Vibrational Response of Initially Deformed Bistable Microbeams Under the Combined Effect of Mechanical Shock Loads and Electrostatic Forces

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Jihad E. Alqasimi ◽  
Hassen M. Ouakad

This paper focuses on the influence of sudden drop tests on the nonlinear structural behavior of electrically actuated bi-table shallow microelectromechanical system (MEMS) arches. The assumed structure consists of an initially bell-shaped doubly clamped microbeam with a rectangular cross section. The Euler–Bernoulli beam theory is assumed to model the nonlinear structural behavior of the bistable system under the combined effect of both the direct current (DC) actuating load and the shaking waves. Moreover, the structural model takes into account both geometric midplane stretching and electric actuation nonlinear terms. A multimode Galerkin-based decomposition is used to discretize the beam equations to extract a reduced-order model (ROM). The convergence of the ROM simulations are first verified and furthermore compared to published experimental data. A thorough ROM parametric study showed that the effect of increasing the shallow arch initial rise alter drastically the system behavior from undergoing a uninterrupted snap-through motion to a sudden snap-through instability. Moreover, the arch rise relationship with its shock spectrum response (SSR) is investigated and it was concluded that as increasing the rise value can cause the system to collapse under the combined DC and shock wave loadings if the shock wave duration is lower or near the system fundamental natural period. All the presented graphs in this investigation represent some robust numerical approaches and design tools to help MEMS designers in improving both the reliability and efficiency of these bistable-based microdevices under shaking dynamic environments.

1956 ◽  
Vol 23 (1) ◽  
pp. 103-108
Author(s):  
E. T. Cranch ◽  
Alfred A. Adler

Abstract Using simple beam theory, solutions are given for the vibration of beams having rectangular cross section with (a) linear depth and any power width variation, (b) quadratic depth and any power width variation, (c) cubic depth and any power width variation, and (d) constant depth and exponential width variation. Beams of elliptical and circular cross section are also investigated. Several cases of cantilever beams are given in detail. The vibration of compound beams is investigated. Several cases of free double wedges with various width variations are discussed.


2018 ◽  
Vol 18 (11) ◽  
pp. 1850134 ◽  
Author(s):  
S. Bornassi ◽  
H. M. Navazi ◽  
H. Haddadpour

The vibration of a rotating sandwich beam with magnetorheological elastomer (MRE) as a core between two elastic layers is theoretically analyzed in this paper. This study is focused on the bending vibration along the edgewise direction of a sandwich beam of rectangular cross-section, which, to the best of our knowledge, has not been addressed yet. The classical Euler–Bernoulli beam theory is used to model the dynamic behavior of the elastic layers. In the modeling, the effect of the MRE layer is considered by incorporating its shear strains and the inertia due to shear deformation and bending motion. The governing equations of motion of the rotating sandwich beam are derived by using the Ritz method and the Lagrange’s equations. The effects of the applied magnetic field, core layer thickness, rotational speed, setting angle and hub radius on the natural frequencies and the corresponding loss factors are investigated parametrically. The results show the significant effect of the magnetic field intensity and the MRE layer thickness on the modal characteristics of the MRE sandwich beam.


2006 ◽  
Vol 980 ◽  
Author(s):  
Joel P. McDonald ◽  
Shuwei Ma ◽  
John A. Nees ◽  
Tresa M. Pollock ◽  
Steven M. Yalisove

AbstractPump-probe imaging of femtosecond pulsed laser ablation was performed to investigate the mechanical shock induced on an intermetallic superalloy CMSX-4 during femtosecond laser machining. Time resolved shadowgraphic images were collected of the shock wave produced in the air above the target following laser exposure (0-10.3 nanoseconds). The dimensions of the shock wave were measured as a function of delay time and laser fluence (1.27 J/cm2 - 62.8 J/cm2). Time-resolved shadowgraphic images of the ablation event will be presented, and the corresponding damage morphology as a function of incident laser fluence will be discussed.


Author(s):  
E. Nolde ◽  
A. V. Pichugin ◽  
J. Kaplunov

A direct asymptotic integration of the full three-dimensional problem of elasticity is employed to derive a consistent governing equation for a beam with the rectangular cross section. The governing equation is consistent in the sense that it has the same long-wave low-frequency behaviour as the exact solution of the original three-dimensional problem. Performance of the new beam equation is illustrated by comparing its predictions against the results of direct finite-element computations. Limiting behaviours for beams with large (and small) aspect ratios, which can be established using classical plate theories, are recovered from the new governing equation to illustrate its consistency and also to illustrate the importance of using plate theories with the correctly refined boundary conditions. The implications for the correct choice of the shear correction factor in Timoshenko's beam theory are also discussed.


Sign in / Sign up

Export Citation Format

Share Document