysics ◽  
1955 ◽  
Vol 20 (1) ◽  
pp. 19-32 ◽  
Author(s):  
F. K. Levin ◽  
H. C. Hibbard
Keyword(s):  
Wave Propagation ◽  
Surface Wave ◽  
Elastic Wave ◽  
Surface Waves ◽  
Shear Waves ◽  
Three Dimensional ◽  
Seismic Model ◽  
Model Studies ◽  
Ground Roll ◽  
Detector Configurations

Elastic wave propagation in a two‐layer section has been studied with a solid two‐bed model and records resembling seismograms obtained for the four possible source‐detector configurations. Numerous events are identified. Among these, the shear waves are found to be surprisingly prominent. The amplitude of the ground roll falls off approximately as [Formula: see text] This is the amplitude‐range dependence expected for a surface wave. The ability of two in‐line detectors to reduce surface waves has been demonstrated.

scholarly journals ON SURFACE WAVES IN A FINITELY DEFORMED MAGNETOELASTIC HALF-SPACE

2011 ◽  
Vol 03 (04) ◽  
pp. 633-665 ◽  
Author(s):  
P. SAXENA ◽  
R. W. OGDEN
Keyword(s):  
Magnetic Field ◽  
Wave Propagation ◽  
Surface Wave ◽  
Surface Waves ◽  
Half Space ◽  
Wave Speed ◽  
Sagittal Plane ◽  
Isotropic Energy ◽  
Surface Wave Propagation ◽  
Homogeneous Strain

Rayleigh-type surface waves propagating in an incompressible isotropic half-space of nonconducting magnetoelastic material are studied for a half-space subjected to a finite pure homogeneous strain and a uniform magnetic field. First, the equations and boundary conditions governing linearized incremental motions superimposed on an initial motion and underlying electromagnetic field are derived and then specialized to the quasimagnetostatic approximation. The magnetoelastic material properties are characterized in terms of a "total" isotropic energy density function that depends on both the deformation and a Lagrangian measure of the magnetic induction. The problem of surface wave propagation is then analyzed for different directions of the initial magnetic field and for a simple constitutive model of a magnetoelastic material in order to evaluate the combined effect of the finite deformation and magnetic field on the surface wave speed. It is found that a magnetic field in the considered (sagittal) plane in general destabilizes the material compared with the situation in the absence of a magnetic field, and a magnetic field applied in the direction of wave propagation is more destabilizing than that applied perpendicular to it.

Effect of boundaries on wave propagation in media with microstructure: II. Surface waves in a half-space

1974 ◽  
Vol 64 (2) ◽  
pp. 387-392
Author(s):  
M. Farshad ◽  
G. Ahmadi
Keyword(s):  
Wave Propagation ◽  
Surface Wave ◽  
Surface Waves ◽  
Half Space ◽  
Couple Stress ◽  
Couple Stress Theory ◽  
Classical Elasticity ◽  
Stress Theory ◽  
Material Parameters ◽  
Surface Wave Propagation

abstract The surface-wave propagation in a half-space according to couple-stress theory is studied herein. Dispersion curves as well as displacement variations with the depth coordinate are obtained for a range of material parameters. Comparison is made with the classical elasticity predictions upon which certain conclusions are reached.

Rayleigh waves guided by topography

2006 ◽  
Vol 463 (2078) ◽  
pp. 531-550 ◽  
Author(s):  
Samuel D.M Adams ◽  
Richard V Craster ◽  
Duncan P Williams
Keyword(s):  
Wave Propagation ◽  
Surface Wave ◽  
Half Space ◽  
Cross Section ◽  
Rayleigh Waves ◽  
Elastic Half Space ◽  
Infinite Length ◽  
Rigorous Proof ◽  
Trapped Wave ◽  
Surface Variation

We consider wave propagation along the surface of an elastic half-space, whose surface is flat except for a straight, infinite length, ridge or trench that does not vary in its cross-section. We seek to resolve the issue of whether such a perturbed surface can support a trapped wave, whose energy is localized to within some vicinity of the defect, and explain physically how this trapping occurs. First, the trapping is addressed by developing an asymptotic scheme, which exploits a small parameter associated with the surface variation, to perturb about the base state of a flat half-space (which supports a surface wave, as demonstrated by Lord Rayleigh in 1885). We then provide convincing numerical evidence to support the results obtained from the asymptotic scheme; however, no rigorous proof of existence is presented.

scholarly journals Surface waves guided by topography in an anisotropic elastic half-space

2013 ◽  
Vol 469 (2149) ◽  
pp. 20120371 ◽  
Author(s):  
Y. B. Fu ◽  
G. A. Rogerson ◽  
W. F. Wang
Keyword(s):  
Surface Wave ◽  
Surface Waves ◽  
Half Space ◽  
Wave Speed ◽  
Elastic Half Space ◽  
Simple Eigenvalue ◽  
Plane Shear ◽  
Number Of Factors ◽  
Present Context ◽  
Anisotropic Elastic

We consider the propagation of free surface waves on an elastic half-space that has a localized geometric inhomogeneity perpendicular to the direction of wave propagation (such waves are known as topography-guided surface waves). Our aim is to investigate how such a weak inhomogeneity modifies the surface-wave speed slightly. We first recover previously known results for isotropic materials and then present additional results for a generally anisotropic elastic half-space assuming only one plane of material symmetry. It is shown that a topography-guided surface wave in the present context may or may not propagate depending on a number of factors. In particular, they cannot propagate if the original two-dimensional surface wave on a flat half-space is supersonic with respect to the speed of anti-plane shear waves. For the case when a topography-guided surface wave may exist, the existence and computation of wave speed correction is reduced to the solution of a simple eigenvalue problem whose properties are previously well understood. As a by-product of our analysis, we deduce that there exists at least one topography-guided surface wave on an isotropic elastic half-space, and that it is unique when the geometric inhomogeneity has sufficiently small amplitude.

Sign in / Sign up

Export Citation Format

Share Document