Development of a CFD Methodology to Reproduce the Effects of Macro Turbulence on Wind Turbines and its Application to the Particular Case of a VAWT

2019 ◽  
Author(s):  
Francesco Balduzzi ◽  
Marco Zini ◽  
Giovanni Ferrara ◽  
Alessandro Bianchini
Keyword(s):  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Maximum Level ◽  
Vertical Axis ◽  
Navier Stokes ◽  
Energy Yield ◽  
Vertical Axis Wind Turbine ◽  
Energy Applications ◽  
Wind Tunnel Data

Abstract Based on existing reports and databases, most of the installations in highly turbulent sites in fact fail to reach the expected energy yield, resulting in still or underperforming turbines that also give bad press for the technology. A better understanding of the real performance of wind turbines under highly turbulent conditions is then pivotal to ensure the economic viability of new installations. To this end, the possible use of Computational Fluid Dynamics (CFD) techniques could provide notable benefits, reducing the time-to-market and the cost with respect to experiments. On the other hand, it is intrinsically not easy to reproduce properly intense and large-scale turbulence with the techniques of common use for research and industry (e.g. CFD unsteady RANS), while the only methods that are granted to do so (e.g. DNS or LES) are often not computationally affordable. Moving from this background, this study presents the development a numerical strategy to exploit at their maximum level the capabilities of an unsteady Reynolds-Averaged Navier-Stokes (RANS) approach in order to reproduce fields of macro turbulence of use for wind energy applications. The study is made of two main parts. In the first part, the numerical methodology is discussed and assessed based on real wind tunnel data. The benefits and drawbacks are presented also in comparison to other existing methods. In the second part, it has been used to simulate the behavior under turbulence of a H-Darrieus vertical-axis wind turbine, for which unique wind tunnel data were available. The simulations, even if preliminary, showed good matching with experiments (e.g. confirming the increase of power), showing then the potential of the method.

Development of a Computational Fluid Dynamics Methodology to Reproduce the Effects of Macroturbulence on Wind Turbines and Its Application to the Particular Case of a VAWT

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Francesco Balduzzi ◽  
Marco Zini ◽  
Giovanni Ferrara ◽  
Alessandro Bianchini
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Maximum Level ◽  
Vertical Axis ◽  
Energy Yield ◽  
Vertical Axis Wind Turbine ◽  
Wind Tunnel Data

Abstract Based on existing reports and databases, most of the installations in highly turbulent sites in fact fail to reach the expected energy yield, resulting in still or underperforming turbines that also give bad press for the technology. A better understanding of the real performance of wind turbines under highly turbulent conditions is then pivotal to ensure the economic viability of new installations. To this end, the possible use of computational fluid dynamics (CFD) techniques could provide notable benefits, reducing the time-to-market and the cost with respect to experiments. On the other hand, it is intrinsically not easy to reproduce properly intense and large-scale turbulence with the techniques of common use for research and industry (e.g., CFD unsteady Reynolds-averaged Navier–Stokes (URANS)), while the only methods that are granted to do so (e.g., direct numerical simulation (DNS) or large eddy simulation (LES)) are often not computationally affordable. Moving from this background, this study presents the development of a numerical strategy to exploit at their maximum level the capabilities of an unsteady RANS approach in order to reproduce fields of macroturbulence of use for wind energy applications. The study is made of two main parts. In the first part, the numerical methodology is discussed and assessed based on real wind tunnel data. The benefits and drawbacks are presented also in comparison to other existing methods. In the second part, it has been used to simulate the behavior under turbulence of a H Darrieus vertical-axis wind turbine, for which unique wind tunnel data were available. The simulations, even if preliminary, showed good matching with experiments (e.g., confirming the increase of power), showing then the potential of the method.

Aerodynamic Measurements on a Vertical Axis Wind Turbine in a Large Scale Wind Tunnel

2010 ◽  
Author(s):  
L. Battisti ◽  
L. Zanne ◽  
S. Dell’Anna ◽  
V. Dossena ◽  
B. Paradiso ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Flow Field ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Fluid Dynamic ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Aerodynamic Optimization ◽  
Vertical Axis Wind Turbines

This paper presents the first results of a wide experimental investigation on the aerodynamics of a vertical axis wind turbine. Vertical axis wind turbines have recently received particular attention, as interesting alternative for small and micro generation applications. However, the complex fluid dynamic mechanisms occurring in these machines make the aerodynamic optimization of the rotors still an open issue and detailed experimental analyses are now highly recommended to convert improved flow field comprehensions into novel design techniques. The experiments were performed in the large-scale wind tunnel of the Politecnico di Milano (Italy), where real-scale wind turbines for micro generation can be tested in full similarity conditions. Open and closed wind tunnel configurations are considered in such a way to quantify the influence of model blockage for several operational conditions. Integral torque and thrust measurements, as well as detailed aerodynamic measurements were applied to characterize the 3D flow field downstream of the turbine. The local unsteady flow field and the streamwise turbulent component, both resolved in phase with the rotor position, were derived by hot wire measurements. The paper critically analyses the models and the correlations usually applied to correct the wind tunnel blockage effects. Results evidence that the presently available theoretical correction models does not provide accurate estimates of the blockage effect in the case of vertical axis wind turbines. The tip aerodynamic phenomena, in particular, seem to play a key role for the prediction of the turbine performance; large-scale unsteadiness is observed in that region and a simple flow model is used to explain the different flow features with respect to horizontal axis wind turbines.

Aerodynamic Measurements on a Vertical Axis Wind Turbine in a Large Scale Wind Tunnel

2011 ◽  
Vol 133 (3) ◽  
Author(s):  
L. Battisti ◽  
L. Zanne ◽  
S. Dell’Anna ◽  
V. Dossena ◽  
G. Persico ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Flow Field ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Fluid Dynamic ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Aerodynamic Optimization ◽  
Vertical Axis Wind Turbines

This paper presents the first results of a wide experimental investigation on the aerodynamics of a vertical axis wind turbine. Vertical axis wind turbines have recently received particular attention, as interesting alternative for small and micro generation applications. However, the complex fluid dynamic mechanisms occurring in these machines make the aerodynamic optimization of the rotors still an open issue and detailed experimental analyses are now highly recommended to convert improved flow field comprehensions into novel design techniques. The experiments were performed in the large-scale wind tunnel of the Politecnico di Milano (Italy), where real-scale wind turbines for micro generation can be tested in full similarity conditions. Open and closed wind tunnel configurations are considered in such a way to quantify the influence of model blockage for several operational conditions. Integral torque and thrust measurements, as well as detailed aerodynamic measurements were carried out to characterize the 3D flow field downstream of the turbine. The local unsteady flow field and the streamwise turbulent component, both resolved in phase with the rotor position, were derived by hot wire measurements. The paper critically analyses the models and the correlations usually applied to correct the wind tunnel blockage effects. Results highlight that the presently available theoretical correction models do not provide accurate estimates of the blockage effect in the case of vertical axis wind turbines. The tip aerodynamic phenomena, in particular, seem to play a key role for the prediction of the turbine performance; large-scale unsteadiness is observed in that region and a simple flow model is used here to explain the different flow features with respect to horizontal axis wind turbines.

Detailed Analysis of the Wake Structure of a Straight-Blade H-Darrieus Wind Turbine by Means of Wind Tunnel Experiments and Computational Fluid Dynamics Simulations

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Alessandro Bianchini ◽  
Francesco Balduzzi ◽  
Giovanni Ferrara ◽  
Lorenzo Ferrari ◽  
Giacomo Persico ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Vertical Axis ◽  
Performance Estimation ◽  
Small Scale ◽  
Dynamics Simulations

Darrieus vertical axis wind turbines (VAWTs) have been recently identified as the most promising solution for new types of applications, such as small-scale installations in complex terrains or offshore large floating platforms. To improve their efficiencies further and make them competitive with those of conventional horizontal axis wind turbines, a more in depth understanding of the physical phenomena that govern the aerodynamics past a rotating Darrieus turbine is needed. Within this context, computational fluid dynamics (CFD) can play a fundamental role, since it represents the only model able to provide a detailed and comprehensive representation of the flow. Due to the complexity of similar simulations, however, the possibility of having reliable and detailed experimental data to be used as validation test cases is pivotal to tune the numerical tools. In this study, a two-dimensional (2D) unsteady Reynolds-averaged Navier–Stokes (U-RANS) computational model was applied to analyze the wake characteristics on the midplane of a small-size H-shaped Darrieus VAWT. The turbine was tested in a large-scale, open-jet wind tunnel, including both performance and wake measurements. Thanks to the availability of such a unique set of experimental data, systematic comparisons between simulations and experiments were carried out for analyzing the structure of the wake and correlating the main macrostructures of the flow to the local aerodynamic features of the airfoils in cycloidal motion. In general, good agreement on the turbine performance estimation was constantly appreciated.

Wind Tunnel Experiment on the Aerodynamic Interaction Between Vertical Axis Wind Turbine Pair

2021 ◽  
Author(s):  
Hao Su ◽  
Haoran Meng ◽  
Jia Guo ◽  
Timing Qu ◽  
Liping Lei
Keyword(s):  
Wind Tunnel ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Power Performance ◽  
Array Configuration ◽  
Aerodynamic Interaction ◽  
Positive Effect

Abstract Wind energy has attracted worldwide attention as a pollution-free and widely distributed renewable energy source. Increasing the power density by optimizing the arrangement of wind turbines has been a popular field of research in recent years. In the present work, a systematic study on the influence of array configuration on vertical axis wind turbines is made through wind tunnel experiments. Firstly, the power performance of an isolated vertical axis wind turbine at different tip speed ratios is tested as a benchmark of comparison. Multiple situations of two-turbine configurations are then tested and the results are compared with the isolated wind turbine. The power coefficient of the turbine pair increases by 34% when the turbines are 2.4 rotor diameters apart and rotate in the same direction. In the counter-rotating co-leeward case, it is demonstrated that the turbine pairs will have a positive effect on each other when they are separated by 2.1 rotor diameters to 2.4 rotor diameters. The lateral spacing between the counter-rotating co-windward turbine pair should be greater than 1.5 rotor diameters to avoid turbulence interference between the rotors.

Detailed Analysis of the Wake Structure of a Straight-Blade H-Darrieus Wind Turbine by Means of Wind Tunnel Experiments and CFD Simulations

2017 ◽  
Author(s):  
Alessandro Bianchini ◽  
Francesco Balduzzi ◽  
Giovanni Ferrara ◽  
Lorenzo Ferrari ◽  
Giacomo Persico ◽  
...  
Keyword(s):  
Experimental Data ◽  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Vertical Axis ◽  
Performance Estimation ◽  
Small Scale ◽  
Horizontal Axis Wind Turbines ◽  
Floating Platforms ◽  
Physical Phenomena

Darrieus Vertical Axis Wind Turbines (VAWTs) have been recently identified as the most promising solution for new types of applications, such as small-scale installations in complex terrains or offshore large floating platforms. To improve their efficiencies further and make them competitive with those of conventional horizontal axis wind turbines, a more in depth understanding of the physical phenomena that govern the aerodynamics past a rotating Darrieus turbine is needed. Within this context, Computational Fluid Dynamics (CFD) can play a fundamental role, since it represents the only model able to provide a detailed and comprehensive representation of the flow. Due to the complexity of similar simulations, however, the possibility of having reliable and detailed experimental data to be used as validation test cases is pivotal to tune the numerical tools. In this study, a two-dimensional U-RANS computational model was applied to analyze the wake characteristics on the mid plane of a small-size H-shaped Darrieus VAWT. The turbine was tested in a large-scale, open-jet wind tunnel, including both performance and wake measurements. Thanks to the availability of such a unique set of experimental data, systematic comparisons between simulations and experiments were carried out analyzing the structure of the wake, and correlating the main macro-structures of the flow to the local aerodynamic features of the airfoils in cycloidal motion. In general, good agreement on the turbine performance estimation was constantly appreciated.

Development of a High Efficiency and Long Life 500W Class H-Darrieus Type VAWT (Vertical Axis Wind Turbine) System Using Skin-Spar-Foam Sandwich Composite Structure

2012 ◽  
Author(s):  
Changduk Kong ◽  
Haseung Lee
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Performance Test ◽  
High Efficiency ◽  
Vertical Axis ◽  
Small Scale ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Structural Test

Since the energy crisis and the environmental issue have been focused due to excessive fossil fuel consumption, the wind power has been considered as an important renewable energy source. Recently, several MW class large scale wind turbine systems have been developed in some countries. Even though the large scale wind turbine can effectively produce the electrical power, the small scale wind turbines have been continuously developed due some advantages, for instance, it can be easily built by low cost without any limitation of location, i.e. even in city. In case of small scale wind turbines, the vertical axis wind turbine (VAWT) is used in city having frequent wind direction change, even though it has a bit lower efficient than the horizontal axis wind turbine. Furthermore, most small scale wind turbine systems have been designed at the rated wind speed of around 12m/s. This work is to design a high efficiency 500W class composite VAWT blade which is applicable to relatively low speed region. In the aerodynamic design of blade, the parametric studies are carried out to decide an optimal aerodynamic configuration. The aerodynamic efficiency and performance of the designed VAWT is confirmed by the CFD analysis. The structural design is performed by the load case study, the initial sizing using the netting rule and the rule of mixture, the structural analysis using FEM, the fatigue life estimation and the structural test. The prototype blade is manufactured by the hand lay-up and the matched die molding. The experimental structural test results are compared with the FEM analysis results. Finally, to evaluate the prototype VAWT including designed blades, the performance test is performed using a truck to simulate the various range wind speeds and some measuring equipments. According to the performance evaluation result, the estimated performance is well agreed with the experimental test result in all operating ranges.

Wind Power Output Performance Horizontal and Vertical Axis Wind Turbines for Isolated Small Applications in Saudi Arabia

2014 ◽  
Author(s):  
Luai M. Al-Hadhrami ◽  
Shafiqur Rehman
Keyword(s):  
Wind Turbines ◽  
Vertical Axis ◽  
Horizontal Axis ◽  
Energy Output ◽  
Energy Yield ◽  
Vertical Axis Wind Turbine ◽  
Average Wind Speed ◽  
Maximum Increase ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines

The study evaluated the energy output and plant capacity factor of small wind turbines in the category of 3–10 kW rated power. The effects of hub height on energy output and the PCF have been studied. To achieve the set objectives, hourly average wind speed data measured at 10, 20, 30, and 40 meter and wind direction at 30 and 40 meter above ground level during July 01, 2006 to July 10, 2008 has been utilized. The highest percentage change in annual energy yield (AEY) was obtained for an increase in hub height from 20 to 30 m for both horizontal and vertical wind turbines used in this study. Horizontal axis wind turbines HAWT-1, HAWT-2, and HAWT-6; and vertical axis wind turbines VAWT-1, VAWT-2, and VAWT-4 are recommended for various ranges of loads. Horizontal axis wind turbines were found generally more efficient than the vertical axis wind turbine in the present case. In general, all the turbines showed a maximum increase in energy yield for an increase of 10 m in hub height from 20 to 30m and the annual mean energy yield usually followed the load pattern in the study area. Lastly, the mean turbulence intensity was always less than the value recommended in IEC64100-1 standard.

scholarly journals Optimal Design of Novel Blade Profile for Savonius Wind Turbines

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3484
Author(s):  
Tai-Lin Chang ◽  
Shun-Feng Tsai ◽  
Chun-Lung Chen
Keyword(s):  
Wind Energy ◽  
Drag Force ◽  
Wind Turbines ◽  
Rural Areas ◽  
Large Scale ◽  
Design Method ◽  
Angular Position ◽  
Vertical Axis ◽  
Blade Profile ◽  
Main Concept

Since the affirming of global warming, most wind energy projects have focused on the large-scale Horizontal Axis Wind Turbines (HAWTs). In recent years, the fast-growing wind energy sector and the demand for smarter grids have led to the use of Vertical Axis Wind Turbines (VAWTs) for decentralized energy generation systems, both in urban and remote rural areas. The goals of this study are to improve the Savonius-type VAWT’s efficiency and oscillation. The main concept is to redesign a Novel Blade profile using the Taguchi Robust Design Method and the ANSYS-Fluent simulation package. The convex contour of the blade faces against the wind, creating sufficient lift force and minimizing drag force; the concave contour faces up to the wind, improving or maintaining the drag force. The result is that the Novel Blade improves blade performance by 65% over the Savonius type at the best angular position. In addition, it decreases the oscillation and noise accordingly. This study achieved its two goals.

Vertical axis wind turbine operation in icing conditions: A review study

2021 ◽  
pp. 0309524X2110618
Author(s):  
Syed Abdur Rahman Tahir ◽  
Muhammad Shakeel Virk
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Electricity Production ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Promising Solution ◽  
Review Study ◽  
Accretion Physics

Vertical Axis Wind Turbine (VAWT) can be a promising solution for electricity production in remote ice prone territories of high north, where good wind resources are available, but icing is a challenge that can affect its optimum operation. A lot of research has been made to study the icing effects on the conventional horizontal axis wind turbines, but the literature about vertical axis wind turbines operating in icing conditions is still scarce, despite the importance of this topic. This paper presents a review study about existing knowledge of VAWT operation in icing condition. Focus has been made in better understanding of ice accretion physics along VAWT blades and methods to detect and mitigate icing effects.

Sign in / Sign up

Export Citation Format

Share Document