scholarly journals Erratum: “Temperature Stress Distribution in a Sphere Due to a Uniform Heat Source for Strain-Hardening Material” (Journal of Applied Mechanics, 1972, 39, pp. 274–276)

1972 ◽  
Vol 39 (3) ◽  
pp. 660-660
Author(s):  
D. Gosh Dastidar
Keyword(s):  
Stress Distribution ◽  
Heat Source ◽  
Strain Hardening ◽  
Temperature Stress ◽  
Applied Mechanics ◽  
Hardening Material ◽  
Uniform Heat

Plastic Stress Concentration at a Circular Hole in an Infinite Sheet Subjected to Equal Biaxial Tension

1960 ◽  
Vol 27 (1) ◽  
pp. 59-64 ◽  
Author(s):  
Bernard Budiansky ◽  
O. L. Mangasarian
Keyword(s):  
Stress Concentration ◽  
Stress Distribution ◽  
Strain Hardening ◽  
Circular Hole ◽  
Applied Stress ◽  
Stress Concentration Factor ◽  
Concentration Factor ◽  
Deformation Theory ◽  
Biaxial Tension ◽  
Hardening Material

With the use of J2 deformation theory, the stress-concentration factor at a circular hole in an infinite sheet of strain-hardening material subjected to equal biaxial tension at infinity is found for a variety of representative materials. The analysis exploits a transformation which permits the calculation of the stress-concentration factor without determining the stress distribution in the sheet. Subsequent calculations reveal that, for a monotonically increasing applied stress, the stress history at all points in the sheet is nearly radial.

Stress Distribution and Plastic Deformation in Rotating Cylinders of Strain-Hardening Material

1959 ◽  
Vol 26 (1) ◽  
pp. 25-30
Author(s):  
E. A. Davis ◽  
F. M. Connelly
Keyword(s):  
Plastic Deformation ◽  
Stress Distribution ◽  
Strain Hardening ◽  
Shearing Stress ◽  
Combined Stress ◽  
Rotating Cylinders ◽  
Hardening Material ◽  
Hydrostatic Tension ◽  
Shearing Strain ◽  
Triaxiality Factor

Abstract Equations for the stress distribution in plastic rotating cylinders are developed for both hollow and solid cylinders. It is assumed that the stress-strain relations may depend upon either the maximum shearing stress or the octahedral shearing stress and the corresponding shearing strain. A triaxiality factor proportional to the ratio of the hydrostatic tension to the octahedral shearing stress is introduced. This factor may be useful in evaluating the ductility of metals under combined stress.

MANUFACTURE INVESTIGATION OF CARTRIDGE WITH BOTTOM-MOST PART FLANGE BY DIRECT EXTRUSION WITH COUNTERPUNCH. REPORT 18. EXPERIMENTAL CHECK OF THEORETICAL RESULTS FOR DIFFERENT HOLLOW RADIUSES AND BOTTOM-MOST PART THICKNESSES

2020 ◽  
Vol 0 (9) ◽  
pp. 16-23
Author(s):  
A. L. Vorontsov ◽  
◽  
I. A. Nikiforov ◽  
Keyword(s):  
Strain Hardening ◽  
Theoretical Calculations ◽  
High Accuracy ◽  
Geometric Parameters ◽  
Strength Characteristics ◽  
Experimental Check ◽  
Hardening Material ◽  
Direct Extrusion ◽  
Theoretical Results

The results of an experimental check of the obtained theoretical formulae allowing us to determine the most important parameters of extrusion cartridges with a counterpunch for different hollow radiuses and bottom-most part thicknesses are presented. Characteristics of used tools, geometric parameters of extrusion experiments, strength characteristics of deformed materials and lubricants are described in detail. Both strain-hardening material and strain-unhardening material were studied. Methodology of the theoretical calculations is demonstrated in detail. High accuracy of the obtained design formulae was confirmed.

MHD Stagnation Point Flow over Exponentially Stretching Sheet with Exponentially Moving Free-Stream, Viscous Dissipation, Thermal Radiation and Non-Uniform Heat Source/Sink

2017 ◽  
Vol 11 ◽  
pp. 182-190
Author(s):  
Gauri Shenkar Seth ◽  
Rohit Sharma ◽  
B. Kumbhakar ◽  
R. Tripathi
Keyword(s):  
Heat Source ◽  
Stagnation Point ◽  
Viscous Dissipation ◽  
Free Stream ◽  
Transverse Magnetic ◽  
Stagnation Point Flow ◽  
Uniform Heat ◽  
Highly Nonlinear ◽  
Exponentially Stretching ◽  
Source Sink

An investigation is carried out for the steady, two dimensional stagnation point flow of a viscous, incompressible, electrically conducting, optically thick heat radiating fluid taking viscous dissipation into account over an exponentially stretching non-isothermal sheet with exponentially moving free-stream in the presence of uniform transverse magnetic field and non-uniform heat source/sink. The governing boundary layer equations are transformed into highly nonlinear ordinary differential equations using suitable similarity transform. Resulting boundary value problem is solved numerically with the help of 4th-order Runge-Kutta Gill method along with shooting technique. Effects of various pertinent flow parameters on the velocity, temperature field, skin friction and Nusselt number are described through figures and tables. Also, the present numerical results are compared with the earlier published results for some reduced case and a good agreement has been found among those results.

Effect of non-uniform heat source/sink on MHD boundary layer flow and melting heat transfer of Williamson nanofluid in porous medium

2019 ◽  
Vol 15 (2) ◽  
pp. 452-472 ◽  
Author(s):  
Jayarami Reddy Konda ◽  
Madhusudhana Reddy N.P. ◽  
Ramakrishna Konijeti ◽  
Abhishek Dasore
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Heat Source ◽  
Radiation Effects ◽  
Navier Stokes ◽  
Working Fluid ◽  
Content Type ◽  
Linear Ordinary Differential Equations ◽  
Uniform Heat ◽  
Source Sink

PurposeThe purpose of this paper is to examine the influence of magnetic field on Williamson nanofluid embedded in a porous medium in the presence of non-uniform heat source/sink, chemical reaction and thermal radiation effects.Design/methodology/approachThe governing physical problem is presented using the traditional Navier–Stokes theory. Consequential system of equations is transformed into a set of non-linear ordinary differential equations by means of scaling group of transformation, which are solved using the Runge–Kutta–Fehlberg method.FindingsThe working fluid is examined for several sundry parameters graphically and in a tabular form. It is noticed that with an increase in Eckert number, there is an increase in velocity and temperature along with a decrease in shear stress and heat transfer rate.Originality/valueA good agreement of the present results has been observed by comparing with the existing literature results.

Sign in / Sign up

Export Citation Format

Share Document