A Nonlinear Reduced-Order Model of the Corpus Callosum Under Planar Coronal Excitation

2020 ◽  
Vol 142 (9) ◽  
Author(s):  
Alireza Mojahed ◽  
Javid Abderezaei ◽  
Mehmet Kurt ◽  
Lawrence A. Bergman ◽  
Alexander F. Vakakis

Abstract Traumatic brain injury (TBI) is often associated with microstructural tissue damage in the brain, which results from its complex biomechanical behavior. Recent studies have shown that the deep white matter (WM) region of the human brain is susceptible to being damaged due to strain localization in that region. Motivated by these studies, in this paper, we propose a geometrically nonlinear dynamical reduced order model (ROM) to model and study the dynamics of the deep WM region of the human brain under coronal excitation. In this model, the brain hemispheres were modeled as lumped masses connected via viscoelastic links, resembling the geometry of the corpus callosum (CC). Employing system identification techniques, we determined the unknown parameters of the ROM, and ensured the accuracy of the ROM by comparing its response against the response of an advanced finite element (FE) model. Next, utilizing modal analysis techniques, we determined the energy distribution among the governing modes of vibration of the ROM and concluded that the demonstrated nonlinear behavior of the FE model might be predominantly due to the special geometry of the brain deep WM region. Furthermore, we observed that, for sufficiently high input energies, high frequency harmonics at approximately 45 Hz, were generated in the response of the CC, which, in turn, are associated with high-frequency oscillations of the CC. Such harmonics might potentially lead to strain localization in the CC. This work is a step toward understanding the brain dynamics during traumatic injury.

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
M. Utsumi ◽  
H. Tazuke

The vibration of a large tank caused by an explosion that occurs at a place apart from the tank is analyzed. Because the tank is double-walled and the liquid is contained in the inner shell, the vibration of the outer shell subjected to the explosion-induced pressure wave that travels outside the tank is analyzed without considering the liquid. A cylindrical tank with a spherical roof is considered as a realistic three-dimensional (3D) model, and a computationally efficient semi-analytical method that is applicable to the 3D geometry of the tank–fluid interface is investigated. First, cylindrical coordinates are introduced such that the longitudinal axis intersects the center of the tank base and is normal to the explosion source plane, thereby defining the inner and outer radii of the analysis domain of the fluid motion. Next, the solutions are expressed in terms of coordinate-dependent eigenvalues and a reduced order model is developed by applying the Galerkin method to the governing equations that take into account the compressibility and nonlinearity of the fluid motion. The method is verified by comparing with earlier results obtained by a numerical method. We also analyze the vibration of the tank shell by developing its finite element (FE) model and transforming the model into modal equations to develop a reduced order model for the fluid–tank system.


2008 ◽  
Vol 44 (14) ◽  
pp. 843
Author(s):  
M. Condon ◽  
G. Grahovski ◽  
D. Deschrijver

Transmission Line model are an important role in the electrical power supply. Modeling of such system remains a challenge for simulations are necessary for designing and controlling modern power systems.In order to analyze the numerical approach for a benchmark collection Comprehensive of some needful real-world examples, which can be utilized to evaluate and compare mathematical approaches for model reduction. The approach is based on retaining the dominant modes of the system and truncation comparatively the less significant once.as the reduced order model has been derived from retaining the dominate modes of the large-scale stable system, the reduction preserves the stability. The strong demerit of the many MOR methods is that, the steady state values of the reduced order model does not match with the higher order systems. This drawback has been try to eliminated through the Different MOR method using sssMOR tools. This makes it possible for a new assessment of the error system Offered that the Observability Gramian of the original system has as soon as been thought about, an H∞ and H2 error bound can be calculated with minimal numerical effort for any minimized model attributable to The reduced order model (ROM) of a large-scale dynamical system is essential to effortlessness the study of the system utilizing approximation Algorithms. The response evaluation is considered in terms of response constraints and graphical assessments. the application of Approximation methods is offered for arising ROM of the large-scale LTI systems which consist of benchmark problems. The time response of approximated system, assessed by the proposed method, is also shown which is excellent matching of the response of original system when compared to the response of other existing approaches .


Sign in / Sign up

Export Citation Format

Share Document