Probabilistic Response of a Bladed Disk With Uncertain Geometry

2019 ◽  
Vol 141 (10) ◽  
Author(s):  
Luigi Carassale ◽  
Andrea Cavicchi ◽  
Silvia Bruzzone ◽  
Michela Marrè Brunenghi
Keyword(s):  
Principal Component Analysis ◽  
Uncertainty Propagation ◽  
Principal Component ◽  
Component Mode Synthesis ◽  
Geometric Imperfection ◽  
Geometric Uncertainties ◽  
Bladed Disk ◽  
Probabilistic Response ◽  
Dynamical Properties ◽  
Full Disk

AbstractGeometric uncertainties in the blade manufacturing process have important consequences in terms of dynamical properties of bladed disks. In this paper, we address the problem of modeling a full bladed disk composed by blades having uncertain geometry. The geometric imperfection of the blades is represented and analyzed according to a procedure previously presented by the authors, based on the principal component analysis (PCA) and the mesh morphing. The dynamical model of the full disk is constructed following the component mode synthesis (CMS) approach. The blade geometry is represented using a probabilistic model constructed from an experimental dataset. The effect of the geometric uncertainties is assessed using a linear uncertainty propagation approach, leading to a procedure that is fast enough to be embedded into a Monte Carlo simulation (MCS) loop.

Probabilistic Response of a Bladed Disk With Uncertain Geometry

2019 ◽  
Author(s):  
Luigi Carassale ◽  
Andrea Cavicchi ◽  
Silvia Bruzzone ◽  
Michela Marrè Brunenghi
Keyword(s):  
Principal Component ◽  
Component Mode Synthesis ◽  
Geometric Imperfection ◽  
Geometric Uncertainties ◽  
Bladed Disk ◽  
Probabilistic Response ◽  
Dynamical Properties ◽  
Linear Propagation ◽  
Synthesis Approach ◽  
Full Disk

Abstract Geometric uncertainties in the blade manufacturing process have important consequences in terms of dynamical properties of bladed disks. In this paper we address the problem of modeling a full bladed disk composed by blades having uncertain geometry. The geometric imperfection of the blades is represented and analyzed according to a procedure previously presented by the authors, based on the principal component analysis and the mesh morphing. The dynamical model of the full disk is constructed following the component mode synthesis approach. The blade geometry is represented using a probabilistic model constructed from an experimental dataset. The effect of the geometric uncertainties is assessed using a linear propagation approach, leading to a procedure that is fast enough to be embedded into a Monte Carlo simulation loop.

Scanning x-ray fluorescence microscopy and principal component analysis

1992 ◽  
Vol 50 (2) ◽  
pp. 1752-1753
Author(s):  
Brian Cross
Keyword(s):  
Principal Component Analysis ◽  
Fluorescence Microscopy ◽  
Spatial Resolution ◽  
High Speed ◽  
Image Acquisition ◽  
Principal Component ◽  
Fluorescence Microscope ◽  
Acquisition Rate ◽  
X Ray ◽  
Speed Up

A relatively new entry, in the field of microscopy, is the Scanning X-Ray Fluorescence Microscope (SXRFM). Using this type of instrument (e.g. Kevex Omicron X-ray Microprobe), one can obtain multiple elemental x-ray images, from the analysis of materials which show heterogeneity. The SXRFM obtains images by collimating an x-ray beam (e.g. 100 μm diameter), and then scanning the sample with a high-speed x-y stage. To speed up the image acquisition, data is acquired "on-the-fly" by slew-scanning the stage along the x-axis, like a TV or SEM scan. To reduce the overhead from "fly-back," the images can be acquired by bi-directional scanning of the x-axis. This results in very little overhead with the re-positioning of the sample stage. The image acquisition rate is dominated by the x-ray acquisition rate. Therefore, the total x-ray image acquisition rate, using the SXRFM, is very comparable to an SEM. Although the x-ray spatial resolution of the SXRFM is worse than an SEM (say 100 vs. 2 μm), there are several other advantages.

A German version of the Intermittent Claudication Questionnaire (ICQ): cultural adaptation and validation

VASA ◽  
2012 ◽  
Vol 41 (5) ◽  
pp. 333-342 ◽  
Author(s):  
Kirchberger ◽  
Finger ◽  
Müller-Bühl
Keyword(s):  
Principal Component Analysis ◽  
Intermittent Claudication ◽  
Completion Time ◽  
Short Form ◽  
Principal Component ◽  
Component Analysis ◽  
German Version ◽  
Average Completion Time ◽  
Sf 36 ◽  
Related Quality

Background: The Intermittent Claudication Questionnaire (ICQ) is a short questionnaire for the assessment of health-related quality of life (HRQOL) in patients with intermittent claudication (IC). The objective of this study was to translate the ICQ into German and to investigate the psychometric properties of the German ICQ version in patients with IC. Patients and methods: The original English version was translated using a forward-backward method. The resulting German version was reviewed by the author of the original version and an experienced clinician. Finally, it was tested for clarity with 5 German patients with IC. A sample of 81 patients were administered the German ICQ. The sample consisted of 58.0 % male patients with a median age of 71 years and a median IC duration of 36 months. Test of feasibility included completeness of questionnaires, completion time, and ratings of clarity, length and relevance. Reliability was assessed through a retest in 13 patients at 14 days, and analysis of Cronbach’s alpha for internal consistency. Construct validity was investigated using principal component analysis. Concurrent validity was assessed by correlating the ICQ scores with the Short Form 36 Health Survey (SF-36) as well as clinical measures. Results: The ICQ was completely filled in by 73 subjects (90.1 %) with an average completion time of 6.3 minutes. Cronbach’s alpha coefficient reached 0.75. Intra-class correlation for test-retest reliability was r = 0.88. Principal component analysis resulted in a 3 factor solution. The first factor explained 51.5 of the total variation and all items had loadings of at least 0.65 on it. The ICQ was significantly associated with the SF-36 and treadmill-walking distances whereas no association was found for resting ABPI. Conclusions: The German version of the ICQ demonstrated good feasibility, satisfactory reliability and good validity. Responsiveness should be investigated in further validation studies.

Multifactorial analysis of clinical laboratory signs, the levels of IL-17A, IL-23, IL-33, IL-35, and specific antibodies in the serum of patients with Lyme borreliosis without erythema migrans

2020 ◽  
Vol 4 (11) ◽  
pp. 676-681
Author(s):  
V.V. Sapozhnikova ◽  
◽  
A.L. Bondarenko ◽  
Keyword(s):  
Principal Component Analysis ◽  
Lyme Borreliosis ◽  
Clinical Laboratory ◽  
Acute Infection ◽  
Erythema Migrans ◽  
Principal Component ◽  
Component Analysis ◽  
Control Group ◽  
Multifactorial Analysis ◽  
Specific Antibodies

Aim: to determine the association between clinical laboratory parameters, the production of cytokines (IL-17A, -23, -33, -35), and specific IgM and IgG in the serum of patients with Lyme borreliosis without erythema migrans. Patients and Methods: complete blood count, the concentrations of IL-17A, -23, -33, -35, and the levels of specific IgM and IgG were measured during acute infection and convalescence (n=30). The control group included age- and sex-matched healthy individuals (n=30). Statistical analysis was performed using the StatSoft Statistica v 10.0 software (parametric and non-parametric methods and multifactorial analysis, i.e., principal component analysis). Results: most (80%) patients with Lyme borreliosis without erythema migrans are the people of working age. In most patients, the combination of the specific antibodies against Borrelia afzelii and Borrelia garinii (76.7%) and severe intoxication and inflammatory process (100%) were detected. Moderate and severe disease associated with meningism was diagnosed in 90% and 10%, respectively. The mean duration of hectic period was 8.3±1.27 days. Abnormal ECG was reported in 40% of patients, i.e., conduction abnormalities in 20%, sinus bradycardia in 16.7%,and sinus tachycardia in 3.3%. The clinical laboratory signs of hepatitis without jaundice were identified in 26.7%. During treatment, the significant reduction in band and segmented neutrophil counts as well as the significant increase in platelet count were revealed compared to these parameters at admission. Abnormal cytokine levels (i.e., the increase in IL-17A, -23, -33 and the deficiency of IL-35) were detected. Conclusions: multifactorial analysis has demonstrated that the severity of immunological abnormalities in patients with Lyme borreliosis without erythema migrans is associated with fever, cardiac and liver disorders, the high levels of IL-23 and IL-33, and the lack of IL-35 and specific IgM and IgG. KEYWORDS: tick-borne borreliosis, Lyme disease without erythema migrans, clinical laboratory signs, cytokines, specific antibodies, multifactorial analysis, principal component analysis. FOR CITATION: Sapozhnikova V.V., Bondarenko A.L. Multifactorial analysis of clinical laboratory signs, the levels of IL-17A, IL-23, IL-33, IL-35, and specific antibodies in the serum of patients with Lyme borreliosis without erythema migrans. Russian Medical Inquiry. 2020;4(11):676–681. DOI: 10.32364/2587-6821-2020-4-11-676-681.

Sign in / Sign up

Export Citation Format

Share Document