Detailed Analysis of the Wake Structure of a Straight-Blade H-Darrieus Wind Turbine by Means of Wind Tunnel Experiments and Computational Fluid Dynamics Simulations

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Alessandro Bianchini ◽  
Francesco Balduzzi ◽  
Giovanni Ferrara ◽  
Lorenzo Ferrari ◽  
Giacomo Persico ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Vertical Axis ◽  
Performance Estimation ◽  
Small Scale ◽  
Dynamics Simulations

Darrieus vertical axis wind turbines (VAWTs) have been recently identified as the most promising solution for new types of applications, such as small-scale installations in complex terrains or offshore large floating platforms. To improve their efficiencies further and make them competitive with those of conventional horizontal axis wind turbines, a more in depth understanding of the physical phenomena that govern the aerodynamics past a rotating Darrieus turbine is needed. Within this context, computational fluid dynamics (CFD) can play a fundamental role, since it represents the only model able to provide a detailed and comprehensive representation of the flow. Due to the complexity of similar simulations, however, the possibility of having reliable and detailed experimental data to be used as validation test cases is pivotal to tune the numerical tools. In this study, a two-dimensional (2D) unsteady Reynolds-averaged Navier–Stokes (U-RANS) computational model was applied to analyze the wake characteristics on the midplane of a small-size H-shaped Darrieus VAWT. The turbine was tested in a large-scale, open-jet wind tunnel, including both performance and wake measurements. Thanks to the availability of such a unique set of experimental data, systematic comparisons between simulations and experiments were carried out for analyzing the structure of the wake and correlating the main macrostructures of the flow to the local aerodynamic features of the airfoils in cycloidal motion. In general, good agreement on the turbine performance estimation was constantly appreciated.

Detailed Analysis of the Wake Structure of a Straight-Blade H-Darrieus Wind Turbine by Means of Wind Tunnel Experiments and CFD Simulations

2017 ◽  
Author(s):  
Alessandro Bianchini ◽  
Francesco Balduzzi ◽  
Giovanni Ferrara ◽  
Lorenzo Ferrari ◽  
Giacomo Persico ◽  
...  
Keyword(s):  
Experimental Data ◽  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Vertical Axis ◽  
Performance Estimation ◽  
Small Scale ◽  
Horizontal Axis Wind Turbines ◽  
Floating Platforms ◽  
Physical Phenomena

Darrieus Vertical Axis Wind Turbines (VAWTs) have been recently identified as the most promising solution for new types of applications, such as small-scale installations in complex terrains or offshore large floating platforms. To improve their efficiencies further and make them competitive with those of conventional horizontal axis wind turbines, a more in depth understanding of the physical phenomena that govern the aerodynamics past a rotating Darrieus turbine is needed. Within this context, Computational Fluid Dynamics (CFD) can play a fundamental role, since it represents the only model able to provide a detailed and comprehensive representation of the flow. Due to the complexity of similar simulations, however, the possibility of having reliable and detailed experimental data to be used as validation test cases is pivotal to tune the numerical tools. In this study, a two-dimensional U-RANS computational model was applied to analyze the wake characteristics on the mid plane of a small-size H-shaped Darrieus VAWT. The turbine was tested in a large-scale, open-jet wind tunnel, including both performance and wake measurements. Thanks to the availability of such a unique set of experimental data, systematic comparisons between simulations and experiments were carried out analyzing the structure of the wake, and correlating the main macro-structures of the flow to the local aerodynamic features of the airfoils in cycloidal motion. In general, good agreement on the turbine performance estimation was constantly appreciated.

Development of a Computational Fluid Dynamics Methodology to Reproduce the Effects of Macroturbulence on Wind Turbines and Its Application to the Particular Case of a VAWT

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Francesco Balduzzi ◽  
Marco Zini ◽  
Giovanni Ferrara ◽  
Alessandro Bianchini
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Maximum Level ◽  
Vertical Axis ◽  
Energy Yield ◽  
Vertical Axis Wind Turbine ◽  
Wind Tunnel Data

Abstract Based on existing reports and databases, most of the installations in highly turbulent sites in fact fail to reach the expected energy yield, resulting in still or underperforming turbines that also give bad press for the technology. A better understanding of the real performance of wind turbines under highly turbulent conditions is then pivotal to ensure the economic viability of new installations. To this end, the possible use of computational fluid dynamics (CFD) techniques could provide notable benefits, reducing the time-to-market and the cost with respect to experiments. On the other hand, it is intrinsically not easy to reproduce properly intense and large-scale turbulence with the techniques of common use for research and industry (e.g., CFD unsteady Reynolds-averaged Navier–Stokes (URANS)), while the only methods that are granted to do so (e.g., direct numerical simulation (DNS) or large eddy simulation (LES)) are often not computationally affordable. Moving from this background, this study presents the development of a numerical strategy to exploit at their maximum level the capabilities of an unsteady RANS approach in order to reproduce fields of macroturbulence of use for wind energy applications. The study is made of two main parts. In the first part, the numerical methodology is discussed and assessed based on real wind tunnel data. The benefits and drawbacks are presented also in comparison to other existing methods. In the second part, it has been used to simulate the behavior under turbulence of a H Darrieus vertical-axis wind turbine, for which unique wind tunnel data were available. The simulations, even if preliminary, showed good matching with experiments (e.g., confirming the increase of power), showing then the potential of the method.

Optimization of blade pitch in H-rotor vertical axis wind turbines through computational fluid dynamics simulations

2018 ◽  
Vol 212 ◽  
pp. 1107-1125 ◽  
Author(s):  
Chao Li ◽  
Yiqing Xiao ◽  
You-lin Xu ◽  
Yi-xin Peng ◽  
Gang Hu ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbines ◽  
Computational Fluid Dynamics Simulations ◽  
Dynamics Simulations

Investigation of Self-Starting Capability of Vertical Axis Wind Turbines Using a Computational Fluid Dynamics Approach

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Alexandrina Untaroiu ◽  
Houston G. Wood ◽  
Paul E. Allaire ◽  
Robert J. Ribando
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Mesh Deformation ◽  
Operating Speed ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Turbine Performance

Vertical axis wind turbines have always been a controversial technology; claims regarding their benefits and drawbacks have been debated since the initial patent in 1931. Despite this contention, very little systematic vertical axis wind turbine research has been accomplished. Experimental assessments remain prohibitively expensive, while analytical analyses are limited by the complexity of the system. Numerical methods can address both concerns, but inadequate computing power hampered this field. Instead, approximating models were developed which provided some basis for study; but all these exhibited high error margins when compared with actual turbine performance data and were only useful in some operating regimes. Modern computers are capable of more accurate computational fluid dynamics analysis, but most research has focused on horizontal axis configurations or modeling of single blades rather than full geometries. In order to address this research gap, a systematic review of vertical axis wind-power turbine (VAWT) was undertaken, starting with establishment of a methodology for vertical axis wind turbine simulation that is presented in this paper. Replicating the experimental prototype, both 2D and 3D models of a three-bladed vertical axis wind turbine were generated. Full transient computational fluid dynamics (CFD) simulations using mesh deformation capability available in ansys-CFX were run from turbine start-up to operating speed and compared with the experimental data in order to validate the technique. A circular inner domain, containing the blades and the rotor, was allowed to undergo mesh deformation with a rotational velocity that varied with torque generated by the incoming wind. Results have demonstrated that a transient CFD simulation using a two-dimensional computational model can accurately predict vertical axis wind turbine operating speed within 12% error, with the caveat that intermediate turbine performance is not accurately captured.

Development of a CFD Methodology to Reproduce the Effects of Macro Turbulence on Wind Turbines and its Application to the Particular Case of a VAWT

2019 ◽  
Author(s):  
Francesco Balduzzi ◽  
Marco Zini ◽  
Giovanni Ferrara ◽  
Alessandro Bianchini
Keyword(s):  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Maximum Level ◽  
Vertical Axis ◽  
Navier Stokes ◽  
Energy Yield ◽  
Vertical Axis Wind Turbine ◽  
Energy Applications ◽  
Wind Tunnel Data

Abstract Based on existing reports and databases, most of the installations in highly turbulent sites in fact fail to reach the expected energy yield, resulting in still or underperforming turbines that also give bad press for the technology. A better understanding of the real performance of wind turbines under highly turbulent conditions is then pivotal to ensure the economic viability of new installations. To this end, the possible use of Computational Fluid Dynamics (CFD) techniques could provide notable benefits, reducing the time-to-market and the cost with respect to experiments. On the other hand, it is intrinsically not easy to reproduce properly intense and large-scale turbulence with the techniques of common use for research and industry (e.g. CFD unsteady RANS), while the only methods that are granted to do so (e.g. DNS or LES) are often not computationally affordable. Moving from this background, this study presents the development a numerical strategy to exploit at their maximum level the capabilities of an unsteady Reynolds-Averaged Navier-Stokes (RANS) approach in order to reproduce fields of macro turbulence of use for wind energy applications. The study is made of two main parts. In the first part, the numerical methodology is discussed and assessed based on real wind tunnel data. The benefits and drawbacks are presented also in comparison to other existing methods. In the second part, it has been used to simulate the behavior under turbulence of a H-Darrieus vertical-axis wind turbine, for which unique wind tunnel data were available. The simulations, even if preliminary, showed good matching with experiments (e.g. confirming the increase of power), showing then the potential of the method.

Computational fluid dynamics study of Savonius rotors using OpenFOAM

2020 ◽  
pp. 0309524X2092495
Author(s):  
Federico González Madina ◽  
Alejandro Gutiérrez ◽  
Pedro Galione
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Dynamics Simulation ◽  
Power Coefficient ◽  
Small Scale ◽  
Two Dimensional ◽  
Discretization Schemes ◽  
Set Up

In this work, two-dimensional models of Savonius rotors are simulated using OpenFOAM® in order to predict the aerodynamic performance of small-scale vertical-axis wind turbines. The results are reported analyzing the aerodynamic performance and forces acting on the rotors. Power coefficient, [Formula: see text], is compared with experimental data for each operation point, and for three different geometries. Simulations with first- and second-order discretization schemes are carried out and compared, both quantitative and qualitative. Since usual grid dimensions result not to be suitable for simulations of Savonius rotors, an analysis of different domains is performed and compared. Finally, a set up for computational fluid dynamics simulation of two-dimensional Savonius rotors is proposed. The fluid–rotor interaction is analyzed and the vortex shedding is correlated with [Formula: see text] values and wake description.

scholarly journals Unsteady aerodynamic analysis for offshore floating wind turbines under different wind conditions

2015 ◽  
Vol 373 (2035) ◽  
pp. 20140080 ◽  
Author(s):  
B. F. Xu ◽  
T. G. Wang ◽  
Y. Yuan ◽  
J. F. Cao
Keyword(s):  
Experimental Data ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Aerodynamic Performance ◽  
Small Scale ◽  
Floating Platform ◽  
Unsteady Aerodynamic ◽  
Blade Root ◽  
Platform Motions

A free-vortex wake (FVW) model is developed in this paper to analyse the unsteady aerodynamic performance of offshore floating wind turbines. A time-marching algorithm of third-order accuracy is applied in the FVW model. Owing to the complex floating platform motions, the blade inflow conditions and the positions of initial points of vortex filaments, which are different from the fixed wind turbine, are modified in the implemented model. A three-dimensional rotational effect model and a dynamic stall model are coupled into the FVW model to improve the aerodynamic performance prediction in the unsteady conditions. The effects of floating platform motions in the simulation model are validated by comparison between calculation and experiment for a small-scale rigid test wind turbine coupled with a floating tension leg platform (TLP). The dynamic inflow effect carried by the FVW method itself is confirmed and the results agree well with the experimental data of a pitching transient on another test turbine. Also, the flapping moment at the blade root in yaw on the same test turbine is calculated and compares well with the experimental data. Then, the aerodynamic performance is simulated in a yawed condition of steady wind and in an unyawed condition of turbulent wind, respectively, for a large-scale wind turbine coupled with the floating TLP motions, demonstrating obvious differences in rotor performance and blade loading from the fixed wind turbine. The non-dimensional magnitudes of loading changes due to the floating platform motions decrease from the blade root to the blade tip.

Aerodynamic Measurements on a Vertical Axis Wind Turbine in a Large Scale Wind Tunnel

2010 ◽  
Author(s):  
L. Battisti ◽  
L. Zanne ◽  
S. Dell’Anna ◽  
V. Dossena ◽  
B. Paradiso ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Flow Field ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Fluid Dynamic ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Aerodynamic Optimization ◽  
Vertical Axis Wind Turbines

This paper presents the first results of a wide experimental investigation on the aerodynamics of a vertical axis wind turbine. Vertical axis wind turbines have recently received particular attention, as interesting alternative for small and micro generation applications. However, the complex fluid dynamic mechanisms occurring in these machines make the aerodynamic optimization of the rotors still an open issue and detailed experimental analyses are now highly recommended to convert improved flow field comprehensions into novel design techniques. The experiments were performed in the large-scale wind tunnel of the Politecnico di Milano (Italy), where real-scale wind turbines for micro generation can be tested in full similarity conditions. Open and closed wind tunnel configurations are considered in such a way to quantify the influence of model blockage for several operational conditions. Integral torque and thrust measurements, as well as detailed aerodynamic measurements were applied to characterize the 3D flow field downstream of the turbine. The local unsteady flow field and the streamwise turbulent component, both resolved in phase with the rotor position, were derived by hot wire measurements. The paper critically analyses the models and the correlations usually applied to correct the wind tunnel blockage effects. Results evidence that the presently available theoretical correction models does not provide accurate estimates of the blockage effect in the case of vertical axis wind turbines. The tip aerodynamic phenomena, in particular, seem to play a key role for the prediction of the turbine performance; large-scale unsteadiness is observed in that region and a simple flow model is used to explain the different flow features with respect to horizontal axis wind turbines.

Sign in / Sign up

Export Citation Format

Share Document